T-403 by IRO Coating Additive is an active chain extender. It exhibits good toughening effect in epoxy resin industry and surface corrosion resistance performance in the epoxy-polyurethane system... view more

T-5000 by IRO Coating Additive is polyetheramine which is an active chain extender. It is triamine prepared by reaction of epoxypropane with a triol initiator, followed by amination of the terminal... view more

Masteret™ 70450 is a red phosphorus-based flame retardant. It is prepared by dispersing 50% red phosphorus in bisphenol A epoxy resin. It is halogen-free and mainly used where molded final... view more

Melagard™ MC by Italmatch Chemicals is a melamine-based flame retardant. It is non-toxic, environmentally friendly and exhibits low corrosivity, high compatibility with many resins and good... view more

Phoslite™ B85AX by Italmatch Chemicals is a halogen-free flame retardant synergistic preparation system based on inorganic phosphinate. It is an easy to disperse & to color, non-blooming, non-corrosive and... view more

High molecular weight, ester-based plasticizer. Offers low temperature flexibility. Imparts very good softening action and producing low durometer stocks. Exhibits good permanence & resistance to... view more

Plasticizer. Exhibits higher viscosity reduction, good wetting and dispersion of the extenders and pigments. Possesses improved flow during application. Offers reduced hardness and exotherm... view more

Surfant EPH by Jiahua Chemicals is an excellent high boiling organic solvent. This grade is ethylene glycol phenyl ether. Surfant EPH is suitable for acrylic, nitrocellulose, cellulose acetate... view more

Antiflame™ MC by Jiangmen Topchem Technology is a halogen-free melamine cyanurate. Acts as a flame retardant. It shows good retention of tensile strength properties and significant increase of tensile modulus. It has... view more

Antiflame™ NP-100 by Jiangmen Topchem Technology is a non-halogenated based on phosphorus/nitrogen synergism. Acts as a flame retardant. It is white, free-flowing powder. It has high nitrogen content, limited water... view more

Self-extinguishing reactive polyether monomer. Consists chlorine, phosphorous and reactive hydroxyls can take part in the polymerization as well as condensation reaction of high molecule and become... view more

FRT-6 by Jiangsu Yoke Technology is a plasticized flame retardant consisting chlorine, bromine and phosphorous with large molecule weight and great steric hindrance. Has no volatility, very good... view more

Triphenyl phosphate. Acts as a flame retardant in many plastics and resins (such as phenolic resin, cellulose resin, epoxy resin, PVC, PP, PC, ABS and PC/ABS). Can be used as non-flammable... view more

E-R2 by Jiangxi Hongbai New Materials is a multifunctional chloroalkyl silane coupling agent. It improves the physical and mechanical properties of rubber. It can also significantly improve the adhesive... view more

Ammonium polyphosphate I by Jingjiang Concord Plastics Technology acts as a flame retardant. It appears as a white powder and is applied in epoxy resin or unsaturated polyester. It is used in the treatment of fireboard... view more

Ammonium polyphosphate II by Jingjiang Concord Plastics Technology acts as a flame retardant. It appears as a white powder and is applied in epoxy resin or unsaturated polyester. Ammonium polyphosphate II is used in the treatment of fireboard... view more

Ammonium polyphosphate III by Jingjiang Concord Plastics Technology acts as a flame retardant. It appears as a white powder and is applied in epoxy resin or unsaturated polyester. Ammonium polyphosphate III is used in the treatment of fireboard... view more

Ammonium polyphosphate IV by Jingjiang Concord Plastics Technology acts as a flame retardant. It appears as a white powder and is applied in epoxy resin or unsaturated polyester. Ammonium polyphosphate IV is used in the treatment of fireboard... view more

DMMP Flame Retardant by Jingjiang Concord Plastics Technology is dimethyl methyl phosphonate (DMMP) acts as a flame retardant. It has self-off, low temperature, plasticity and stable UV with... view more

MultiStar® 566 2400 25 by Johns Manville is an E-glass fiber roving. It is manufactured with continuous glass fibers of defined diameter into a cylindrical roving package with a sizing suitable for... view more

MultiStar® 566 2400 35 by Johns Manville is an E-glass fiber roving. It is manufactured with continuous glass fibers of defined diameter into a cylindrical roving package with a sizing suitable for chopping and... view more

StarRov® 090 AS 113 by Johns Manville is E-glass fiber coated with silane based sizing. It is manufactured by direct winding of continuous glass fibers of defined diameter into a cylindrical roving package. It is... view more

StarRov® 090 AS 207 by Johns Manville is E-glass fiber coated with silane based sizing. It is manufactured by direct winding of continuous glass fibers of defined diameter into a cylindrical roving... view more

StarRov® 090 AS 218 by Johns Manville is E-glass fiber coated with silane based sizing. is manufactured by direct winding of continuous glass fibers of defined diameter into a cylindrical roving package. It is... view more

