The Universal Selection Source: Polymer Additives

Search Products

82 products match your search
Product Name
Supplier
Description
Brueggemann Chemical
BRUGGOLEN® P130 is an effective lubricant, processing auxiliary. Provides improved melt flow of the polymer melt, protection of the polymer against damage due to reduced friction, very low... view more
Applications
  • PA, Nylon
  • Injection molding - thermoplastics
  • Extrusion
  • Dry blending/ Grinding
Brueggemann Chemical
BRUGGOLEN® P30 is a mixture of lubricants, antioxidants and nucleating agents. Provide improved melt flow during processing, protection of the polymer against degradation caused by sheer stress... view more
Applications
  • PA, Nylon
  • Dry blending/ Grinding
  • Extrusion
  • Injection molding - thermoplastics
Brueggemann Chemical
BRUGGOLEN® P14 is a mixture of synthetic waxes and copolymers. Acts as an effective lubricant, processing auxiliary. Provides high efficiency due to excellent thermal stability and low volatility... view more
Applications
  • PA, Nylon
  • Dry blending/ Grinding
  • Extrusion
  • Injection molding - thermoplastics
Crodamide™ EBS is ethylene-bis-stearamide of non-vegetable origin. Acts as a slip and anti-block agent, mold release agent and lubricant for PVC. It is non-toxic and can be dispersed evenly through... view more
Applications
  • Other Thermoplastic>EVA
  • PA, Nylon
  • PE
  • PP
  • ...
Crodamide™ EBSV is ethylene-bis-stearamide of vegetable origin. Acts as a slip and anti-block agent, mold release agent and lubricant for PVC. It is non-toxic and can be dispersed evenly through the... view more
Applications
  • PP
  • PVC
  • PA, Nylon
  • PE
  • ...
IncroMold™ F acts as a release agent and lubricants. Improves cycle time and productivity in a variety of polymers. IncroMold™ F is suitable for use up to temperatures of 230°C. It can be... view more
Applications
  • TPE and TPV
  • PA, Nylon
  • Other Thermoplastic>EVA
  • Polymer Conversion>Lubrication/ slip
  • ...
IncroMold™ K acts as a release agent, antiscratch agent and lubricants. Improves cycle time and productivity in a variety of polymers. IncroMold™ K is suitable for use up to temperatures of 280°C... view more
Applications
  • Other Thermoplastic>EVA
  • PA, Nylon
  • TPE and TPV
  • Visual aspect & easthetics>Antiscratch
  • ...
IncroMold™ T acts as a release agent and lubricant. It can be dispersed evenly through the polymer in the melt phase. Migrates to the surface of the polymer where it forms a thin lubricating layer... view more
Applications
  • PA, Nylon
  • Cost reduction>Reduce cycle time
Voelpker
Montan Wax. WARADUR® E is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. Acts as a multi-purpose additive, e.g. release agent, flow improver, dispersing agent for... view more
Applications
  • PVC
  • PS (Polystyrene)
  • TPE and TPV
  • PBT
  • ...
WARADUR® GE is a glycerol ester wax of montanic acids (montan waxes). Acts as a multi-purpose additive, e.g. release agent, flow improver, dispersing agent for color masterbatches and filled... view more
Applications
  • Epoxy, Epoxide Resin
  • Other Thermoset>P (or PF)
  • PA, Nylon
  • PC
  • ...
WARADUR® OP is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols (montan waxes). It also contains calcium montanate. Acts as a multi-purpose additive, e.g. release... view more
Applications
  • Epoxy, Epoxide Resin
  • Other Thermoset>P (or PF)
  • PA, Nylon
  • PC
  • ...
Dyneon™ PTFE Micropowder TF 9205 by 3M is a fine, low molecular weight PTFE micro powder. Acts as a fluoropolymer-based lubricant. Exhibits an increased degree of abrasion resistance, chemical... view more
Applications
  • Other Rubber>Fluoroelastomers / Fluorinated Rubbers
  • Other Thermoplastic>Other Polyester
  • Other Thermoplastic>PI (Polyimide)
  • Other Thermoplastic>POM (Polyacetal)
  • ...
