OK
The Universal Selection Source:
Polymer Additives

Orevac® IM300

Technical DataSheet | Supplied by Arkema

Orevac® IM300 by Arkema is a maleic anhydride modified linear low-density polyethylene available in the form of pellets. Acts as an impact modifier. Offers softness, reactivity and excellent processability. Orevac® IM300 is compatible with large range of engineering polymers such as polyamides (PA6, PA66, PA12 etc). Can be processed using injection molding and compounding. Shelf life is two years from the date of delivery.

Orevac® IM300 Product details

Product Type
xxxxxxxxxxxxxxxxxxxxxxxxx
Chemical Composition
xxxxxxxxxxxxxxxxxxxxxxxxx
Physical Form
Pellets
Product Status
xxxxxxxxxx
Applications/ Recommended for
  • xxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Bio Based
xx

Orevac® IM300 Properties

Property

Value & Unit
Test Condition
Test Method
Melt Index (190°C / 2.16 kg), ISO 1133
xxx g/10min
Melting point, ISO 11357-3
xxx °C
Density, ISO 1183
xxxx g/cm3
Tensile elongation (at Break, on compression molded samples), ISO 527
xxxxx MPa
Tensile strength (at Break, on compression molded samples), ISO 527
xxx MPa
Shore Hardness (Shore D, 1 s, on compression molded samples), ISO 868
xx
Shore Hardness (Shore D, 15 s, on compression molded samples), ISO 868
xx
Shore Hardness (Shore A, 15 s, on compression molded samples), ISO 868
xx
Shore Hardness (Shore A, 1 s, on compression molded samples), ISO 868
xx
Flexural modulus (on compression molded samples), ISO 178
xxxx MPa
Vicat softening temperature (10N, on compression molded samples), ISO 306
xx °C
Last edited Oct 25, 2017
Back to Top