ADK STAB 135A by ADEKA Polymer Additives Europe is diphenyl isodecyl phosphate-based processing stabilizer. Exhibits excellent color improvement and high process stability. It is suitable for the... view more

ADK STAB 3010 by ADEKA Polymer Additives Europe is trialkylphosphite-based antioxidant. Exhibits excellent thermal stability and hydrolysis resistance. Shows high resistance to discoloration during... view more

ADK STAB TPP by ADEKA Polymer Additives Europe acts as an antioxidant. It is an excellent peroxide decomposer, halogen acceptor and masking agent. It is very common arylphosphite. Exhibits good... view more

ADK CIZER C-79E by ADEKA Polymer Additives Europe is trioctyl trimellitate-based plasticizer in wires and cables, especially high temperature wire insulations, gaskets and paste moldings. Offers very good compatibility with... view more

ADK CIZER C-810L by ADEKA Polymer Additives Europe is linear trialkyl trimellitate-based plasticizer. Offers very good high aging stability. Possesses low temperature flexibility. Exhibits low... view more

ADK CIZER C-8LS by ADEKA Polymer Additives Europe is antioxidant-free, tris octyl trimellitate type plasticizer. It imparts heat resistance, long term aging stability, low volatility and excellent... view more

ADK CIZER RS-700 by ADEKA Polymer Additives Europe is polyether ester plasticizer. It combines good thermal aging and low temperature resistance. ADK CIZER RS-700 is recommended for use with HNBR... view more

ADK CIZER RS-735 by ADEKA Polymer Additives Europe is polyether ester-based plasticizer. It shows good thermal ageing and low temperature resistance. ADK CIZER RS-735 is recommended for for use with... view more

ADK STAB 517 by ADEKA Polymer Additives Europe is liquid phenyl diisodecyl phosphite-based antioxidant. It provides good thermal and color stability. ADK STAB 517 is recommended for PVC, styrenics... view more

ADK STAB A-514 by ADEKA Polymer Additives Europe is a synergistic antioxidant blend. It is suitable for processing and long term thermal stabilization for all plastics. ADK STAB A-514 is recommended... view more

ADK STAB A-614 by ADEKA Polymer Additives Europe is synergistic antioxidant blend of a hindered phenolic antioxidant with phosphite co-stabilizing antioxidant. It is suitable for processing and long... view more

ADK STAB AO-26 by ADEKA Polymer Additives Europe is a novel antioxidant for use in XLPE power cable applications. It provides improved heat stability and cost effectiveness. It is is suitable for... view more

ADK STAB AO-30 by ADEKA Polymer Additives Europe is highly effective phenolic antioxidant. Offers long term thermal stability with outstanding extraction resistance. ADK STAB AO-30 is used for the... view more

ADK STAB AO-40 by ADEKA Polymer Additives Europe is an effective antioxidant. It exhibits excellent solubility. It is highly effective in polyamides. It is suitable for long term thermal stability... view more

ADK STAB AO-412S by ADEKA Polymer Additives Europe is a highly effective high molecular weight thioether-based antioxidant. It has low volatility, extractability and hence contributes to less odor... view more

ADK STAB AO-50 by ADEKA Polymer Additives Europe is highly effective antioxidant. Offers good compatibility with most common polymers. Possesses good substitute for BHT. ADK STAB AO-50 is... view more

ADK STAB AO-60 by ADEKA Polymer Additives Europe is general purpose, high molecular weight, versatile and highly effective antioxidant. It shows synergistic activity with phosphite process... view more

ADK STAB AO-80 by ADEKA Polymer Additives Europe is a unique phenolic antioxidant with respect to structure and properties. It is particularly suitable when higher standards of long term heat... view more

ADK STAB AS-301 by ADEKA Polymer Additives Europe is a polymeric anti-static agent. It offers rapid functioning and anti-dust properties. It helps to maintain the mechanical properties of the... view more

ADK STAB AS-301E by ADEKA Polymer Additives Europe is a polymeric permanent antistatic agent. Its working principle is based on static dissipative action. It offers long lasting antistatic effects in polyolefins at... view more

ADK STAB AX-71 by ADEKA Polymer Additives Europe is an excellent lubricant for EVA and TPE. It is also an effective deactivator of catalysts used in polyester polymerizations. ADK STAB AX-71 is... view more