Perfluorocarbon resin. Used for mar resistance in polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides, polysulfones, fluoroelastomers, neoprenes, nitriles and silicones... view more
Applications
  • PA, Nylon
  • PC
  • Other Thermoplastic>Other Polyester
  • Other Rubber>CR, Chlorinated Rubber
  • ...
Perfluorocarbon resin. Used for mar resistance in polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides, polysulfones, fluoroelastomers, neoprenes, nitriles and silicones... view more
Applications
  • PA, Nylon
  • PC
  • Other Thermoplastic>Other Polyester
  • Other Rubber>CR, Chlorinated Rubber
  • ...
Perfluorocarbon resin. Used for mar resistance in polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides, polysulfones, fluoroelastomers, neoprenes, nitriles and silicones... view more
Applications
  • PA, Nylon
  • PC
  • Other Thermoplastic>Other Polyester
  • Other Rubber>CR, Chlorinated Rubber
  • ...
Perfluorocarbon resin. Used for mar resistance in polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides, polysulfones, fluoroelastomers, neoprenes, nitriles and silicones. Is... view more
Applications
  • PA, Nylon
  • PC
  • Other Thermoplastic>Other Polyester
  • Other Rubber>CR, Chlorinated Rubber
  • ...
Perfluorocarbon resin. Used for mar resistance in polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides, polysulfones, fluoroelastomers, neoprenes, nitriles and silicones... view more
Applications
  • PA, Nylon
  • PC
  • Other Thermoplastic>Other Polyester
  • Other Rubber>CR, Chlorinated Rubber
  • ...
Provide efficient internal and external lubricity. For polyamides, improves melt-flow, produces rapid mold release and exhibits rapid dispersion properties. Provides good lubrication and rapid... view more
Applications
  • PA, Nylon
  • PUR
  • PP
  • Compoundings
  • ...
Ashland Specialty Chemical
Polyoxyethylene stearate. Acts as dispersing agent for pigments, anti-fogging agent and polyamide fiber lubricant... view more
Applications
  • PA, Nylon
Also available as pellets. Excellent for nylons, styrenics and engineering resins processed at high temperatures. A good flow modifier with good heat stability. Increases melt flow index/reduces... view more
Applications
  • PA, Nylon
  • Other Thermoplastic
  • Extrusion
  • Injection molding - thermoplastics
Copolymeric polyethylene wax. Lubricant for processing engineering plastics such as nylon, high-impact polystyrene and ABS... view more
Applications
  • ABS
  • PA, Nylon
  • PS (Polystyrene)
Polyethylene wax based on a polar ethylene/vinylacetate copolymer. Dispersing auxiliary for plastics colouring. Powdered form is compatible with most thermoplastics and i used in to manufacture... view more
Applications
  • PUR
  • PS (Polystyrene)
  • PVC>PVC, flexible
  • PVC>PVC, rigid
  • ...
Baerlocher
Aluminum stearate. Acts as a lubricant. It is produced from a high quality, tallow derived fatty acid for grease, lacquer and polymer applications requiring a finely divided powder with good... view more
Applications
  • PA, Nylon
  • Other Thermoset
  • Engineering / manufacturing>Production machines
  • Buildings & constructions
  • ...
