Kicker for PVC foam prodcts. Good lubricity and non-blooming... view more

It is a high ratio sol foaming. It contains cell controller... view more

It is a high foaming ratio wall paper. It enables good heat stability... view more

view more

KBZ 2610B by Kolon Industries is barium zinc heat stabilizer. Offers good heat stability. It is suitable for conversion by calendering. KBZ 2610B finds application in formulating films, sheets and... view more

KVIS-20 by Kothari Petrochemicals is an external & internal lubricant and an excellent dispersant. It is a non-toxic, chemically inert, viscoelastic polyisobutylene (PIB) grade with the ability to increase... view more

ACF(N) by Kumyang acts as a chemical blowing agent. It exhibits whiteness, low temperature & processing properties. It is compatible with flexible PVC and suitable for casting processing... view more

CAP/264H by Kumyang acts as a blowing agent. It offers reduced cost and possesses light weight & insulation. It has small & uniform cell structure with a smooth surface (no pin holes) and can... view more

CAP/264U by Kumyang acts as a blowing agent. It offers reduced cost and possesses light weight & insulation. It has small & uniform cell structure with a smooth surface (no pin holes) and can... view more

CAP/463J by Kumyang acts as a blowing agent. It is compatible with polyvinylchloride (PVC) and suitable for injection processing method. It offers reduced cost and possesses light weight &... view more

CAP/563W by Kumyang acts as a blowing agent. It offers reduced cost and possesses light weight & insulation. It has small & uniform cell structure with a smooth surface (no pin holes) and can... view more

Kureha BT by Kureha is a MBS (methacrylate butadiene styrene) grade. Acts as an impact modifier. Kureha BT by Kureha is suitable for PVC (polyvinyl chloride) compounds... view more

Addolink®TT is dimeric toluene-2.4-diisocyanate. Acts as a bonding agent to improve the adhesion of fabrics (polyester, polyamide, aramide) to plasticized PVC or rubber. Recommeneded dosage is... view more

Adimoll® BO is benzyl octyl adipate. Acts as a plasticizer. It is characterized by low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial... view more

Adimoll® DB is di-n-butyl adipate. Acts as a plasticizer. It is characterized by good compatibility with cellulose derivates. It is used as low-temperature-resistant plasticizer for melt processable... view more

Adimoll® DO is di-2-ethylhexyl adipate. Acts as a plasticizer. Exhibits low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial viscosity and... view more

Baymod® PU-A is aliphatic polyester urethane. Acts as a plasticizer. When mixed with PVC, it is oil, grease and solvent resistant, non-volatile, resistant to- abrasion and tear propagation... view more

Hisorb 327 by LG Chem is a 2-(3-5-ditertbutyl-2-hydroxphenyl)-5-chlorobenzotriazole. Acts as an UV absorber. Prevents the yellowing and degradation of polymers... view more

Hisorb 328 by LG Chem is a 2-(3,5-di-tert-pentyl-2-hyroxyphenyl) benzotriazole. Acts as an UV absorber. Prevents the yellowing and degradation of polymers... view more

Hisorb P by LG Chem is a 2-(2-hydroxy-5-methylphenyl) benzotriazole. Acts as a light stabilizer... view more

Hexanoic acid, 2-ethyl-, mixed triesters with benzoic acid and trimethylolpropane. It acts as an environment-friendly (non-endocrinic disrupter) plasticizer for PVC soft sheet and injection, with an... view more

Diisononyl phthalate. It acts as a plasticizer and shows good viscosity stability as well as an electric insulation. It appears as a colorless to pale yellow, oily liquid having molecular weight of... view more

UltraCarb™ 1250 by LKAB Minerals is a mixture of hydromagnesite and huntite. It is natural, halogen-free mineral flame retardant filler. Modern milling and classification processes combined with... view more

Mixture of hydromagnesite and huntite. It is natural halogen-free mineral fire retardant filler. It is surface treated with stearic acid. Modern milling and classification processes combined with... view more

UltraCarb™ 1253 by LKAB is a mixture of hydromagnesite and huntite. It is finely milled natural halogen-free mineral fire retardant filler. Modern milling and classification processes combined with... view more