ADK STAB CDA-1 by ADEKA Polymer Additives Europe is a multi-functional, sophisticated metal deactivator containing a heterocyclic group. It prevents oxidative degradation caused by copper or other... view more

ADK STAB CPS-507 by ADEKA Polymer Additives Europe is a solid Al-Mg-Zn complex type stabilizer. It provides excellent long-term heat stability. It is recommended for flexible interior PVC... view more

ADK STAB CPS-995 by ADEKA Polymer Additives Europe is an aluminium-magnesium-zinc complex type stabilizer. It offers excellent (extremely) high to moderate temperature heat stability. It imparts... view more

ADK STAB FP-2100JC by ADEKA Polymer Additives Europe is a halogen-free intumescent flame retardant. The smoke & CO suppression level is same as ATH or MDH-type flame retardant. Offers high thermal... view more

ADK STAB FP-2200S by ADEKA Polymer Additives Europe is a nitrogen-phosphorus based flame retardant designed for for PP, PE and EVA and other polyolefin-based compounds. It has a good color-, heat... view more

ADK STAB FP-2500S by ADEKA Polymer Additives Europe is nitrogen-phosphorus based flame retardant. It provides very low smoke release, smoke density and CO & CO2 emissions. It also offers good heat... view more

ADK STAB FP-2600U by ADEKA Polymer Additives Europe is nitrogen-phosphorus based flame retardant. It reduces the heat release rate and contributes to improved smoke suppression. UL-94 V-0 can be... view more

ADK STAB FP-600 by ADEKA Polymer Additives Europe is a high molecular weight, liquid phosphate ester based flame retardant with good processing properties. Its thermal stability provides superior... view more

ADK STAB FP-900L by ADEKA Polymer Additives Europe is a bisphenol A-free, phosphate ester-based flame retardant. When used with PC/ABS, it offers processing benefits as it is less plasticizing than... view more

ADK STAB FP-T80 by ADEKA Polymer Additives Europe is N-alkoxy type, halogen-free flame retardant. It has excellent compatibility with low polar polymers like polyolefin, low tendency for migration... view more

ADK STAB HP-10 by ADEKA Polymer Additives Europe is phosphite-based antioxidant. It provides excellent color and melt stability during polymer processing as well as good hydrolytic stability. ADK... view more

ADK STAB LA-1000 by ADEKA Polymer Additives Europe is a high molecular weight triazine-type UV absorber. It offers protection and extension to life of polymers. It is suitable for processing... view more

ADK STAB LA-31 by ADEKA Polymer Additives Europe is a high molecular weight UV absorber based on hydroxy-phenyl benzotriazole. It protects polymers from UV radiation and extends its exterior... view more

ADK STAB LA-31R by ADEKA Polymer Additives Europe is a less volatile, high molecular weight benzotriazole type UV absorber. Protection against UV degradation. ADK STAB LA-31R provides photostability... view more

ADK STAB LA-402AF by ADEKA Polymer Additives Europe is a high performance, hindered amine light stabilizer. It provides excellent light and heat stability. It is suitable for filled and pigmented... view more

ADK STAB LA-402XP by ADEKA Polymer Additives Europe is high performance light stabilizer. It provides very good light and heat stability. It is recommended for use in automotive parts... view more

ADK STAB LA-40MP by ADEKA Polymer Additives Europe is a secondary HALS offered in a PP masterbatch (50%). It is suitable for polyolefins and styrenic polymers alike. It is recommended for automotive interior and dashboard... view more

ADK STAB LA-46 by ADEKA Polymer Additives Europe is UV absorber. It offers low volatility but an excellent thermal stability and discoloration resistance against heat. ADK STAB LA-46 offers high... view more

ADK STAB LA-502 by ADEKA Polymer Additives Europe is novel light stabilizer. Provides very good light & heat stability. ADK STAB LA-502 is used for interior automotive applications... view more

ADK STAB LA-52SC by ADEKA Polymer Additives Europe is highly effective N-methylated HALS (hindered amine light stabilizer). Offers high level of bloom and fogging resistance. ADK STAB LA-52SC... view more

ADK STAB LA-63P by ADEKA Polymer Additives Europe is a high molecular weight HALS. It shows an excellent UV protection by scavenging radicals generated by photo degradation. ADK STAB LA-63P exhibits... view more

