SCONA® TPPP 8112 GA by BYK is an adhesion promoter and coupling agent for natural fiber compounds in polypropylene. In TPE-S overmolding compounds, it improves adhesion on hard substrates (such as... view more

SCONA® TSEB 2113 GB by BYK is a modifier for improved impact strength. It is used as a dispersing aid for fillers (ATH, Mg(OH)2) in polyethylene compounds. It is ethylene butyl acrylate copolymer... view more

SCONA® TSIN 4013 GC by BYK is a modifier to improve the impact strength of polyamides and an adhesion promoter in TPE compounds. It is a polyolefin block copolymer functionalized with a maleic acid... view more

SCONA® TSKD 9103 by BYK is a modifier to produce high-impact-resistant polyamide compounds and adhesion promoters. It is styrene-ethylene/butylene-styrene block copolymer (SEBS) functionalized with... view more

SCONA® TSPE 2102 GAHD by BYK is a coupling agent and compatibilizer for PA/PE blends. It is HDPE highly functionalized with maleic anhydride. It is used for polyethylene compounds with glass fibers... view more

Aluminum stearate. Acts as a lubricant. It is produced from a high quality, tallow derived fatty acid for grease, lacquer and polymer applications requiring a finely divided powder with good... view more

Alugel® 30 HE Veg by Baerlocher is aluminum stearate. It acts as a lubricant. It is derived from vegetable in the form of distearate. It is applicable for thermosetting plastics and thermoplastics... view more

Baerolub 40 by Baerlocher is used as an internal and external lubricant for rigid conversion modes. Reduce friction occuring between molecule chains of PVC. Baerolub 40 is used in hollow articles... view more

Ceasit AV/PA by Baerlocher is a calcium stearate grade. It acts as an acid scavenger & lubricant. Available as low dusting granules. Offers excellent lubricity, stabilizing effect, high cost... view more

Ceasit AV/PA Veg by Baerlocher is a vegetable-based calcium stearate grade. It acts as an acid scavenger and lubricant. Available as low dusting granules. Offers excellent lubricity, stabilizing effect... view more

Antioxidant Lknox 2365 by Baoding Lucky Chemical is 2-(4,6-Diphenyl-1,3,5-triazin-2-yl)-5-[(hexyl)oxy]-phenol. Acts as an antioxidant. Is mainly applicable to the after-treatment processing and stabilizing of unsaturated... view more

Light Stabilizer UV-100 by Baoding Lucky Chemical is an effective light stabilizer. It exhibits good stabilization of polypropylene (PP) and nylon fiber by combination with UV-4050H. It improves heat stability and weathering... view more

Light Stabilizer UV-90 by Baoding Lucky Chemical is an effective light stabilizer. It is highly compatible with polyolefin, acrylonitrile butadiene styrene (ABS) and nylon... view more

BM Waxamide EBS by Behn Meyer Group is ethylene-bis-[stearylamide]. Acts- as an external lubricant, improving flow and as anti-blocking agent when used in rigid PVC, external lubricant, release agent... view more

Antioxidant PKY 618 is a 3,9-Bis(octadecyloxy)-2,4,8,10-tetraoxa-3,9 diphosphaspiro[5.5]undecane. Acts as an anti-oxidant containing the structure of bis-phosphite pentaerythritol ester. It has a better... view more

B-215 acts as a complex antioxidant. Has extrusive processing stability to polyolefin and has long term protective action. Can effectively restrain thermal degradation and oxidation degradation of... view more

B-225 by Beijing Additives Institute acts as a complex antioxidant. Has extrusive processing stability to polyolefin and has long term protective action. Can effectively restrain thermal degradation and... view more

B-900 acts as a complex antioxidant. Has extrusive processing stability to polyolefin and has long term protective action. Can effectively restrain thermal degradation and oxidation degradation... view more

Poly{[6-(1,1,3,3-tetramethylbutyl)amino]-1,3,5-triazine-2,4-diyl][2,2,6,6,tetramethyl-4-piperidinyl]imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]}. Acts as a light stabilizer. Has... view more

Pentaerythrityle tetrak-is[ß-(3.5-di-tert-butyl,4-hydroxyphenyl- propionate]. Acts as an antioxidant. Is non-poisonous, non-discoloring as well as nonstaining and is an excellent top-quality... view more