Aluminum stearate. It acts as a lubricant. Derived from vegetable in the form of distearate. Applications include thermosetting plastics and thermoplastics... view more
Applications
  • ABS
  • PA, Nylon
  • PS (Polystyrene)
Baerlocher
Used as an internal and external lubricant for rigid conversion modes. Reduce friction occuring between molecule chains of PVC. Used in hollow articles... view more
Applications
  • PA, Nylon
Baerlocher
Medium bulk density, high quality grade of lithium stearate. Acts as a medium density gellant, thickening agent, lubricant and processing aid with good handling and blending characteristics. Offers... view more
Applications
  • PVC>PVC, flexible
  • Other Thermoplastic
  • PA, Nylon
  • PVC>PVC, rigid
Zonyl® MP 1000 by Chemours is PTFE. Used as an additive in other materials or as a dry lubricant. It is a good electrical insulator, does not absorb water, and is highly resistant to weathering. It... view more
Applications
  • Other Rubber>QM, VQM, Silicone Rubber
  • Other Thermoplastic>Fluoropolymers
  • PA, Nylon
  • PC
  • ...
Zonyl® MP 1300 by Chemours is PTFE. Used as an additive in other materials or as a dry lubricant. It is a good electrical insulator, does not absorb water, and is highly resistant to weathering. It... view more
Applications
  • PC
  • PA, Nylon
  • Other Thermoplastic>POM (Polyacetal)
  • Polymer protection>Weatherability (UV, moisture, Oxygen...)
  • ...
Functionalized metallocene catalyst based polyethylene wax. Acts as a lubricant and dispersing aid for engineering plastics, especially for reinforced as well as unreinforced polyamide and... view more
Applications
  • Other Thermoplastic>PEEK, PEKK,PEK…
  • Other Thermoplastic>PSU (Polysufone)
  • Other Thermoplastic>PPS
  • Other Thermoplastic>PPE
  • ...
Calcium soap of montanic acids. Acts as lubricant for plastics especially engineering resins, nucleating agent for polyamides and acid scavenger for polyolefins as well as polyloxymethylene... view more
Applications
  • Other Thermoplastic>POM (Polyacetal)
  • Other Thermoplastic>Other Polyester
  • PE
  • PA, Nylon
  • ...
Ca-salt of montanic acids. Acts as a lubricant for plastics especially engineering resins, nucleating agent for polyamides and acid scavenger for polyolefins as well as polyoxymethylene. Possesses... view more
Applications
  • PC
  • ABS
  • PA, Nylon
  • PBT
  • ...
Partly saponified ester of montanic acids... view more
Applications
  • TPE and TPV>TPU (or TPE-U)
  • PVC>PVC, flexible
  • PVC>PVC, rigid
  • PA, Nylon
  • ...
Partly saponified, bright ester wax. Acts as a lubricant for plastics like engineering resins (PA 6 PA 6.6 PET TPU) PVC and their masterbatches for reinforced PP elastomers as well as thermosets... view more
Applications
  • PA, Nylon
  • Other Thermoplastic>Other Polyester
  • PVC>PVC, rigid
  • Other Thermoset
  • ...
Fluoropolymer based additive. Acts as a lubricant. Offers superior handling and dispersing performance. Used to improve wear resistance, non-stick properties and to reduce coefficient of friction... view more
Applications
  • PA, Nylon
  • PC
  • TPE and TPV
  • Other Thermoplastic>POM (Polyacetal)
  • ...
Fluoropolymer based additive. Acts as a lubricant. Offers superior handling and dispersing performance. Used to improve wear resistance, non-stick properties and to reduce coefficient of friction... view more
Applications
  • PA, Nylon
  • PC
  • TPE and TPV
  • Other Thermoplastic>POM (Polyacetal)
  • ...
Danisco (DuPont Group)
Mixture of polyglycerol esters made from edible, refined fatty acids and in which the glycerol moiety is mainly mono-, di-, tri- and tetraglycerol. Acts as an internal antistat, emulsifier, surface... view more
Applications
  • PA, Nylon
  • PE
  • PS (Polystyrene)
  • Packaging
  • ...
Domus Chemicals
Fatty acid ester. Acts as a lubricant and release agent. It is clear liquid in appearance (measured by MD 0 method). Exhibits good thermostability and low volatility even at high processing... view more
Applications
  • ABS
  • PA, Nylon
  • PC
  • PP
  • ...