UltraCarb™ 1290 by LKAB is a is a white, highly disperse inorganic product consisting of 2 minerals: huntite (plate calcium carbonate) and hydromagnesite (hydrated magnesium carbonate). It is finely... view more

Mixture of hydromagnesite and huntite. It is finely milled natural halogen-free mineral fire retardant filler. It is surface treated with stearic acid. Modern milling and classification processes... view more

Liquid a-toxic Ca/Zn stabilizer. Phthalate free. Has good initial color and transparency. Used for the production of clinging films for food packing by blown extrusion and for the extrusion of... view more

Liquid Ca/Zn stabilizer formulated without pTBBA and 2 EEA derivatives and does not contain nonyl-phenol (free or bonded). Used in flexible and semirigid compounds intended for calendaring and... view more

Lastab V 506 by Lamberti is a stabilizer for PVC-S and PVC-ABS compounds. Offers very good long-term stability. Is free from plate out and provides very good processing heat stability. Prevents the... view more

Lubex 40 by Lamberti is a viscosity depressant agent with dispersion action. Has a high flash point, very low volatility, very good efficiency and a very low volatility. Does not adverse the heat... view more

Viscosity depressant agent. Has a dispersing action, good compatibility and a good control of the viscosity during the ageing of the plastisol. Does not adverse the transparency, but it can reduce... view more

Speedblock UV-P by Lambson (Sartomer) is 2-(2H-benzotriazol-2-yl)-p-cresol. Acts as a ultraviolet light absorber. can be used alone or with other additives such as hindered light stabilisers and... view more

Carrier : calcium silicate. Compared with pure silane this dry liquid liquid improves handling and dosage, gives a better dispersion and optimum distribution of the active ingredient inside the... view more

LUVOBATCH® EA BA 5350 by Lehmann & Voss is an endothermal blowing agent. It offers avoidance of post-inflation, safe dosage, short cycle times, decorative effects and good dispersion. It is a dust-free, low-cost... view more

LUVOBATCH® EV BA 5332 by Lehmann & Voss is an exothermic blowing agent. It is a dust-free, low-cost masterbatch in microgranulate form. It exhibits controlled foaming process, good dispersion, improved heat "> It... view more

LUVOBATCH® EV BA 5335 by Lehmann & Voss is an exothermic blowing agent. It is a dust-free, low-cost masterbatch microgranulate form. It exhibits controlled foaming process, good dispersion, improved heat "> It... view more

LUVOBATCH® EV BA 5391-01 by Lehmann & Voss is a dust-free, low-cost exothermic blowing agent. It exhibits controlled foaming process, good dispersion, improved heat "> It offers decorative effects, prevention of sink... view more

It acts as a plasticizer of PVC, working with DOP and BOP (30% to 50% of weight of mixture). It improves the anti-aging property, mechanical strength and serviceability of products. It offers good... view more

It acts as a plasticizer of PVC, working with DOP and BOP (30% to 50% of weight of mixture). It improves the anti-aging property, mechanical strength and serviceability of products. It offers good... view more

It acts as a plasticizer of PVC, working with DOP and BOP (30% to 50% of weight of mixture). It improves the anti-aging property, mechanical strength and serviceability of products. It offers good... view more

It acts as a plasticizer of PVC, working with DOP and BOP (30% to 50% of weight of mixture). It improves the anti-aging property, mechanical strength and serviceability of products. It offers good... view more

It acts as a plasticizer of PVC, working with DOP and BOP (30% to 50% of weight of mixture). It improves the anti-aging property, mechanical strength and serviceability of products. It offers good... view more

Fatty acid ester. Acts as an efficient combination, highly compatible lubricant for unplasticized or partially plasticized PVC processing. Available as a creamish powder. Shows very good... view more

Complex Ester. Acts as a processing aid. Possesses sites for hydrogen bonding and therefore able to act as a coupling agent to provide a chemical link between filler surface and polymer matrix... view more

Libnol -40 by Liberty chemical acts as an effective viscosity depressant for PVC plastisol. Used in the manufacturing PVC leather cloth by spread coating technique. Stiffness of leather cloth improves as... view more

