OK
The Universal Selection Source:
Polymer Additives

Orevac® 18341

Technical DataSheet | Supplied by Arkema

Maleic anhydride modified linear low-density polyethylene. Acts as a coupling agent for the production of halogen-free flame retardant (HFFR) compounds. It is designed to develop a reliable bonding strength between polyethylene or ethylene copolymers and mineral fillers. It helps to achieve superior mechanical properties and better water aging resistance. The high content of grafted MAH makes it an excellent coupling agent between polyolefin and mineral fillers such as aluminium trihydrate (ATH), magnesium dihydrate (MDH), brucite, etc. It is compatible with evatane, LLDPE and ATH. Used to develop a reliable bonding strength onto FBE (fusion bonded epoxy) steel pipe protective layer. It is also used in jacketing of low voltage cables and for the production of cable compounds with most common types of equipment (internal mixer, co-kneader, twin screw extruder).

Orevac® 18341 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Chemical Composition
xxxxxxxxxxxxxxxxxxxxxxxxx
Physical Form
Pellets
Product Launch Date
xxxxxxxxxxxx
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • xxx
  • xxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx

Orevac® 18341 Properties

Property

Value & Unit
Test Condition
Test Method
Tensile strength, before water resistance test
xx MPa
Elongation @ break, before water resistance test
xxx %
Melt flow index, (150°C -21.6kg)
xxxxx g/10 min
Limiting oxygen index
xx %
Melt Index (190°C / 2.16 kg), ISO 1133 / ASTM D1238
xxx g/10min
Melting point, ISO 11357-3
xxx °C
Vicat softening temperature (10N), On compression molded sample, ISO 306 / ASTM D1525
xx °C
Tensile modulus, On compression molded sample, ISO 527 - 1A / ASTM D638
xxx MPa
Elongation at break, On compression molded sample, ISO 527 - 1A / ASTM D638
xxxxx %
Tensile strength at break, On compression molded sample, ISO 527 - 1A / ASTM D638
xxxx MPa
Hardness Shore D (1s), On compression molded sample, ISO 868 / ASTM D2240
xx
Density, ISO 1183 / ASTM D1505
xxxxx g/cm3
Last edited Oct 25, 2017
Back to Top