Domus Chemicals
Fatty acid ester. Acts as a lubricant and release agent. It is present as white flakes (measured by MD 0 method). Exhibits good thermostability and low volatility even at high processing... view more
Applications
  • ABS
  • PA, Nylon
  • PC
  • PP
  • ...
Emery Oleochemicals
Molecular distilled high-mono glycerol monostearate. Acts as a lubricant and antistatic agent. Improves the rheology of the polymer melt by reducing friction and resistance to flow within the melt... view more
Applications
  • ABS
  • Other Thermoplastic>SAN
  • PA, Nylon
  • PET
  • ...
Emery Oleochemicals
Lubricant compound containing metallic soaps... view more
Applications
  • ABS
  • PA, Nylon
  • Other Thermoplastic
  • Injection molding - thermoplastics
Emery Oleochemicals
Solid saturated partial fatty acid ester of glycerol. Used as mould release agent for the injection moulding of PE, PP, PS, PA, POM, PET and PBT, antistatic agent for polyolefins and POM and... view more
Applications
  • PA, Nylon
  • PBT
  • PE
  • PS (Polystyrene)
  • ...
Fine Organics
Stearyl erucamide (Secondary fatty amide). Is a high temperature stable secondary amides capable of withstanding processing temperature of more than 260°C. Being of higher molecular weight, it... view more
Applications
  • PP
  • PE
  • PA, Nylon
  • Compoundings
Fine Organics
Refined vegetable based saturated primary amide (Stearamide). Acts as an antiblocking agent for polyolefins. Also acts as a lubricant in PVC, PS, synthetic rubbers, cellulose -acetate, amino resins... view more
Applications
  • PS (Polystyrene)
  • PVC>PVC, flexible
  • Other Rubber
  • PA, Nylon
  • ...
Fine Organics
Stearyl stearamide (Secondary fatty amide). Acts as lubricant and mold-release agent for engineering plastics such as polyamides, foam stabilizer in polyethylene (PE) foam as well as processing aid... view more
Applications
  • PA, Nylon
  • PE
  • PMMA
  • Other Thermoplastic>PSU (Polysufone)
Fine Organics
Acts as a processing aid and lubricant. Imrpoves flow properties and gives effective mold release. May be used as antiblock additive for biaxially oriented polyester films improving further abrasion... view more
Applications
  • PA, Nylon
  • PBT
  • PC
  • Other Thermoplastic>Other Polyester
  • ...
Georgia Gulf
Polyol fatty acid ester. Acts as external lubricant. Solulub 140 promotes improvement in mold release in the injection molding of polyamide, polycarbonate and thermoplastics polyesters. It improves... view more
Applications
  • ABS
  • PA, Nylon
  • PC
  • PVC>PVC, rigid
  • ...
N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. It is used to couple organic polymer with inorganic material. It can improve adhesion and water-resistance of mixed material. Also improve anti aging... view more
Applications
  • Other Rubber>QM, VQM, Silicone Rubber
  • PVC>PVC, flexible
  • TPE and TPV
  • Other Thermoset>P (or PF)
  • ...
Sintered high-molecular-weight PTFE. Possesses most heat-resistant. Does not generate pyrolysis gas at high temperatures... view more
Applications
  • Epoxy, Epoxide Resin
  • PA, Nylon
  • PC
  • Other Thermoplastic>Other Polyester
  • ...
Sintered high-molecular-weight PTFE. Possesses most heat-resistant. Does not generate pyrolysis gas at high temperatures... view more
Applications
  • PA, Nylon
  • Other Thermoplastic>Other Polyester
  • Other Thermoplastic>LCP (Liquid Crystal Polymer)
Sintered PTFE. Possesses high stability in mold strength and size. Generates small quantity of pyrolysis gas at high temperatures. Offers very good flow and dispersion characteristics. Exhibits... view more
Applications
  • Other Thermoplastic>PI (Polyimide)
  • Other Thermoplastic>PEI (Polyether Imide)
  • Other Thermoplastic>PSU (Polysufone)
  • Other Rubber>NBR
  • ...
