Coupsil® 6109 by Evonik acts as a reinforcer/ filler in rubber compounds. It is precipitated silica surface-modified with organosilane. It imparts greater tensile strength, higher moduli and reduced... view more

Coupsil® 8113 by Evonik is a reinforcing filler based on precipitated silica, surface modified with organosilane Si 69®. It reacts with unsaturated polymer during vulcanization under formation of... view more

Coupsil® VP 6411 by Evonik acts as a reinforcing filler in rubber compounds. It imparts greater tensile strength, higher moduli, optimized dynamic properties, lower compression set values and better... view more

Coupsil® VP 6508 by Evonik acts as a reinforcing filler. Designed for peroxide-cured rubber compounds where optimum technical properties are required. Imparts greater tensile strength, higher modulus... view more

HYDREX® R is a filler by Evonik. Offers improved color quality (chroma or vividness) at a reduced cost in the compounding of colored elastomers. Designed for hoses, bumps and tires. Suitable for... view more

Imicure® AMI-2 by Evonik is a catalytic, elevated-temperature curing agent for epoxy resins. It is an excellent dicyandiamide accelerator. Imicure® AMI-2 is used in electrical laminates, pre-preg... view more

Imicure® AMI-2T by Evonik is an elevated-temperature curing agent for epoxy systems. It is readily compatible with both liquid and solid epoxy resins. Recommended at low loadings of 1-5 phr. It is a... view more

Imicure® Imidazole by Evonik is an elevated-temperature curing agent for epoxy resins. Used in pre-preg composites and encapsulation. Offers very good acceleration. Imicure® Imidazole provides very... view more

JAYHAWK™ BTDA™ Microfine by Evonik is a micronized, light-tan, free-flowing co-monomer in polyimide synthesis. Used to enhance thermal and fire resistance. It has a variable pot life for optimal... view more

JAYHAWK™ BTDA™ Polymer Fine is a co-monomer by Evonik. Designed for polyimide synthesis to enhance thermal and fire resistance. It has a variable pot life for optimal processing and an optimum... view more

JAYHAWK™ PMDA Ultrapure by Evonik is a co-monomer in polyimide synthesis. It enhances thermal and fire resistance. It has a variable pot life for optimal processing and an optimum purity and... view more

TEGIN® 90 by Evonik is glycerol monostearate. Used as an antistatic agent in LL/LD-PE, HD-PE and PP for film production and injection molded parts. TEGIN® 90 provides resistivity control... view more

Dispersing agent. Used in PP, PE and engineering plastics. Offers optimized distribution of organic and inorganic pigments in color concentrates and dispersion of inorganic fillers as chalk, talc or... view more

TEGOMER® P 111 by Evonik is dispersing agent. It is used in PP. It offers optimized distribution of organic and inorganic pigments in color concentrates... view more

Dispersing agent. Used in PP, PE and engineering plastics. Offers optimized distribution of organic and inorganic pigments in color concentrates... view more

TEGOMER® P 131 by Evonik is dispersing agent. Used in PP, PE and engineering plastics. TEGOMER® P 131 offers optimized distribution of organic and inorganic pigments in color concentrates... view more

ULTRASIL® 360 by Evonik is precipitated silica. It is used as reinforcer filler in the rubber industry. It offers very good processability. It imparts a low compression set. It exhibits very good... view more

ZEOLEX® 23A by Evonik is a precipitated sodium alumina silicate. It offers improved flow properties, faster production rates and increased capacity. It provides reduced production downtime and... view more

ZEOLEX® 80 by Evonik is a precipitated sodium alumina silicate. It offers reduced pigment material costs, high brightness, outstanding sheen control. It provides improved color pigment/ TiO2... view more

ZEOTHIX® 265 by Evonik is a rheology modifier based on micronized precipitated silica. It offers an excellent balance of flow out during application and excellent sag control for superior thin film... view more