ADK STAB LA-704SI by ADEKA Polymer Additives Europe is a light stabilizer system based on low molecular weight methylated HALS. It is available in 50% active form on a synthetic silica carrier. It... view more

ADK STAB LA-81 by ADEKA Polymer Additives Europe is a high performing third generation HALS (hindered amine light stabilizer). It can stabilize polymers against photo-degradation even in strong... view more

ADK STAB LS-12 by ADEKA Polymer Additives Europe is an oligomeric lubricant which imparts excellent lubricity and release properties to plasticized and semi-rigid PVC compounds. ADK STAB LS-12 is designed for calendering... view more

ADK STAB MB.NA.05 by ADEKA Polymer Additives Europe is a nucleating agent masterbatch. It contains 10% ADK STAB NA.11 dispersed in a homopolymer grade of polypropylene having an MFI 10. ADK STAB... view more

ADK STAB MB.NA.07 by ADEKA Polymer Additives Europe is a nucleating agent masterbatch. It contains 10% ADK STAB NA-21 dispersed in a homopolymer grade of polypropylene having an MFI 10. It does not... view more

ADK STAB NA-11 by ADEKA Polymer Additives Europe is a nucleating agent for improving mechanical properties such as stiffness and flexural modulus. It is used to improve productivity of automotive... view more

ADK STAB NA-11UH by ADEKA Polymer Additives Europe is a nucleating agent. It improves the mechanical properties of PP such as stiffness and flexural modulus, transparency and rigidity. It has good... view more

ADK STAB NA-21 by ADEKA Polymer Additives Europe is a nucleating and clarifying agent. This grade improves both transparency and mechanical properties. ADK STAB NA-21 shows outstanding performance... view more

ADK STAB NA-27 by ADEKA Polymer Additives Europe is a high performance nucleating agent for polypropylene. Offers excellent performance, in particular high flexural modulus, crystallization... view more

ADK STAB NA-71 by ADEKA Polymer Additives Europe is a nucleating and clarifying agent. This grade improves mechanical properties including stiffness & flexural modulus, transparency and thermal... view more

ADK STAB NA-902 by ADEKA Polymer Additives Europe is a general purpose nucleating agent for PP homopolymer and impact-copolymers. It raises crystallization temperature of PP allowing improved... view more

ADK STAB PEP-36 by ADEKA Polymer Additives Europe is phosphite-based antioxidant. It exhibits good hydrolytic stability and processing stability efficiency. It allows lower loadings and is... view more

ADK STAB RUP-110 by ADEKA Polymer Additives Europe is Al-Mg-Zn type heat stabilizer. It provides excellent retention of color and resistance to thermal aging which does not interfere with electrical... view more

ADK STAB RUP-177 by ADEKA Polymer Additives Europe is heat stabilizer. It provides excellent color retention and resistance to thermal aging which does not interfere with electrical properties. ADK... view more

ADK STAB RUP-190E by ADEKA Polymer Additives Europe is a lead-free, Al-Mg-Zn type heat stabilizer. It provides high temperature heat stability, high resistance to aging, electrical properties and mechanical properties. It is... view more

ADK STAB RX-305 by ADEKA Polymer Additives Europe is Ca-Zn type heat stabilizer. It is designed to fit the requirements for PVC injection molded articles in contact with potable water such as... view more

ADK STAB RX-308 by ADEKA Polymer Additives Europe is calcium-zinc heat stabilizer. It provides high vicat temperature. ADK STAB RX-308 is used in air coolers and sewer & gutter fittings. The... view more

ADK STAB RX-405 by ADEKA Polymer Additives Europe is a calcium-zinc complex type heat stabilizer. It is suitable for PVC. It provides weatherability and long-term aging. It can be co-formulated with... view more

ADK STAB SP-2016 by ADEKA Polymer Additives Europe is a Ca-Zn based heat stabilizer providing excellent transparency, heat and color stability. It is recommended for flexible and semi-rigid films... view more

CCP STAB 3012 by ADEKA Polymer Additives Europe is a phosphite antioxidant. It is a clear liquid that provides excellent thermal stability and color stability. Recommended for polyurethane (PUR) and polyvinylchloride (PVC)... view more

CCP STAB 390E by ADEKA Polymer Additives Europe is an excellent phenolic antioxidant with the advantage of a pumpable liquid. It is clear to light yellowish liquid fit for processes requiring liquids, emulsions or... view more

