The Universal Selection Source: Polymer Additives

by SpecialChem
8 products match your search
Product Name
Supplier
Description
Luperox® 231XL40 by Arkema is a 1,1-Di(t-butylperoxy)-3,3,5 - trimethylcyclohexane crosslinking peroxide. Acts as a polymerization initiator, and crosslinking & vulcanizing agent. It is a 40% active... view more
Applications
  • TPE and TPV
  • Wiring & Cables
  • Electrical markets
  • Sealants, seals & gaskets
  • ...
Luperox® DCP by Arkema is a dicumyl peroxide (DCP). Acts as a polymerization initiator, vulcanizing and crosslinking agent. Compatible with thermoplastic elastomer vulcanizates, polypropylene and... view more
Applications
  • TPE and TPV
  • PS (Polystyrene)>EPS
  • PP
  • Wiring & Cables
  • ...
Vulcanizing agent and adhesion promoter. Imparts mercapto organofunctionality. Used for mineral-filled (silica, etc.) or carbon black pigmented sulfur cured elastomers at 1.0-2.0 phr to improve... view more
Applications
  • Other Rubber
  • TPE and TPV
  • Vulcanization
  • Compoundings
  • ...
Medium to high temperature organic peroxide. Used as a vulcanizing agent for elastomers, a crosslinking agent for polyolefins, a polymerizing initiator for polyesters and a flame retardant for... view more
Applications
  • PS (Polystyrene)
  • Other Rubber
  • TPE and TPV
  • UPR
  • ...
Bis(3-triethoxysilylpropyl)tetrasulfane. Used as vulcanizing agent. Improves tensile strength, modulus and abrasion... view more
Applications
  • Other Rubber
  • TPE and TPV
  • Vulcanization
Bis(3-triethoxysilylpropyl)tetrasulfane. Used as vulcanizing agent. Improves tensile strength, modulus and abrasion... view more
Applications
  • Other Rubber
  • TPE and TPV
  • Vulcanization
R. T. Vanderbilt
Vulcanizing agent for SBR, NBR, EPM, CPE, EPDM, and silicone. Very effective at low curing temperatures. Cross-linking agent for PE and EVA... view more
Applications
  • Other Thermoplastic>EVA
  • PE
  • Other Rubber>EPDM
  • Other Rubber>EPM (or EVM)
  • ...
R. T. Vanderbilt
Vulcanizing agent for SBR, NBR, EPM, CPE, EPDM, and silicone. Very effective at low curing temperatures. Cross-linking agent for PE and EVA... view more
Applications
  • Other Thermoplastic>EVA
  • PE
  • Other Rubber>EPDM
  • Other Rubber>EPM (or EVM)
  • ...
Report Missing Product/Supplier Report Error in Datasheet Suggest Improvement

Online Course

Jeffrey A. Jansen
22 Days left to register

Wednesday Oct 19 2016

By Jeffrey A. Jansen

25% of plastic part failures are caused by Environmental stress cracking (ESC) making it THE leading cause of failure in plastics components. And as there is never only one cause but a combination of many factors behind ESC, Jeff shows you how to better predict & solve its occurrence.

28 Read More
Back to Top