Antifoam 2226 by KCC Basildon (Momentive) is an antifoam compound concentrate free from silicone polymers. It improves knock down and performance durability of organic antifoams. It is compatible... view more

Antifoam C133 by KCC Basildon (Momentive) is an antifoaming agent. It is a pseudoplastic compound of polydimethylsiloxane fluid and silica filler. It is recommended for epoxy resins. The shelf life... view more

Sintered high-molecular-weight PTFE. Possesses most heat-resistant. Does not generate pyrolysis gas at high temperatures... view more

Sintered high-molecular-weight PTFE. Possesses most heat-resistant. Does not generate pyrolysis gas at high temperatures... view more

9,10- Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide. Acts as a flame retardant. It is halogen-free. It is most effective where a gas / vapor phase radical inhibitor is required. Especially suited... view more

6H-Dibenz[c,e][1,2]oxaphosphotin-6-propanoic acid, butyl ester, 6-oxide. Acts as a flame retardant. It is halogen-free. It takes effect as a gas phase inhibitor. Especially suited for PUR... view more

10-Hydroxy-9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide. Acts as a flame retardant. It is halogen-free. It is most effective where a gas / vapor phase radical inhibitor is required... view more

KUMANOX 3120 (TSP) by Kumho Petrochemical is a styrenated phenol. Acts as an antioxidant for rubbers and surface modifier for epoxy compounds. It has high hydrophobicity due to its styrene... view more

CELLCOM XMH15 by Kumyang is high purity ultrafine magnesium hydroxide-based flame retardant. It is widely used in engineering plastics, epoxy resin, rubber, chemical industry building materials... view more

CELLCOM XMH55 by Kumyang is high purity ultrafine magnesium hydroxide-based flame retardant filler. It is used in engineering plastics, epoxy resin, rubber, chemical industry building materials... view more

Addocat®LTB is benzylamino-borontrifluoride-complex. Acts as an accelerator for epoxy/hardener-combinations and for the catalytic curing of epoxy resins. Also used for catalytic curing of epoxy... view more

Addolink®1701 is an aromatic diamine. Acts as a chain extender for high quality polyurethane and polyurea systems. Suitable for use in applications RIM two component PU systems (Reaction Injection... view more

Addolink® 1708 is a liquid aromatic diamine. Acts as a curative for the manufacturing of polyurethanes or polyurea elastomers. It also functions as a curing agent for advanced epoxy resins. It... view more

BA-59P™ by Lanxess is a brominated aromatic flame retardant. It is highly effective when reacted into epoxy resin systems due to its structural compatibility, high bromine content, and thermal... view more

DE-83R™ by Lanxess is decabromodiphenyl Oxide-based flame retardant. Offers very good thermal stability. DE-83R™ is recommended for thermoplastic, elastomeric and thermoset polymer systems such as... view more

REFORSIL 60 by LIONS INDUSTRIES is a ?-glycidyloxypropyl trimethoxysilane-based coupling agent containing epoxy group. It improves tearing strength, tensile strength, relative extensibility and... view more

REFORSIL 91 by LIONS INDUSTRIES is a silane-based coupling agent. It improves tensile strength, tearing strength, abrasive resistance, processability of rubber products and physical & mechanical... view more

Speedblock UV-P by Lambson (Sartomer) is 2-(2H-benzotriazol-2-yl)-p-cresol. Acts as a ultraviolet light absorber. can be used alone or with other additives such as hindered light stabilisers and... view more

Bisphenol A Diphosphate by Lemman Laboratories International is phosphoric trichloride. It acts as a halogen-free flame retardant in PC, ABS, PPO, HIPS, PC/ABS, PPO/HIPS, epoxy resin for rigid circuit, and other polymers. It appears as... view more

It is an excellent additive type fire retardant with over-all good performances. Also acts as a plasticizer. It appears as a white or light yellow resinoid solid, with good chemical stability... view more

Crystalline II type Ammonium Polyphosphate (APP) by Lemman Laboratories International acts as a flame retardant of fiber and rubber products as well as for epoxy resin & unsaturated PE resin. With high molecular weight (n>1000) and stability, it can be used as... view more

Dimethylolbutanoic acid. It acts as a good crosslinking agent and hydrophilic agent. It is odorless and appears as a free flowing white crystal with the molecular weight of 148.16. With good... view more

1,2-Epoxy-4(2-oxiranyl)-cyclohexane of 2,2-bis(hydoroxymethyl)1-butanol. It acts as a curing agent. It has an extremely small amount of ionic substances devoid of sodium or chlorine ions. The... view more

Solplus™ D510 by Lubrizol is a 100% active polymeric dispersant. Offers improved dispersion and stability. Provides improved self-levelling, improved resistance to color separation and improved... view more

