OK
The Universal Selection Source:
Polymer Additives

Addovate® WM

Technical DataSheet | Supplied by Lanxess

Addovate®WM is a non-ionogenic emulsifier. Acts as a dispersant and emulsifier for the production of polyester based flexible slabstock foam. In general 1.0 - 2.0 p.b.w. of it should be added to 100 p.b.w. polyester polyol. Over-dosage (> 4.0 p.b.w.) will result in a deterioration of the compression hardness. Under-dosage of leads to a badly homogenized catalyst mixture which results in severe damages to the cell structure. It has a shelf life of 12 months.

Addovate® WM Product details

Product Type
  • xxxxxxxxxxxxxxxxx
  • xxxxxxxxxxxxxxxxxxxxxxxxx
Chemical Composition
xxxxxxxxxxxxxxxxxxxxxxxx
Masterbatch
xx
Physical Form
Liquid
Appearance
Yellowish-brown to brown
Product Status
xxxxxxxxxx
Bio Based
xx

Addovate® WM Properties

Property

Value & Unit
Test Condition
Test Method
Density @ 20°C
xxxx g/cm3
Viscosity @ 25°C
xxx mPa.s
Freezing point
x °C
Flash point (DIN ISO 2592)
xxx °C
Hydroxyl value
xxxxxxx mg KOH/g
Acid value
xxxxx mgKOH/g
Initial boiling point
xxx °C
Last edited Dec 18, 2017
Back to Top