Antioxidant JY-1076 by Beijing Jiyi Chemicals is octadecy[ß-(3.5-di-tert-butyl-4-hydroxyphenyl)propoin-ate]. Acts as an antioxidant. Antioxidant JY-1076 is odorless, tasteless and less toxicity and stable to light so that it can... view more

Tris-(2.4-di-tert-butyl-phenyl phosphate). Acts as an antioxidant. Has low toxicity, good thermostability, non-hydrolyzable and good effect with HALS. Offers very good resistance to extraction by... view more

Antioxidant JY-215 by Beijing Jiyi Chemicals is blend antioxidant and specially made up of main antioxidant (phenolic antioxidant) and secondary antioxidant (phosphate costabilizer) at a certain ratio. Has very low... view more

Antioxidant JY-220 by Beijing Jiyi Chemicals is blend antioxidant is specially made up of main antioxidant (phenolic antioxidant) and secondary antioxidant (phosphate costabilizer) at a certain ratio. Has very low... view more

Odyssey OB-1 (CI 393) by Beijing Odyssey Chemicals is 2,2-(1,2-Ethenediyldi-4,1-phenylene) bisbenzoxazole. Acts as an optical brightener in polymer substrates such as PC, rigid PVC, ABS, PP, PS, HIPS, EVA and PA. Produces... view more

NYLON IMPACT MODIFIER ST-G-P01 by Beijing Polyadd Chemical Materials Corporation is a maleic anhydride grafted polymer. It is based on a polyolefin elastomer (Poe) with high flexibility and... view more

ZT-101 by Beijing Stable Chemical is a heat stabilizer of vinyl chloride polymer fiber, ray, polyamide and phenolics. It is used as a catalyzer for synthesizing polyurethane foam and silicon rubber... view more

Tiangang® AO-1010 by Beijing Tiangang Auxiliary is a sterically hindered phenolic antioxidant. It is a highly effective, non-discoloring processing and long-term heat stabilizer for organic substrates such as plastics... view more

Tiangang® AO-1076 by Beijing Tiangang Auxiliary is high efficiency hindered phenolic antioxidant. It can effectively prevent the oxidative degradation of polymer materials due to high temperature and exposure to oxygen... view more

Tiangang® AO-168 by Beijing Tiangang Auxiliary is the effective phosphite processing aid, which prevents the oxidative degradation of polymer materials during processing. It exhibits low color impact, high efficiency, low... view more

Tiangang® AO-DLTDP by Beijing Tiangang Auxiliary is a high-efficiency thioester auxiliary antioxidant. It is widely added to organic compounds to inhibit thermal-oxidative aging of polymers, prevent mechanical strength... view more

Tiangang® AO-DSTDP by Beijing Tiangang Auxiliary is a high-efficiency thioester auxiliary antioxidant. It is added to organic compounds to inhibit the thermo-oxidative aging of polymers, prevent the decline of mechanical... view more

Available as chopped fibre form. Chopped fibres are bound together with polimeric binders. Coating : polyamide 12. Sizing : thermoplastic polyester. Used for : PA, PPS, PBT, PET. Creates an... view more

Antioxidant BC-1010 by Belike chemicals is Pentaerythritol-tetra-[ß-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate]. It is a hindered phenolic anti-oxidant. It has lots of excellent performances, such as non-toxic... view more

Antioxidant BC-1076 by Belike chemicals is octadecyl ß-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate. It acts as an anti-oxidant. It is non-toxic, eco-friendly with well heat-proof & water-proof. It gives an... view more

Antioxidant HN-215 by Belike chemicals is a high performance blending anti-oxidant, combined with HN-B168 and HN-1010. It is a white powder, soluble in organic solution such as aromatics, chloroform, cycle-hexane... view more

Complex antioxidant BC-B215 by Belike chemicals is composition of pentaerythritol-tetra-[ß-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] and tris(2.4-di-tert-butyl-pheny)phoshpite. It acts as an anti-oxidant. It is a... view more

Composition of pentaerythritol-tetra-[ß-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] and tris(2.4-di-tert-butyl-pheny)phoshpite. It acts as an anti-oxidant. It is a complex anti-oxidant which is... view more