Solplus™ D560 by Lubrizol is solvent-free 100% active polymer. Acts as a dispersing agent. Improves productivity and shortens dispersion time. Offers improved wetting & excellent storage stability... view more

Solplus™ D610 by Lubrizol is a 100% active polymeric dispersant. It offers improved dispersion and stability. It provides improved self-levelling and improved resistance to color separation and... view more

Solplus™ F100 by Lubrizol is a novel air release agent and hyperdispersant. It is silicone-free. It provides fast de-aeration, good fiber wetting and improved color compatibility. It is suitable for... view more

Solplus™ K500 by Lubrizol is a 100% active polymer. It acts as a dispersing agent. Typical dosage is 1-3% depending on the weight of pigment/filler dispersed. It offers improved pigment/filler... view more

Poly-[2,4-(piperazine-1,4-yl)-6-(morpholine-4-yl)-1,3,5-triazine]/Piperazin; Polymer with morpholine-2,4,6-trichloro-1,3,5-triazine reaction product. Acts as flame retardant. The protective layer... view more

Octocrylene (MFCI) by MFCI is 2-ethylhexyl 2-cyano-3,3-diphenylacrylate-based UV absorber. It shows insensitivity towards metal ions. Recommended for acrylic-, vinyl-, urea-formaldehyde-, alkyd- and... view more

Plastic Additive UV-P by MFCI is a UV absorber for polyester, epoxy, cellulose acetate, PVC, polystyrene, plexiglass and polyacrylonitrile resin. Recommended dosage level of Plastic Additive UV-P for unsaturated... view more

UV-328 (MFCI) by MFCI is a non-toxic, light stabilizer, capable of absorbing the UV radiation. It shows good compatibility, small mobility and easy processing properties. It delays yellowing, loss... view more

FR-8010 by MPI Chemie is a brominated flame retardant containing a high level of aromatic bromine. It possesses strong thermal stability. It exhibits good UV resistance and low blooming... view more

HPCTP by MPI Chemie is cyclic phenoxyphosphazene-based flame retardant. This thermally and hydrolytically stable additive possesses favorable electrical properties. It shows higher heat distortion... view more

UV-P (MPI Chemie) by MPI Chemie is hydroxyphenyl benzotriazole-based UV absorber. It imparts good light stability to a wide variety of polymers. UV-P dissipates the absorbed light energy from UV rays as... view more

Release agent for making molds and casting parts. Can be used for aluminium, chrome, steel molds. Provides excellent precise duplication of mold details, less rejects, faster production, semi-gloss... view more

Release agent for making molds and casting parts. Can be used for aluminium, chrome, steel molds. Provides excellent precise duplication of mold details, less rejects, faster production, semi-gloss... view more

Release agent for making molds and casting parts. Can be used for aluminium, chrome, steel molds. Provides excellent precise duplication of mold details, less rejects, faster production, semi-gloss... view more

Release agent for making molds and casting parts. Can be used for aluminium, chrome, steel molds. Provides excellent precise duplication of mold details, less rejects, faster production, semi-gloss... view more

Release agent for making molds and casting parts. Can be used for aluminium, chrome, steel molds. Provides excellent precise duplication of mold details, less rejects, faster production, semi-gloss... view more

C-TEC™ CT-ZHS by Marshall Additive Technologies is zinc hydroxystannate-based flame retardant and smoke suppressant. It has high purity and fine particle size. It is designed to achieve high levels of flame retardancy with... view more

C-TEC™ CTZB400 by Marshall Additive Technologies is an ultra-fine, zinc borate-based flame retardant/smoke suppressant. It offers increased char strength, reduced smoke, afterglow suppression and arc/track. It can retain... view more

BLS® 1710 by Mayzo is phenol, 2-(2H-benzotriazol-2-yl)-4-methyl. Acts as a UV absorber and light stabilizer. Exhibits strong absorption of ultraviolet radiation in the 300-400 nm region, low... view more

Amino zircoaluminate complex at 20 to 40% by weight in solvent. Acts as a coupling agent for the bonding of fiber reinforcements in thermoset resins. Improves coupling and chopping characteristics... view more

Amino zircoaluminate complex at 20 to 40% by weight in solvent. Acts as a coupling agent for the bonding of fiber reinforcements in thermoset resins. Improves coupling and chopping characteristics... view more

McLube 1711L by McLube is a hard, dry, bonded PTFE release coating for applications to hot surfaces. Offers multiple release cycles, no transfer to molded parts, no interference with post finishing... view more

White and pure calcium carbonate filler. Used in PVC plastisols, leather cloths, floor and wall coverings, thermoset and EP\UP molding compounds... view more

Microblanc 10 LA by Microfill K. Zafranas is calcium carbonate. Acts as a filler. It is designed to suit the needs of the food industry due to its particle size distribution and chemical purity of the raw material... view more

