FilmLink® 2029 by Imerys is an untreated grounded calcium carbonate. It improves mechanical, rheological, optical and dispersion properties. The coating also makes these fine products less... view more

Modified barium metaborate containing around 7.5% Silicate... view more

view more

Uniplex 262 is a 1,4-cyclohexanedimethanol dibenzoate. It is a non-phthalate dibenzoate plasticizer and modifier for a wide range of polymers. Improves overall performance properties here, i.e... view more

Ca/Zn liquid stabiliser, low phenol, pTBBA, 2 EHA free. Offers very good long term heat stability. Displays a very good initial color, transparency and color retention. Can be used for plastisols’... view more

Lastab CF 244M by Lamberti is Zn liquid stabilizer in plasticizer, intended for plastisols with anti-fog properties. Displays a good long-term heat stability, a very good color retention and... view more

Liquid Ca/Zn stabilizer. Used for the production of anti-fog vinyl articles obtained by spread coating. Displays a very good long term heat stability, a good color retention and an acceptable... view more

Lubex 90 by Lamberti is viscosity depressant. Because of its low volatility and nonflammability it allows to limit the fumes problems, loss in weight as well as storage risks. Is fully compatible... view more

Dimethylolpropionic Acid (DMPA) by Lemman Laboratories International acts as a dispersing agent. It is odorless, and appears as a free flowing white crystal with molecular weight of 134.13. It can be used in water soluble PU system, water... view more

Solplus™ DP700 by Lubrizol is a 100% active polymeric dispersant. Improves filler and pigment dispersion and stability. Provides increased pigment/filler wetting and loadings as well as more... view more

Solplus™ K500 by Lubrizol is a 100% active polymer. It acts as a dispersing agent. Typical dosage is 1-3% depending on the weight of pigment/filler dispersed. It offers improved pigment/filler... view more

POLYBATCH® CA 600 N by LyondellBasell is a flame retardant masterbatch. It can be applied at elevated temperature upto 340°C. It is compatible with LDPE and LLDPE. It is used in blown film... view more

POLYBATCH® CRR 3971 by LyondellBasell is a release agent masterbatch with low-density polyethylene as carrier. It prevents LDPE from chill roll sticking during extrusion without damaging the... view more

POLYBATCH® FSU 1163 by LyondellBasell is a slip/antiblock masterbatch. It is a blend of superamide and silica. It has much slower speed of migration compared to regular slip/antiblock masterbatch... view more

Light stabilizer effective for a broad range of UV absorption. Low color contribution, low volatility and excellent solubility. Also provides ultraviolet protection in a wide variety of polymeric... view more

UV absorber highly recommended for protective coatings. Does not cause yellowing. Provides excellent protection in a variety of automotive coating substrates. Has excellent solubility in urethane... view more

Antioxidant and metal deactivator highly effective in hindering the harmful effect of copper conductors upon polypropylene, high and low density polyethylene and some thermoplastic elastomers used... view more

Solvent-based products which looks like a colorless and clear film coating, which bonds to the surface. Provides the following benefits : ease of application, semi-permanent release surface, not... view more

Solvent-based products. Semi-permanent and thermally stable release coating. Provides the following benefits : ease of application, semi-permanent release surface, not interfering with any post... view more

Water dilutable PTFE dispersion suitable for release of silicone rubber. Provides the following benefits : multiple release cycles, no transfer to molded parts, no interference with post finishing... view more