TPA-10.5 by Besler Tekstil is a boron-free, ECR-glass chopped strand for PA reinforcement with silane sizing. It shows excellent mechanical properties, low discoloration performance and optimal strand... view more

TPA-13 by Besler Tekstil is a boron-free, ECR-glass with silane sizing. This chopped strand offers improved bulk density for less storage and handling costs. It provides excellent mechanical... view more

Chemical inhibitor 168 by Binhai Jinxiang Chemical Auxiliary is tris(2,4-di-t-butylphenyl)phosphite. It acts as an anti-oxidant. It appears as a white crystalline powder. It is widely used in polyethylene, polypropylene, polycarbonate... view more

Chemical inhibitor 245 by Binhai Jinxiang Chemical Auxiliary acts as an anti-oxidant, stabilizer of light and an effective asymmetric hindered phenolic chemical inhibitor. It features high efficiency, low volatility, resistance to... view more

1, 3, 5 - Trimethyl - 2, 4, 6 - three (3, 5 - tert-butyl - 4 - hydroxybenzyl) benzene. It acts as an anti-oxidant and a high molecular weight hindered phenolic chemical inhibitor. It features high... view more

Chemical inhibitor 626 by Binhai Jinxiang Chemical Auxiliary is bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphite. It acts as an anti-oxidant and phenolic chemical inhibitor. It appears as a white crystalline powder or in... view more

Mixture of poly[[6 -[(1,1,3,3- tetramethylbutylbutyl)imino]-1,3,5-triazine-2 ,4-twoyl] -[2 - (2,2,6, 6 -tetramethyl-piperidine-yl)-sub-amino-hexamethylene- [4... view more

CR-85 by BioTio is rutile titanium dioxide pigment. It is produced by chloride process. It is characterized by outstanding combination of excellent color and undertone. It is suitable for polyolefin... view more

BIOMASTER 801 by Biomaster is a compound possessing silver ion as active agent. Acts as an antimicrobial agent. It prevents the growth of bacteria by releasing silver ions. It provides permanent... view more

Brominated polystyrene. Acts as a flame retardant. Provides outstanding thermal stability and electrical performance. It is particularly suitable for engineering plastic applications such as... view more

Biofr DBDE by Bioray Chem is decabromodiphenyl ethane. Acts as a flame retardant. Has very good thermal stability and high bromine content making it a prime candidate for high temperate applications... view more

Biofr IPPP-35 by Bioray Chem is isopropyl phenyl diphenyl phosphate. Acts as a flame retardant. Has good compatibility, low viscosity, low toxicity, oxidation and thermal stability. Can improve wear... view more

Biofr IPPP-50 by Bioray Chem is isopropyl phenyl diphenyl phosphate. Acts as a flame retardant. Has good compatibility, low viscosity, low toxicity, oxidation and thermal stability. Can improve wear... view more

Biofr IPPP-65 by Bioray Chem is isopropyl phenyl diphenyl phosphate. Acts as a flame retardant. Has good compatibility, low viscosity, low toxicity, oxidation and thermal stability. Can improve wear... view more

BRUGGOLEN® C313 by Brüggemann is an organic heat stabilizer for temperatures up to 120°C. It provides prolonged open time and toughness. It offers a highly cost-effective system for moldings. It is added... view more

BRUGGOLEN® H11 by Brüggemann is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Acts as an antioxidant and heat stabilizer. Provides an excellent... view more

BRUGGOLEN® H20 by Brüggemann is a mixture of amine based antioxidants and co-stabilizers in powder form. Acts as a heat stabilizer. Provides powerful protection to finished parts under aggressive... view more

BRUGGOLEN® H204 by Brüggemann is a mixture of amine-based antioxidants and costabilizers in powder form. Acts as a heat stabilizer. Offers powerful protection of finished parts under aggressive... view more

BRUGGOLEN® H310F by Brüggemann is a very efficient synergistic mixture of cuprous and halogen compounds along with an effective lubricant. Acts as a heat stabilizer and antioxidant for polyamides... view more

BUDIT® 3 Series by Budenheim is a halogen-free flame retardant. There are three major routes to attack fire: intumescent systems, char formation synergistic with gas phase activity and unflammable... view more

BUDIT® 6 Series by Budenheim is a halogen-free flame retardant. There are three major routes to attack fire: intumescent systems, char formation synergistic with gas phase activity and unflammable... view more