FluoroExtreme Thin Film Lube contains Krytox® GPL Grease (PFPE oil thickened with PTFE), which are packaged into convenient eight or fourteen-ounce aerosols. This packaging provides an easy solution... view more

Hi-Wax™ 1105A by Mitsui Chemicals is a processing aid . Improves tear strength, flexibility and slip properties in resin treatment of textiles. It is an acid modified-type grade that enables high... view more

Hi-Wax™ 2203A by Mitsui Chemicals is an acid modified-type processing aid. It enables high speed-sewing. It is reactive with alcohols, amines, isocyanates and oligomer having epoxy group. Hi-Wax™ 2203A improves... view more

Boron nitride. Acts as a conductive filler. It is a high-purity single crystal grade. It is of low surface area and high crystallinity. Offers high thermal conductivity, high temperature stability... view more

PolarTherm™ Boron Nitride Powder-PT140 by Momentive Performance Materials is a boron nitride grade. Acts as a conductive filler. Contains single-crystal hexagonal platelets. It is of high purity. Provides unique combination of thermal, electrical... view more

PolarTherm™ Boron Nitride Powder-PT160 by Momentive Performance Materials is a boron nitride grade. Acts as a conductive filler. It is of high purity. Contains single-crystal hexagonal platelets. Provides unique combination of thermal, electrical... view more

PolarTherm™ Boron Nitride Powder-PT180 by Momentive Performance Materials is a boron nitride grade. Acts as a conductive filler. It is of high purity containing single-crystal hexagonal platelets. Provides unique combination of thermal, electrical... view more

PolarTherm™ Boron Nitride Powder-PT350 by Momentive Performance Materials is a boron nitride grade. Acts as a conductive filler. It is of high purity containing single-crystal hexagonal platelets. Offers high temperature stability and outstanding... view more

Aluminium hydroxide. Used as a flame-retardant filler for the manufacture of halogenfree cable sheath and insulations... view more

Aluminium hydroxide. Used as a flame-retardant filler for the manufacture of halogenfree cable sheath and insulations... view more

Aluminium hydroxide. Used as a flame-retardant filler for the manufacture of halogen free cable sheath and insulations... view more

Used in latices, polyester resins, epoxy resins, acrylic resins, cross-linked elastomers, thermoplastics, polyurethanes, urea and phenolic resins. End products : belt conveyor, cables, carpet... view more

4MHHPA by Nan Ya Plastics is methtyl hexa hydro-phthalic anhydride (>98.5 wt%). Acts as a curing agent. It is produced by hydrogenation from MTHPA. It has low viscosity, light color and low... view more

HHPA1 by Nan Ya Plastics is hydroscopic hexa hydro-phthalic anhydride. Acts as a curing agent. It improves the quality of resins and their reactivity in the presence of air & their light fastness... view more

MTHPA2 by Nan Ya Plastics is methtyl tetra hydro-phthalic anhydride. Acts as a curing agent. It is produced by diels-alder condensation with maleic anhydride and isoprence. It is hydroscopic & has low... view more

THPA by Nan Ya Plastics is tetra hydro-phthalic anhydride. Acts as a curing agent. It is produced by diels-alder condensation with maleic anhydride and 1, 3-butadiene. It is compatible with epoxy... view more

UV-P is a drometrizole by Nanjing Lepuz Chemical. It acts as an ultraviolet light absorber. It is compatible with PVC, polypropylene, saturated polyester resin, polycarbonate, polymethyl... view more

Silane USi 2H21 by Nanjing Union Silicon Chemical is ß-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane. It functions as an adhesion promoter, surface modifier and dispersing agent. It is mainly used to improve the binding and... view more

Comptabilizer agent used in epoxy resins. Used as a mineral filler, a curing accelerator. Enhances mechanical and thermal properties (for example the glass transition temperature Tg). Nearly... view more

Comptabilizer agent used in epoxy resins. Used as a mineral filler. Enhances mechanical, barrier and thermal properties (for example the glass transition temperature Tg), chemical... view more

Triallyl cyanurate, silicon-dioxide blend. Acts as an accelerator for EPM and co-agent for peroxide-cured EP polymers. Reduces cure time and eliminates odor caused by sulfur co-agent. Improves the... view more

Tributoxyethyl phosphate, silicon-dioxide blend with antioxidant. Acts as a low-temperature plasticizer for NBR, and chlorinated PE. It may retard cure with large loadings. Incorporates rapidly... view more

Tetrapropenylsuccinic anhydride (3-dodecenylsuccinic anhydride). Acts as a epoxy resin hardener and also as a sizing agent, lubricant additive, viscosity index improver, pour point depressant... view more

RIKACID HF-08 by New Japan Chemical is an ester of alicyclic acid anhydride and polyalkylene glycol. Acts as a modifier for epoxy resin hardeners. It improves heat cycle, thermal shock property, shock... view more