CCP STAB 628 by ADEKA Polymer Additives Europe is a liquid phosphite antioxidant. It provides excellent thermal stability and color stability. Recommended for polyurethane (PUR) and polyvinylchloride (PVC) applications... view more

CCP STAB AS-4500 by ADEKA Polymer Additives Europe is a high performance liquid phosphite antioxidant providing excellent heat stability. It offers excellent color performance especially in preventing heat discoloration. It... view more

ORGATER STAT 09S by ADEKA Polymer Additives Europe is a distilled grade of glycerol monostearate having a minimum monoester content of 95%. It is off-white bead, also available in pellet form for easy handling. It reduces... view more

Orgater AO.OH.98 by ADEKA Polymer Additives Europe is bi-functional hindered phenolic type antioxidant. Offers very good compatibility. Orgater AO.OH.98 is recommended for use in plastic... view more

Orgater BA.H.07 by ADEKA Polymer Additives Europe is a blowing agent. It is suitable for PP/PET-fine cells structure. It is designed for extrusion. Orgater BA.H.07 is suitable for PP decorative... view more

Orgater BA.H02.F by ADEKA Polymer Additives Europe is a blowing agent. It is recommended for application in the extrusion of foamed profiles and boards made from PVC in combination with... view more

Orgater HALS 62 by ADEKA Polymer Additives Europe is a light stabilizer based on an oligomeric polymer. It has synergistic performance with UV light absorbers. It exhibits low volatility and high... view more

Orgater HALS 77-77G by ADEKA Polymer Additives Europe is a hindered amine light stabiliser (HALS) suitable for most polymers. It offers excellent protection for polymers against degradation by... view more

Orgater HALS 92 by ADEKA Polymer Additives Europe is a hindered amine light stablizer for use in polymers. Orgater HALS 92 is recommended for use in polyurethane, unsaturated polyester, acrylics... view more

Orgater HALS 94 by ADEKA Polymer Additives Europe is an oligomeric, sterically hindered amine light stabilizer particularly useful for the protection of polymers used in automotive applications. It... view more

Orgater HT by ADEKA Polymer Additives Europe is a synthetic hydrotalcite grade which offers excellent heat stability. It provides excellent processing characteristics in engineering plastics and... view more

Orgater MB.BA.24 by ADEKA Polymer Additives Europe is a foaming agent. Suitable for PP, PE, PS for injection molding applications mainly and contains some special additives to minimize the risk of corrosion of the mold. In... view more

Orgater MB.BA.25 by ADEKA Polymer Additives Europe is a foaming agent. It is used for very fine cells foaming of resins like PP and HDPE specially for extrusion blow molding applications. Recommended working temperature is... view more

Orgater MDA.P.10 by ADEKA Polymer Additives Europe is a bi-functional metal deactivator. It exhibits antioxidant properties. It is compatible with thermoplastics. It is recommended for use in wire and cable applications... view more

Orgater MDA.P.11 by ADEKA Polymer Additives Europe is a metal deactivator. This grade is suitable for thermoplastics. Orgater MDA.P.11 is designed for use in wire and cable applications... view more

Orgater MI.NA.08 by ADEKA Polymer Additives Europe is sodium benzoate-based nucleating and clarifying agent. Its extra fine particle size distribution with high surface to weight ratio making it... view more

Palmarole BA.F2.E by ADEKA Polymer Additives Europe is chemical blowing and nucleating agent. Offers uniform and fine celled foam structure. Palmarole BA.F2.E is recommended for foaming thermoplastics in injection molding and... view more

Palmarole BA.F2.S by ADEKA Polymer Additives Europe is chemical blowing and nucleating agent. Palmarole BA.F2.S is suitable for foaming thermoplastics in injection molding and extrusion for foaming sheet and profile... view more

Palmarole BA.F4.E by ADEKA Polymer Additives Europe is chemical blowing and nucleating agent. Used for foaming thermoplastics in injection molding and extrusion. Palmarole BA.F4.E offers uniform and... view more

Palmarole BA.F4.E MG by ADEKA Polymer Additives Europe is chemical blowing agent. Used for foaming thermoplastic resins, especially for polyolefins. Palmarole BA.F4.E MG provides uniform and fine-celled foam... view more