BUDIT® F24 by Budenheim is an endothermic blowing agent, which decomposes under heat to release gases like carbon dioxide. It consumes heat during reaction. BUDIT® F24 is safe to handle as if the... view more

ST-83B by CAI Performance Additives is a laser additive with the ability to enhance marking capabilities. It offers superior performance and exhibits strong marking contrast, defined line edge detail and... view more

ST-85D by CAI Performance Additives is a laser additive designed to enhance marking capabilities. It can make white patterns in dark-colored plastics, making it suitable for light-on-dark writing in polyolefins... view more

ST-CE37 by CAI Performance Additives is a polymeric epoxy functional chain extender. It improves polycondensation resin viscosity characteristics, mechanical properties and inhibits hydrolysis. It is suitable... view more

ST-HT10 by CAI Performance Additives is a high-performing polymeric anti-hydrolysis agent. It offers superior protection from degradation over a 60-day period in polyamides. It can be used in many resins, such... view more

ST-HT13 by CAI Performance Additives is an anti-hydrolysis monomeric additive. It can be used in many resins, such as urethanes, polyamides, and polyester. It is used in medicine, automotive, and industrial... view more

Wet ground muscovite mica which preserves the natural luster and sheen and permits to reach a higher lamellarity. Particularly recommended for plastics reinforcement and acts also as a releasing... view more

Dry ground muscovite mica recommended when whiteness or coloration are important factors. Insoluble in water, only attacked by hydrofluoric acid, good arc resistance and transparent to microwaves... view more

Dry ground muscovite mica recommended when whiteness or coloration are important factors. Insoluble in water, only attacked by hydrofluoric acid, good arc resistance and transparent to microwaves... view more

Dry ground muscovite mica recommended when whiteness or coloration are important factors. Insoluble in water, only attacked by hydrofluoric acid, good arc resistance and transparent to microwaves... view more

Dry ground muscovite mica recommended when whiteness or coloration are important factors. Insoluble in water, only attacked by hydrofluoric acid, good arc resistance and transparent to microwaves... view more

Anatase titanium dioxide. Used in synthetic fiber delustering and in plastic color concentrates. Also suitable for use in polyamide, polyester, and cellulose-viscose fibers... view more

BLACK PEARLS® 4840 by Cabot is a specialty carbon black. Exhibits exceptional surface quality and retention of mechanical properties. Offers high levels of UV protection and easy processing due to a... view more

Carbon black. Used in interior/exterior automotive, high color electronic, appliance, business machine applications and high color thermoform sheet applications. Offers a balance of color and... view more

Carbon black pigment masterbatch. It is compatible with LDPE, LLDPE, HDPE, PP, ABS, SAN, PS and ethylene copolymers. It also offers a limited suitability in some PA, PVC, PET and PC applications. It... view more

PLASBLAK® XP6406A by Cabot is a carbon black pigment. It acts as an antioxidant. It provides high coloring performance, enables glossy and smooth surface appearance and good retention of mechanical... view more

Jet carbon black pigment masterbatch with polyamide-6 as carrier polymer. It is compatible with PA-6, PA-6.6 and filled PA. It retains good physical properties in the colored articles. It is... view more

IncroMax™ 400 by Cargill acts as a friction control and anti-tack agent for high temperature or polar polymers at very low addition levels. It is suitable for film & sheet extrusion as well as... view more

Ionphase™ U3 by Cargill acts as a permanent anti-static agent. It is a halogen-free, non-migrating, not humidity dependent, recyclable and ready-to-use polymer additive. It provides control & safety... view more

Solvent Yellow 98 is a monoazo-based solvent dye by Changzhou Energetic & Reliable. It is recommended for plastics. Solvent Yellow 98 is compatible with PS, ABS, PVC-R, PC and PET. It has limited... view more

Zonyl® MP 1000 by Chemours is a free-flowing PTFE powder-based lubricant. It imparts low surface energy and enhance performance in lubricants under severe conditions. It provides anti-stick surfaces... view more

Zonyl® MP 1300 by Chemours is a free-flowing, PTFE, powder designed for use as an additive in other materials or as a dry lubricant. It is a good electrical insulator, does not absorb water and... view more