Hexahydrophthalic anhydride. Is an alicyclic acid anhydride which acts as an excellent epoxy resin hardener. It enhances electric insulation, heat- and chemical resistance. It can produce clear and... view more

Methylbicyclo [2.2.1] heptane-2,3-dicarboxylic anhydride/Bicyclo [2.2.1] heptane-2,3-dicarboxylic anhydride. Acts as a resin hardener. It is a heat resistance-adding alicyclic acid anhydride... view more

4-methylhexahydrophthalic anhydride. Acts as a resin hardener. It has high heat resistance, chemical resistance, and electric insulation. As it is excellent in impregnating ability, it is used in... view more

Zinc Hydroxystannate by Niknam Chemicals acts as a flame retardant(FRLS/HFFR) and smoke suppressant. It can replace molybdenum trioxide in PVC FRLS cable compounds. Zinc Hydroxystannate is used in flexible PVC for wires and... view more

NISSOCURE® TIC-188 by Nippon Soda acts as an inclusion catalyst using imidazole as guest molecules as well as curing agent for epoxy resins. It is stable at room temperature, has a longer pot life. NISSOCURE® TIC-188... view more

Nordkalk W200 by Nordkalk is a low aspect ratio (L/D) wollastonite mineral (white, needle-shaped and naturally occurring calcium silicate mineral with the molecular formula CaSiO3). It is a... view more

Nordkalk W325 by Nordkalk is a low aspect ratio (L/D) wollastonite mineral (white, needle-shaped and naturally occurring calcium silicate mineral with the molecular formula CaSiO3). It is a... view more

Nordkalk W400 by Nordkalk is a low aspect ratio (L/D) wollastonite mineral (white, needle-shaped and naturally occurring calcium silicate mineral with the molecular formula CaSiO3). It is a... view more

Nordkalk W635 by Nordkalk is a low aspect ratio (L/D) wollastonite mineral (white, needle-shaped and naturally occurring calcium silicate mineral with the molecular formula CaSiO3). It is a... view more

Nordkalk Wicroll 10 by Nordkalk is a medium aspect ratio (L/D) wollastonite mineral (white, needle-shaped and naturally occurring calcium silicate mineral with the molecular formula CaSiO3). It is a... view more

Release Agent NL-30 by Nouryon is an external release agent in unsaturated polyester resins. Recommended on molds or forms made of metal, glass, melamine sheets, polyester and epoxy resins. Release Agent NL-30... view more

9,10-dihydro-9-oxa-10-phosphenanthrene-10-oxide(DOPO) by Novista acts as a phosphated flame retardant. Used in linear polyester, polyamide, epoxy resin and others, as well as widely used in textile, electronic equipment plastic and others... view more

DOPO-HQ/HCA-HQ/DOP-HQ/DPP-HQ by Novista is a halogen-free flame retardant. Acts as a curing agent with super PCB. Suitable for semiconductor packaging materials. DOPO-HQ/HCA-HQ/DOP-HQ/DPP-HQ is used in epoxy resin and LED... view more

Decabromodiphenyl Ethane(DBDPE) (Best Grade) by Novista acts as a environment-friendly flame retardant. Possesses excellent thermal stability, high content of bromine, strong UV-resistance and low toxicity, etc. Decabromodiphenyl Ethane(DBDPE) (Best Grade) is... view more

Decabromodiphenyl Ethane(DBDPE) (First Grade) by Novista acts as a environment-friendly flame retardant. Possesses excellent thermal stability, high content of bromine, strong UV-resistance and low toxicity, etc. Decabromodiphenyl Ethane(DBDPE) (First Grade) is... view more

Tetrabromophthalic anhydride. Acts as a flame retardant. Can be used in polyester, unsaturated polyester and epoxy resin. It can work with antimonous oxide as adding type flame retardant of... view more

Dry powder colloidal antimony pentoxide for use as a synergist with halogenated flame retardants in high performance epoxy and where a powder form of antimony pentoxide is prefered over liquid... view more

Dry powder colloidal antimony pentoxide for use as a synergist with halogenated flame retardants in high performance epoxy and where a powder form of antimony pentoxide is prefered over liquid... view more

TUBALL™ COMP_E EPOXY by OCSiAl is a masterbatch based on single wall carbon nanotubes, with a blend of liquid bisphenol-A and bisphenol-F epoxy resin as a carrier. Offers superior electrical... view more

2,4,6-Tribromophenol (TBP) by Oceanchem Group acts as a flame retardant. It is reactive. Offers good thermal stability. 2,4,6-Tribromophenol (TBP) is mainly recommended for epoxy resin and polyurethane... view more

Bisphenol A bis(diphenyl phosphate) by Oceanchem Group acts as a flame retardant. Its superiority is demonstrated in low volatility, excellent hydrolytic- and thermal stability that can tolerate... view more

