OK
The material selection platform
Polymer Additives
The material selection platform
Polymer Additives
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris

BRUGGOLEN® TP-C1312

Technical Datasheet | Supplied by Brüggemann
BRUGGOLEN® TP-C1312 by Brüggemann acts as an impact modifier for AP-NYLON® casting. It creates the bridge between unmodified cast polyamide and highly impact-resistant NYRIM® PA6 block copolymers, in terms of cost and performance. Used for the production of AP-NYLON® products containing 3 to 20% of elastomer. It is based on an elastomeric polyetherpolyol and chemically bonded to an activator. It is incorporated as a soft polymer segment into the polyamide 6 during the anionic polymerization. It offers impact strength and toughness. BRUGGOLEN® TP-C1312 ranges from 3 to 15%, for very low E-moduli higher dosage levels of up to 40% are possible. The shelf life of the product is 12 months (unopened, dry, 25°C) conditions.
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
BRUGGOLEN® TP-C1312
Technical Datasheet | Supplied by Brüggemann
REQUEST A SAMPLE ORIGINAL DATASHEET CONTACT SUPPLIER
Product Type
Impact Modifiers
Physical Form
Liquid
Appearance
Colorless
Product Status
COMMERCIAL
Applications/ Recommended for
  • PA, Nylon
  • Mechanical/ physical performance > Impact resistance

BRUGGOLEN® TP-C1312 Properties

Property

Value & Unit
Test Condition
Test Method
Viscosity
400 - 800 mPa-s
(At 50°C)
Bulk Density
1 g/cm3
(At 20°C)

Want to list or
update your products?
Want to report errors or
suggest improvements?
Access Reliable
Product Information

Database of 55262 Polymer Additives,
reviewed and updated daily

Improve your Product
Selection Experience

Open your choices, compare products,
ask for samples, contact suppliers

Keep-up with latest
Technical Solutions

Be inspired and never miss again crucial
innovations with our weekly email updates

Back to Top