Sintered PTFE. Possesses high stability in mold strength and size. Generates small quantity of pyrolysis gas at high temperatures. Offers very good flow and dispersion characteristics. Exhibits... view more
Applications
  • PA, Nylon
  • PC
  • Other Thermoplastic>PI (Polyimide)
  • Other Thermoplastic>PEI (Polyether Imide)
  • ...
Sintered PTFE. Possesses high stability in mold strength and size. Generates small quantity of pyrolysis gas at high temperatures. Offers very good flow and dispersion characteristics. Exhibits... view more
Applications
  • PA, Nylon
  • PC
  • Other Thermoplastic>LCP (Liquid Crystal Polymer)
  • Other Thermoplastic>PI (Polyimide)
  • ...
Liberty chemical
Fatty Bisamidewax. Acts as a lubricant, mold release agent, anti block and slip additive, as a dispersant for pigments and flame retardants. provide the ultimate performance in plastics processing... view more
Applications
  • ABS
  • PA, Nylon
  • PE
  • PP
  • ...
Polydimethyl siloxane based masterbatch containing 50% of siloxane content in polyamide 6 carrier resin. Improves lubricity and scratch-, mar-, & abrasion resistance with no fogging. Possesses... view more
Applications
  • PA, Nylon
  • Households products/ Consumer Goods>Sports & Leisures>Fishing rods
  • Gears
  • Visual aspect & easthetics>Antifogging
Mittal Pigments (Mittal Group)
Aluminum stearate. Acts as a lubricant. It is a creamy white powder that is soluble in oils and insoluble in water & alcohol. Used in the production of polyamides and thermosetting plastics. It has... view more
Applications
  • PA, Nylon
  • Polymer Conversion>Lubrication/ slip
PCC (Chemax group)
Chemical composition : GMS 42% min. Internal application... view more
Applications
  • ABS
  • PA, Nylon
  • PE
  • PS (Polystyrene)
  • ...
PCC (Chemax group)
Chemical composition : GMS 52% min. Internal applications... view more
Applications
  • ABS
  • PA, Nylon
  • PE
  • PS (Polystyrene)
  • ...
PCC (Chemax group)
Chemical composition : GMS 95% min. Internal application... view more
Applications
  • ABS
  • PA, Nylon
  • PE
  • PS (Polystyrene)
  • ...
PCC (Chemax group)
Chemical composition : GMS 95% min. External applications... view more
Applications
  • ABS
  • PA, Nylon
  • PE
  • PS (Polystyrene)
  • ...
PCC (Chemax group)
External applications... view more
Applications
  • ABS
  • PA, Nylon
  • PE
  • PUR
  • ...
Monoaluminum stearate. Acts as a lubricant, water repellent agent, hydro-phobic agent and defoaming agent. It is soluble in oils and insoluble in water as well as alcohol. Used in the production of... view more
Applications
  • Other Thermoset
  • PA, Nylon
Polyvel
Molybdenum disulfide masterbatch. Is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made... view more
Applications
  • PA, Nylon
  • Extrusion>Profiles
  • Injection molding - thermoplastics
Polyvel
Molybdenum disulfide masterbatch. Is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made... view more
Applications
  • PA, Nylon
  • Extrusion>Profiles
  • Injection molding - thermoplastics
Polyvel
Molybdenum disulfide masterbatch. Is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made... view more
Applications
  • PA, Nylon
  • Extrusion>Profiles
  • Injection molding - thermoplastics
Aluminum salt of stearic acid. It acts as a lubricant in polyamides and in thermosetting of plastics. It is a white colored powder and dissolves well in vegetable oils on heating and if high... view more
Applications
  • Other Thermoset
  • PA, Nylon
  • Injection molding- thermosets
Cetyl palmitate. Used as an external lubricant for PVC. Can also be used as mold release agent for engineering plastics, especially ABS... view more
Applications
  • ABS
  • PA, Nylon
  • PBT
  • PC
  • ...