Decabromodiphenyl Ethane (DBDPE) by Oceanchem Group acts as a flame retardant. It is neither acutely toxic nor teratogenic. It has high bromine content which makes it suitable for high temperature... view more

Decabromodiphenyl Oxide (DBDPO) by Oceanchem Group acts as a flame retardant. It is of high efficiency and broad spectrum. It is cost-effective. Offers good thermal stability and desired level of flame retardancy because of... view more

Zinc borate 2335 by Oceanchem Group acts as a synergistic flame retardant with antimony oxide. It has the smallest particle size. It reduces smoke evolution and adjust the balance of flame retardant... view more

D.E.H™ 20 by Olin is liquid aliphatic polyamine. It is used as curing agent for civil engineering applications and in the manufacture of epoxy-amine adducts. It provides a short pot-life... view more

D.E.H™ 24 by Olin is liquid aliphatic polyamine. Used as a curing agent. Offers a short pot-life... view more

Liquid aliphatic polyamine. Used as a curing agent. Offers a short pot-life... view more

Liquid aliphatic polyamine. Used as a curing agent... view more

Liquid cycloaliphatic polyamine. Used as a curing agent... view more

PETOL® 120-2 A by Oltchim is used as a lubricant and defoamer. It is poly (propylene oxide) homopolymer (PPG). PETOL® 120-2 A is also used as viscosity reducer and flexibleness agent for epoxy... view more

1, 2, 3-Propanetriol methyloxirane polymer. Acts as a flexibleness agent or plasticizer for epoxy resins. It is a polyoxypropylene triol with 1055 average molecular weight. Used in polyol blends for... view more

PETOL® 28-2 LM is poly (propylene oxide) homopolymer (PPG) by Oltchim. It is used as a lubricant and defoamer. It is suitable as a viscosity reducer and flexibleness agent for epoxy resins. PETOL®... view more

PETOL® 56-2 LM by Oltchim is poly (propylene oxide) homopolymer (PPG). It is used as a lubricant and defoamer. It is also used as viscosity reducer and flexibleness agent for epoxy resins. PETOL®... view more

Bis-[3-(triethoxysilyl) propyl] amine. Acts as a coupling agent. It is a colorless to greenish-yellow liquid. Provides bonds between inorganic substrates and organic polymers by improving organic... view more

gamma-Aminopropyltrimethoxysilane. Acts as a coupling agent. It is a colorless and transparent liquid. Provides superior bonds between inorganic substrates and organic polymers by improving... view more

N-phenyl-gamma-aminopropyltrimethoxysilane. Acts as a coupling agent and adhesion promoter. It is a colorless to yellowish transparent liquid. Suitable for many fillers and reinforced resin systems... view more

gamma-Aminopropyltriethoxysilane. Acts as a coupling agent. It is a colorless and transparent liquid. Provides superior bonds between inorganic substrates and organic polymers by improving organics... view more

gamma-Aminopropyltriethoxysilane. Acts as a coupling agent. It is a colorless and transparent liquid. Provides superior bonds between inorganic substrates and organic polymers by improving organics... view more

PRINTEX® XE 2 by Orion Engineered Carbons is a conductive carbon black. Exhibits low sensitivity to mechanical stress during processing & production and high electrical resistivity. Offers decreased... view more

SPB-100 by Otsuka Chemical is a phosphazene flame retardant specially formulated to give a high added value to products of the electrical, electronic, wand medical devices sector among other... view more

Azodicarbonamide. Acts as an ultra low temperature decomposition type foaming agent. Energy saving, improvement of manufacturing efficiency, cost reduction is possible by low-temperature foaming... view more

Azodicarbonamide. Acts as an ultra low temperature decomposition type foaming agent. Energy saving, improvement of manufacturing efficiency, cost reduction is possible by low-temperature foaming... view more

Azodicarbonamide. Acts as an ultra low temperature decomposition type foaming agent. Energy saving, improvement of manufacturing efficiency, cost reduction is possible by low-temperature foaming... view more

Azodicarbonamide. Acts as an ultra low temperature decomposition type foaming agent. Energy saving, improvement of manufacturing efficiency, cost reduction is possible by low-temperature foaming... view more

CRATEC® Chopped Strands 163D by Owens Corning is a collection of continuous glass filaments gathered into a single bundle. High performance chemistry is applied to optimize glass/matrix adhesion and... view more

High-performance, multi-resin compatible reinforcement used for filament winding fuel and chemical storage tanks, large diameter pipe, water treatment vessels, pressure vessels, reverse osmosis... view more

Direct roved reinforcement developed for use with epoxy resin systems in reinforced plastics applications such as filament winding and pultrusion. Its rovings are single-end (zero catenary)... view more

High-performance reinforcement designed specifically for pultrusion and filament winding. Designed specifically for use in polyester, vinylester and epoxy resin systems.It is a single-end... view more