Zonyl™ MP 1400 by Chemours is a free-flowing, PTFE powder designed for use as an additive in other materials or as a dry lubricant. It is a good electrical insulator, does not absorb water and highly... view more

Zonyl™ MP 1400F by Chemours is a white free-flowing, PTFE powder-based lubricant. It is a good electrical insulator and does not absorb water. It shows resistance towards weathering and reduces... view more

Bis(2,6-diisopropylphenyl)carbodiimide by Chemreagents is used as an anti-hydrolysis agent. It helps prevent polymer degradation. Compatible with PET, PBT, PA, CO-PET, PU, TPU, CPU, TPEE, EVA, PLA... view more

SILICONE WAX SILIMER 5060 by Chengdu Silike Technology is a newly developed modified silicone product that contains both a silicone chain and some active functional groups. Helps in the processing of plastics and elastomers. It... view more

SILIKE® LYSI-100 by Chengdu Silike Technology is 70% dimethylsiloxane and 30% silica-based thermoplastic additive. Acts as a slip agent. Offers significantly improved flowability of resin, good dispersion and processing... view more

SILIKE® LYSI-100A by Chengdu Silike Technology is 55% dimethylsiloxane and 45% silica-based thermoplastic additive. Acts as a slip agent. Offers significantly improved flowability of resin, good dispersion and processing... view more

SILIKE® LYSI-300A by Chengdu Silike Technology is 55% dimethylsiloxane and 45% silica-based thermoplastic additive of high molecular weight and better dispersion properties. Acts as a slip agent... view more

SILIKE® LYSI-407 by Chengdu Silike Technology is a non-migratory, 30% ultra high molecular weight siloxane polymer dispersed in nylon 6 (PA6) resin. Exhibits enhanced fuel resistance, reduced smoke... view more

Environment-friendly flame retardant for engineering plastic. Used used for PBT, PET, PA6, PA66, fiberglass strengthening PBT, PET ,PA6, PA66. Possesses thermal stability and light-resistant. Offers... view more

Brominated epoxy resins. Used for PBT,PET,ABS,PA, PC/ABS alloy, HIPS. Possesses thermal stability and light- resistant properties. Offers non-blooming properties... view more

Environment-friendly flame retardant. Used for nylon strengthening fiberglass. Possesses thermal stability. Offers very good electrical and processing performance... view more

Melamine Cyanurate. Used for the production of E&E and automotive parts. Possesses cost efficient with good thermal stability... view more

Melamine cyanurate. Acts as a non-halogenated flame retardant. Is suitable to the extrusion and injection molding. It is also used for electrical and electronic applications, connectors, switches... view more

Chiguard® 1300 by Chitec Technology acts as a light stabilizer for polyamides and heat stabilizer for polyethylene glycol system. It also functions as anti-yellowing agent for PU... view more

Chiguard® 234 by Chitec Technology is benzotriazole-based UV light absorber. It has lowest volatility which makes it especially useful for those applications involving high temperature processing. Chiguard® 234 is... view more

Chiguard® 380 by Chitec Technology acts as a UV light stabilizer based on benzozaxinone. It offers high heat-stability and light fastness properties. It provides twice absorption at UV-A range than... view more

Chiguard® 5431 by Chitec Technology acts as an UV light absorber that belongs to the family of substituted benzotriazoles which protects against ultraviolet radiation. It offers very low volatility... view more

Chiguard® 770 by Chitec Technology acts as a hindered amine light stabilizer (UV light stabilizer). It provides light stability and long-term heat stability. Chiguard® 770 is particularly suitable for those... view more

Blowing agent masterbatch with EVA carrier resin. Suitable for ABS, nylon, polyethylene, polypropylene and polystyrene. Used in polymer processing applications such as blow molding, injection... view more

It acts as an antioxidant. Suitable for polyamide (nylon). Used in polymer processing applications such as blow molding, injection molding, rotational molding, and extrusion. Also used in extruded... view more

It acts as a mold release agent. Suitable for polyamide, polyethylene, polypropylene, POM and polystyrene. Used in polymer processing applications such as blow molding, injection molding, rotational... view more

Titanium dioxide (80%) with EVA carrier resin. It is a white colored pigment. Suitable for PE, PP, EVA, PS, ABS and nylon. Used in injection molding, blow molding, thermoforming and rigid packaging... view more

