OK
The Universal Selection Source:
Polymer Additives
Daikin fluoro based polymers processing aids are additives used to increase productivity and quality of PE materials during extrusion. These additives have the advantage to not compromise on PE performance as only few hundred ppm are needed.

Reduce your production cost with Fluoropolymers-based PPA

Third generation of PPAs based on unique functionalized fluoro-elastomer chemistry has been specifically designed to reduce the overall system cost of all your polyolefin conversion, even LLDPE lamination.

This cost-efficiency can be achieved either by providing more flexibility to the polyolefin resin selected or through productivity improvements. Then, high quality of the PE pellets as well as high quality of the film produced are maintained through:

  • Using linear PE resins that are cheaper
  • Reducing PE resins amount by producing thinner wall films while maintaining equal or better performance
  • Reducing preventive cleaning maintenance shutdowns
  • Increasing the production output

Discover the dosage level needed of each Daikin's PPAs to get to the performance you require

PPA grades Melt Fracture
reduction
Concentration
needed
Mooney
Viscosity
Drop Size Die Build Up
reduction
Risk of Gels
1st PPA Generation:
DAIKIN PPA DA-810X
DAIKIN PPA DA-310ST
+ < 500 ppm 30 - 45 + + Low
2nd PPA Generation:
Competitor
+ < 300 ppm 65 - 80 - - High
New PPA Generation:
DAIKIN PPA DA-910
+ < 300 ppm 30 - 45 + + Low
Table 1: Comparison of the main performance and output of Daikin's PPAs

Request a sample of DAIKIN PPA DA-910

Interested in Daikin's PPA?

Ask for a sample!

Contact our expert in PPA!

How PPA can be used in your application?

Contact our expert!

1

Case Studies from Fluoropolymers as Polymer Processing Aid (PPA)

Reduce PPA dosage and interactions with HALS in PE agricultural films

Polymer Processing Aids (PPA) - Fluoropolymers based additives help to reduce melt fracture, reduce die build-up and extend the time between cleanings, decrease PPA dosage with similar performance.

Download

6

Downloads from Fluoropolymers as Polymer Processing Aid (PPA)

3
1

Webinars & Videos

Check out our webinars and videos about Fluoropolymers as Polymer Processing Aid (PPA)

Back to Top