High-performance reinforcement designed primarily for knitting and weaving applications. Designed specifically to achieve optimum results in polyester, vinylester and epoxy resin... view more

ROFLAM B7V by PCC Rokita is a halogen-, phenol- & solvent-free phosphor flame retardant. It is a phosphate-based monomer which exhibits low dynamic viscosity and has very good compatibility with many... view more

1062 Multi-End Roving by PPG Fiber Glass is a continuous filament, single-end strand roving glass fiber grade. Acts as a reinforcing agent. It incorporates a sizing chemistry that imparts high... view more

HYBON® 2001 by PPG Industries is a continuous filament, single-end strand roving glass fiber grade. Acts as a reinforcing agent. It consists of glass filaments honed with a multi-compatible sizing into a... view more

HYBON® 2002 by PPG Fiber Glass is a continuous filament, single-end strand roving glass fiber grade. Acts as a reinforcing agent. It is made of E-Glass fiber. Each package is in a wrap film with... view more

HYBON® 2006 by PPG Fiber Glass is a continuous filament, single-end strand roving glass fiber grade. Acts as a reinforcing agent. It is made of E-Glass fiber. Each package is in a wrap film with... view more

Direct draw roving, made of electrical (E) glass fiber. Designed for filament winding applications, which require maximum wet-out and wet-out consistency together with good abrasion resistance and... view more

It is a 100% active hydrazine. Works by releasing a ammonia-free gas by its thermal decomposition. Safe application in cellular insulation... view more

Tris (2-chloroethyl) phosphate of 10.8% phosphorous and 36.7% chloride content. Acts as an effective flame retardant. Used in urea-melamine, urea-formaldehyde, phenolic, thermoplastic resins... view more

Glycidyl methacrylate grafted ULDPE. Used as impact modifier for polyethylene terephthalate, polybutylene terephthalate and polycarbonate. Low crystallization rate and the slow nucleus formation are... view more

Pherst-ODPP by Polymate Additives is isooctyl diphenyl phosphite. It is a colorless transparent liquid. Acts as a heat stabilizer, assisting antioxidant for PVC, PP, polyester, ABS- and epoxy resin and as... view more

Pherst-TPP by Polymate Additives is isooctyl diphenyl phosphite. It is a colorless transparent liquid. Acts as a heat stabilizer, assisting antioxidant for PVC, PP, PA, polyester, ABS- and epoxy resin and as... view more

Plamtar-DOPO is 9,10-Dihydro-9-oxa-10phosphaphenanthrene-10-oxide. Acts as a flame retardant. It is halogen-free and reactive with olefins, ketones, epoxies. It is an effective substitute for... view more

Plamtar-DOPO-HQ is 6-(2, 5-Dihydroxyphenyl)-6H-dibenz [c,e] [1, 2] oxaphosphorine-6-oxide. Acts as a flame retardant. It is halogen-free. Compatible with epoxy resin for PCB... view more

FOSFLAM™ 140 by Polymer Additives Group is tributoxyethyl phosphate. It is phosphorus-based flame retardant. It offers low viscosity. FOSFLAM™ 140 is recommended for polyvinyl chloride (PVC)... view more

FOSFLAM™ 81 by Polymer Additives Group is low viscosity triaryl phosphate. It is phosphorus-based flame retardant. FOSFLAM™ 81 is designed for use in polyvinyl chloride (PVC), polyurethane (PU)... view more

FOSFLAM™ 83 by Polymer Additives Group is triaryl phosphate. It is phosphorus-based flame retardant. It provides low viscosity. FOSFLAM™ 83 is recommended for polyvinyl chloride (PVC), polyurethane... view more

FOSFLAM™ 84 by Polymer Additives Group is triaryl phosphate. It is phosphorus-based flame retardant. This grade offers low viscosity. FOSFLAM™ 84 is suitable for polyvinyl chloride (PVC)... view more

FOSFLAM™ 95 by Polymer Additives Group is triphenyl phosphate. It provides low viscosity. It is phosphorus-based flame retardant. FOSFLAM™ 95 is suitable for polyvinyl chloride (PVC), polyurethane... view more

bFI A 3745 by Polytives is a polymeric processing aid. It is a flow improver developed to reduce the melt viscosity of various polymers including PMMA and polymer systems thereby increasing the... view more

bFI A 3745_P by Polytives is a polymeric processing aid in powder form. It is a flow improver dveloped to reduce the melt viscosity of various polymers (PMMA) and polymer systems thereby increasing... view more

Gamma-aminopropyltrimethoxysilane. It acts as an adhesion promoter. Exhibits improvement in the bond between a substrate, filler or reinforcement and resins that reacts with amino group. Improves... view more

Gamma-aminopropylmethyldiethoxysilane. It acts as an adhesion promoter and surface modifier. Exhibits compatibility with glass, glass fibers, glass wool, mineral wool, silicic acid, quartz, sand... view more