Starbetter Chemical Materials
High molecular weight poly siloxane based additive. Act as a lubricant. Can also act as processing aid and surface modifier of thermoplastics. Improves flame retardance property, flow ability... view more
Applications
  • PBT
  • ABS
  • Other Thermoplastic>PPE
  • PC
  • ...
Starbetter Chemical Materials
Siloxane based additive masterbatch containing 50% of the effective substance in polyolefin resin. Acts as a lubricant. Also used as processing aid and surface modifier for thermoplastics. Offers... view more
Applications
  • PP
  • PE>HDPE
  • PE>LDPE
  • PBT
  • ...
Proprietary blend. Acts as a lubricant and processing aid. It is available in form of beige to off-white pastille. It provides improved mixing & reduces die build-up & die-drool of filled & unfilled... view more
Applications
  • PA, Nylon
  • Injection molding - thermoplastics
  • Polymer Conversion>Dispersion
  • Polymer Conversion>Flow improvement
  • ...
Proprietary blend. Acts as a compatiblizer, lubricant and processing aid. It is available in form of light yellow pastille or powder. It provides improved mixing & reduced die build up & die-drool... view more
Applications
  • PA, Nylon
  • Injection molding - thermoplastics
  • Polymer Conversion>Die build up reduction
  • Polymer Conversion>Flow improvement
  • ...
Proprietary blend. Acts as a compatiblizer, lubricant and processing aid. It is available in form of yellow pastille or powder. It provides improved mixing & reduced die build up & die-drool of... view more
Applications
  • ABS
  • PA, Nylon
  • PC
  • Injection molding - thermoplastics
  • ...
Vertellus Specialties
A building block for modifying many performance properties of a broad range of industrial chemicals. Used in synthetic lubricants, urethane intermediates, epoxy resins, polyamide and polyester... view more
Applications
  • Epoxy, Epoxide Resin
  • PA, Nylon
  • PUR
  • UPR
Dispersion at very high concentration of fluoride polymer (50%) in polyamide, free from fillers. Acts as a slip and lubricating agent for polyamide technical injection molding applications... view more
Applications
  • PA, Nylon
  • Injection molding - thermoplastics
Westlake Chemical
Branched low density polyethylene modified with maleic anhydride. Used in packaging. Offers very good thermal stability. Exhibits high gloss and low moisture vapor transmission rates. Offers very... view more
Applications
  • PA, Nylon
  • PE
Westlake Chemical
Branched low density polyethylene powder modified with maleic anhydride. Used in packaging. Offers very good thermal stability. Exhibits high gloss and low moisture vapor transmission rates... view more
Applications
  • PA, Nylon
  • PE
  • Packaging
Westlake Chemical
Branched low density polyethylene modified with maleic anhydride. Used in packaging. Offers very good thermal stability... view more
Applications
  • PA, Nylon
  • PE
  • Packaging
Westlake Chemical
Branched low density polyethylene powder modified with maleic anhydride. Used in packaging. Offers very good thermal stability... view more
Applications
  • PA, Nylon
  • PE
  • Packaging
Westlake Chemical
Branched low density polyethylene modified with maleic anhydride. Used in packaging. Offers very good thermal stability... view more
Applications
  • PA, Nylon
  • PE
  • Packaging
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement
Croda

Tutorial

High Temperature Plastics: How to Well Control Melt Temperature

Well measure & adjust the melt temperature of your high temperature plastics (PA, PPA, PPS...)

Sitecore.Data.Items.Item

Channel Alerts

Receive weekly digests on hot topics

Receive your alerts

Back to Top