OK
The Universal Selection Source:
Polymer Additives

KRATON™ G1702

Technical DataSheet | Supplied by KRATON

KRATON™ G1702 by Kraton Polymers is a styrene-ethylene-propylene (SEP) polymer with a di-block structure. Acts as a thickening agent, thixotropic agent and viscosity modifier. It thickens mineral oils, while providing shear thinning behavior. Moreover, it improves film formation, provides elasticity and creates excellent moisture barrier. It performs very well at low temperatures and possesses excellent oil retention. It offers high level of formulation versatility, high clarity, enhanced product stability and broad range of rheological profiles. It shows excellent compatibility with variety of oils and can be directly dissolved in heated oil. KRATON™ G1702 finds application in cable-filling compounds, injection molded, or extruded “foamed“ oil gels. It can also be used to create low density foams when blended with oils and thermoplastic expandable microspheres. These foams can be thermoplastic or thermoset. Thermoset UV cured foams are more resistant to higher temperatures. Complies with FDA and listed on AICS, Canadian DSL, IECSC, EINECS, Japanese ENCS, KECI, NZIoC, PICCS, NECI and TSCA.

KRATON™ G1702 Product details

Product Type
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Chemical Composition
xxxxxxxxxxxxxxxxxxxxxxxxx
CAS Number
66070-58-4
Physical Form
Powder
Product Status
xxxxxxxxxx
Geographical Availability
xxxxxxxxxxxxxxxxxxxxxxxxx
Applications/ Recommended for
  • xxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Food contact approval
xxx
Labels/Agency Rating
xxxxxxxxxxxxxxxxxxxxxxxxx

KRATON™ G1702 Properties

Property

Value & Unit
Test Condition
Test Method
Tensile strength, ASTM D412, separation speed 10in./min
x MPa
Elongation at break, ASTM D412, separation speed 10in./min
xxxxx %
Hardness, shore A (10 sec), compression molded at 177°C
xx
Specific gravity
xxxx
Brookfield viscosity, 25% w in toluene, 25°C
xxxxx cps
Melt index, 5kg, 200°C & 230°C
xxx g/10 min
Styrene/Rubber ratio
xxxxx
Diblock content
xxx %
Brookfield viscosity, 10% w in toluene, 25°C
xxx cps
Relative density at 20°C
xxxxxxxxxx

Solubility Properties

Element
Test Condition
Test Method
Soluble in
xxxxxxxx
Insoluble in
xxxxx
Last edited Feb 1, 2018
Back to Top