N-beta-(amino ethyl)-gamma-amino propyl-trimethoxysilane. It acts as a cross-linker, coupling agent and adhesion promoter. Exhibits alkalinity and compatibility with urethanes, phenolics and... view more

Gamma-ureidopropyltriethoxysilane. It acts as an adhesion promoter and a surface modifier. It is 50% solution of silane in methanol. Exhibits compatibility with both inorganic materials (glass... view more

Gamma-glycidoxypropyltrimethoxysilane. It is an epoxy-functional silane and is a clear, light straw liquid. Acts as an adhesion promoter. Used in thermoplastics... view more

Melamine Cyanurate. Acts as non-halogen N flame retardant. Is stable when the temperature is lower than 300°C. Can be used in nylon, polyurethane, phenolic resin, epoxy resin, acrylic acid and... view more

High polymerization degree ammonium crystal type II ammonium polyphosphate without activating and surface treating. Acts as halogen free flame retardant. Offers very good thermal stability, near... view more

High polymerization degree crystal type II ammonium polyphosphate treated with silane. Acts as halogen free flame retardant. Offers very good thermal stability, near neutral and non-toxic smoke... view more

MicaShine® PFI A by Progressive Fillers is a natural mica. Acts as a filler. It is mechanically treated to give colorfast metallic finishes that cannot be duplicated with other engineered materials... view more

MicaShine® PFI B by Progressive Fillers is a natural mica. Acts as a filler. It is mechanically treated to give colorfast metallic finishes that cannot be duplicated with other engineered materials... view more

Plastitec FF by Proquitec is a renewable vegetal raw materials based primary monomeric plasticizer. Plastitec FF has an excellent power of solvation, being indicated for several applications, among them... view more

Plastitec FF Crystal is a renewable vegetal raw materials based primary monomeric plasticizer. Has an excellent power of solvation, being indicated for several applications, among them the... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Provides a buffering effect through... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Provides a buffering effect through... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Provides a buffering effect through... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Provides a buffering effect through... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Provides a buffering effect through... view more

D-5120 is a DCPD hydrocarbon thermoplastic resin by Puyang Changyu Petroleum Resins. It acts as a curing agent. It shows good compatibility with epoxy resin in ester solvent and polyurethane... view more

THPA (Tetrahydrophthalic anhydride) by Puyang Tiancheng Chemical acts as a hardener. It is recommended for use in polyester resins and plasticizers. It is soluble in benzene and acetone... view more

JADEWIN BP-1 by Qingdao Jade New Material Technology is a 2,4-dihydroxybenzophenone. Acts as a ultraviolet (UV) light absorber (280 – 320 nm range). Offers prevention of yellowing and improvement of... view more

JADEWIN UV 360 by Qingdao Jade New Material Technology is a 2,2'-methylenebis[6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol]. Acts as very low volatile ultraviolet (UV) light absorber... view more

JADEWIN UV328 by Qingdao Jade New Material Technology is a 2-(2'-hydroxy-3',5'-di-tert-butylphenyl)-5-chlorobenzotriazole. Acts as strong ultraviolet (UV) light absorber (in the 290~400 nm region)... view more

Tri phenyl phosphite. Acts as a stabilizer & antioxidant in polymer industry, as a catalyst in polyolefins, used as a viscosity modifier in epoxy resins, thermoplastics, SBR rubber, and as a... view more

Natural calcium silicate. Acts as a filler. Has very good reinforcing properties. Used in engineering technical plastics (i.e. polypropylene, polyamide, polyurethane) for the automotive industry... view more

Natural calcium silicate. Acts as a filler. Has very good reinforcing properties. Used in engineering technical plastics (i.e. polypropylene, polyamide, polyurethane) for the automotive industry... view more

RHINOL-103 by Radiant Chemicals acts as a wetting and dispersing agent. It is a polymeric dispersion with synergists. It is compatible with epoxy-, polyester plastisols-, oil base color enamels... view more

Used as an adhesion promoter for acrylic resins as well. Also used as a stabiliser for chlorinated hydrocarbons... view more

EPOTUF® 37-058 by Reichhold (Polynt) is an aliphatic, monofunctional, 100% solids epoxy diluent based on Alkyl glycidyl ether (C12-C14). It is a colorless liquid. Exhibits low viscosity and low... view more

EPOTUF® 37-601 by Reichhold (Polynt) is a modified cycloaliphatic amine adduct based on isophorone diamine. Exhibits low viscosity, light color, excellent chemical resistance, good epoxy compatibility, good... view more

EPOTUF® 37-618 by Reichhold (Polynt) is a solution of polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins... view more

EPOTUF® 37-620 by Reichhold (Polynt) is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF® epoxy resins. Exhibits low viscosity, resilience and impact resistance. It is... view more