One pack lubricant system. Acts as a composite lubricant designed for use in extrusion or injection molding of rigid PVC applications include siding, profiles and molded parts. Imparts smoothness... view more

Oleochemical derivative. Acts as an internal lubricant. Offers very good compatibility. Provides improved free-flowing properties and marked improvement in the surface condition (high degree of... view more

Heat-resistant lubricant. Mainly used in styrene, vinyl chloride, polyester resins, nylon. Bead properties... view more

Heat-resistant lubricant. Mainly used in styrene, vinyl chloride, polyester resins, nylon... view more

Heat-resistant lubricant. Mainly used in styrene, vinyl chloride, polyester resins, nylon... view more

Emulsifier for emulsion polymerization used in synthetic rubbers, vinyl chloride and vinyl chloride/acryl. Sequestering agent. Latex emulsifying assist agent... view more

Emulsifier for emulsion polymerization used in synthetic rubbers, vinyl chloride and vinyl chloride/acryl. Sequestering agent. Latex emulsifying assist agent... view more

Solplus™ DP710 by Lubrizol is a 100% active polymeric dispersant. Improves filler and pigment dispersion. Provides increased extruder throughput, maintained or improved physical properties... view more

Solplus™ DP720 by Lubrizol is a 100% active polymeric dispersant. Improves filler and pigment dispersion. Provides increased extruder throughput, maintained or improved physical properties... view more

GUARD DOG™ UV531 by M Chemical acts as a UV light stabilizer. It has exceptionally strong and broad-range of UV absorption properties (UVA 315 – 400 nm and UVB 290 – 314 nm) throughout the UV spectrum. It... view more

GUARD DOG™ UV9 by M Chemical is 2-hydroxy-4-methoxybenzophenone based UV light stabilizer. It has exceptionally strong and broad-range of UV absorption properties (UVA 315-400 nm and UVB 290-314 nm)... view more

Alkane sulfonate. Acts as an antistatic agent. It shows fast migration and reduces surface resistance. It exhibits thermal resistance and improves slip properties. It is mainly used in injection... view more

Antioxidant 1010 (MFCI) by MFCI is an odorless, sterically hindered phenolic antioxidant. It exhibits highly effective, non-discoloring stabilizer for organic materials. It shows good compatibility, low... view more

Plastic Additive UV-120 by MFCI is a light stabilizer. It is a white color crystalline powder. It acts as an auxiliary agent for plastics. Plastic Additive UV-120 is a highly efficient UV-absorber for PVC, PE, PP and... view more

Plastic Additive UV-P by MFCI is a UV absorber for polyester, epoxy, cellulose acetate, PVC, polystyrene, plexiglass and polyacrylonitrile resin. Recommended dosage level of Plastic Additive UV-P for unsaturated... view more

UV-1577 by MFCI is a light stabilizer. It is available in slightly yellow color powder. UV-1577 finds application in acrylate, PVC, polyester and polyethylene high capability polymer... view more

UV-3035 by MFCI is a light stabilizer. It is a white color crystalline powder. It is suitable for the stabilization of PVC, PA and ABS. UV-3035 is used in PS, polyesters and PUR... view more

AO-1330 by MPI Chemie is a sterically hindered primary phenolic antioxidant for processing and long-term thermal stabilization. It inhibits the formation of free radicals thereby enhancing the... view more

AO-3114 by MPI Chemie is an effective, non-discoloring, sterically hindered phenolic primary antioxidant for processing and long-term thermal stabilization. It protects substrates against... view more

Bright FP-127 by MPI Chemie is a fluorescent whitening agent. It is designed to brighten colors or mask yellowing in plastics and fibers. It absorbs invisible ultraviolet radiation and re-emits it... view more

HPMC by MPI Chemie is cellulose ether-based primary & secondary suspending agent. It is used for suspension polymerization of vinyl chloride. HPMC is used in PVC polymerization for the... view more

LS-2020 by MPI Chemie is a high molecular weight, block oligomeric hindered amine light stabilizer. It shows excellent polymer compatibility and high extraction resistance. This additive possesses... view more