Palmarole BA.F4.S by ADEKA Polymer Additives Europe is chemical blowing and nucleating agent. Palmarole BA.F4.S is used for foaming thermoplastics in injection molding and extrusion for foaming... view more

Palmarole BA.H.02 by ADEKA Polymer Additives Europe is a chemical blowing agent. Ideal for foamed profiles and plates made from rigid PVC in combination with azodicarbonamide powder. Palmarole BA.H.02 is used in foaming of... view more

Palmarole BA.H.03 by ADEKA Polymer Additives Europe is chemical blowing agent. Offers high gas yield at lower temperatures. Palmarole BA.H.03 is used for foaming thermoplastics in injection molding and extrusion... view more

Palmarole BA.H.04 by ADEKA Polymer Additives Europe is chemical blowing and nucleating agent. Used for foaming thermoplastics in injection molding and extrusion. Palmarole BA.H.04 offers uniform and... view more

Palmarole BA.H.06 by ADEKA Polymer Additives Europe is chemical blowing and nucleating agent. Palmarole BA.H.06 is used for foaming thermoplastics in injection molding and extrusion... view more

Palmarole BA.K2.E by ADEKA Polymer Additives Europe acts as a chemical blowing agent. Designed for fine-celled foaming of thermoplastic resins. Palmarole BA.K2.E is used in PP-ribbons and films... view more

Palmarole BA.K3.EF by ADEKA Polymer Additives Europe is chemical blowing agent. Used for foaming thermoplastic resins, especially for foaming of PP-ribbons and-films. Palmarole BA.K3.EF offers glossy surface... view more

Palmarole BA.K4.C by ADEKA Polymer Additives Europe is chemical blowing agent. It is used for foaming thermoplastic resins, especially for PC. Palmarole BA.K4.C is suitable for use in injection... view more

Palmarole BA.K4.S by ADEKA Polymer Additives Europe acts as a chemical blowing agent. Designed for fine-celled foaming of thermoplastics by injection molding and extrusion. Palmarole BA.K4.S is suitable for foaming PS and ABS sheet... view more

Palmarole BA.K5.S by ADEKA Polymer Additives Europe is chemical blowing agent. This grade is used for fine-celled foaming of thermoplastic resins like PS, ABS and PPO. Palmarole BA.K5.S is designed... view more

Palmarole BA.M4.E by ADEKA Polymer Additives Europe is chemical blowing agent. Provides relatively high gas yield and fine celled foam. Palmarole BA.M4.E is suitable for foaming thermoplastic resins... view more

Palmarole BA.M7.E by ADEKA Polymer Additives Europe is chemical blowing agent. Provides relatively high gas yield and fine celled foam. Palmarole BA.M7.E is recommended for foaming thermoplastic... view more

Palmarole EXP 141/ 94 by ADEKA Polymer Additives Europe is chemical blowing agent. This grade is suitable for fine-celled foaming of PP/PS/PET resins. Palmarole EXP 141/ 94 is designed for... view more

Palmarole EXP 141/16 by ADEKA Polymer Additives Europe is chemical blowing agent. Palmarole EXP 141/16 is used in foaming of thermoplastic resins by injection moulding and extrusion particularly... view more

Palmarole MB.BA.04 by ADEKA Polymer Additives Europe is a chemical blowing agent. This masternatch is used in fine-celled foaming of PVC, polyolefins, styrenics and TPE resins. Palmarole MB.BA.04 is designed for processing by injection... view more

Palmarole MB.BA.10 by ADEKA Polymer Additives Europe is a blowing agent based on acrylic polymer. Suitable for fine-celled foaming of PVC, polyolefins, styrenics and TPE resins by extrusion... view more

Cross-linker or chain extender... view more

Metal deactivator. For polyolefins, ABS and others... view more

Hindered amine light stabilizer. Provides a high level of protection against UV degradation. Resistant to discoloration during UV exposure and heat aging... view more

Standard hindered amine light stabilizer. Provides very good light stability... view more

ADK STAB LA-7RD by Adeka Palmarole is a standard hindered amine light stabilizer... view more

Phosphite antioxidant. Offers very good heat resistance. Possesses versatile processing and /colour stabiliser... view more

PVC core stabilizer. Offers very good light stability. Provides very good wide processability window... view more

High molecular weight HALS. Used for polyolefins, styrenic polymers, sealants, PVC and others. Provides very good light stability and low volatility... view more