The Universal Selection Source: Polymer Additives

Product News

BASF Improves Polyether Polyols for Low-emission Vehicle Interiors

Published on 2017-07-25. Author : SpecialChem

BASF has improved the process for manufacturing Lupranol® (polyether polyol). The car components made of BASF polyurethane systems emit an average of 20 percent less aldehyde.

Lupranol® Enables Car Manufacturers to Meet Government Regulations

This polyol helps automotive suppliers to lower VOC emissions in vehicle interiors. Following the process change at BASF’s Asian production sites, the modification will take place in the US plants.
BASF improves Lupranol® for lower emissions in car interiors

Improved Polyol Grades

  • Alongside isocyanate, polyol is the starting product for polyurethane foam systems.
  • The emissions are optimized by improving finishing processes of Lupranol®
  • The mechanical properties of the material remain unchanged during the processing steps. 
  • There is no need for elaborate tests or renewed approvals of the PU systems based on these improved polyol grades. 
  • BASF markets the PU systems for flexible, semi-rigid and integral foams.

BASF 's Lupranol® grades contributes to automotive components with ever lower emissions.

BASF PU systems are tested internally as well as by certified test laboratories like Imat-Uve and Institut Fresenius.

The improvement of the emission values varies from part to part: An average reduction of 20 percent is possible.

Governments are demanding lower emissions for vehicle interiors to:
  • Reduce the impact of volatile substances on the health of car drivers
  • Lessen the typical new-car smell. 

The focus is on aldehydes such as formaldehyde, acetaldehyde and propionaldehyde, as well as aromatics from polyurethanes.

BASF is working intensively on developing PU systems which allow for car components with lower emissions.

PS: If you liked this News, you might enjoy our Polymer Additives Product Newsletter. All the Product News delivered once a week right to your inbox. Sign up here!

Source: BASF
Be the first to comment on "BASF Improves Polyether Polyols for Low-emission Vehicle Interiors"

Leave a comment

Your email address and name will not be published submitting a comment or rating implies your acceptance to SpecialChem Terms & Conditions


Rigid PVC Molding Defects: How to Solve Splay, Blush, and Peel

Troubleshoot faster these look-alike molding defects with a logical solving approach. You'll save time and you'll have results!


Back to Top