Titanium dioxide (80%) with EVA carrier resin. It is a blue-white colored pigment. Suitable for PE, PP, EVA, PS, ABS and nylon. Used in injection molding, blow molding, thermoforming and rigid... view more

Mastertint® KU-9635 by Chrostiki is the most efficient, very intense and opaque black pigment. It has extra blue tone and exhibits high jetness property. It is compatible with polyamide (PA), acrylonitrile... view more

AddWorks® LXR™ 568 MP by Clariant is a light- and heat stabilizer. It combines outstanding color and melt flow protection with a good resistance to hydrolysis. Shows enhanced hydrolytic stability... view more

AddWorks® TFB 117 by Clariant is a heat- and light stabilizer for polyamides. It is a synergistic solution with better processability (spinnability) even at low processing temperatures. When... view more

Ceridust® 1060 VITA by Clariant is a dispersing agent based on a bio-based, micronized polar modified wax. It improves the color strength of plastic parts and pigments from re-agglomeration. Provides good... view more

Ceridust® 3910 by Clariant is a micronized amide wax. Acts as dispersing agent and lubricant. Compatible with engineering polymers like PS, PA, PC, PET, PBT and thermoplastic polyurethane. Exhibits... view more

Ceridust® 5551 by Clariant is a micronized, partly saponified ester of montanic acid. Acts as a lubricant and dispersing agent for masterbatches. Offers excellent scratch resistance, matting effect... view more

AB 4139 PE by Colloids is a high clarity silica-based anti-block and IR filter masterbatch in PE carrier resin. AB 4139 PE prevents films sticking together during and after processing. It is... view more

Black colored pigment masterbatch containing effective substance in ethylene vinyl acetate copolymer based carrier system. It contains a small particle size furnace type carbon black with good UV... view more

Black colored pigment masterbatch containing effective substance in ethylene vinyl acetate copolymer based carrier system. It contains a high concentration of a general purpose furnace type carbon... view more

FA 5467 EV by Colloids is a blowing agent masterbatch in EVA carrier resin. FA 5467 EV lowers density reducing part weight leading to lower costs. It is compatible with PE, PS, ABS, PA and PP. It is... view more

A concentrated universal black masterbatch giving effective coloration in a variety of polymer systems. It is recommended for injection molding, extrusion and compound applications requiring good... view more

AMAPLAST® Blue HB by ColorChem International is a halogen-free aminoketone soluble dye. Compatible with ABS, acrylic, nylon, PBT, PC, PET, PSU, polyetherimide and polystyrene. Exhibits excellent... view more

AMAPLAST® Green B5 by ColorChem International is an anthraquinone, non-halogen soluble dye. Compatible with ABS, acrylic, nylon, PBT, PC, PET, PSU, polyetherimide and polystyrene. AMAPLAST® Green B5... view more

AMAPLAST® Orange GXP by ColorChem International is a soluble dye aminoketone. It is a non-halogen compound. Exhibits excellent masstone & tint tone light fastness in PS. Shows excellent mass tone... view more

AMAPLAST® Orange LFP by ColorChem International is a halogen-free soluble dye aminoketone. Compatible with ABS, acrylic, nylon, PBT, PC, PET, PSU, polyetherimide and polystyrene. Shows excellent... view more

AMAPLAST® Orange N by ColorChem International is a soluble dye. It is a halogen-free compound. Shows excellent masstone light fastness in PS. Exhibits good masstone light fastness in PC and good... view more

Talc ore. It is a crushed, inorganic powder. Exhibits lubrication, flow, high wet whiteness and anti-stick characteristics. Provides resistance to fire, acid, creeping and insulation. Possesses high... view more

Talc ore. It is a crushed, inorganic powder. Exhibits lubrication, flow, high wet whiteness and anti-stick characteristics. Provides resistance to fire, acid, creeping and insulation. Possesses high... view more

Talc ore. It is a crushed, inorganic powder. Exhibits lubrication, flow, high wet whiteness and anti-stick characteristics. Provides resistance to fire, acid, creeping and insulation. Possesses high... view more

Talc ore. It is a crushed, inorganic powder. Exhibits lubrication, flow, high wet whiteness and anti-stick characteristics. Provides resistance to fire, acid, creeping and insulation. Possesses high... view more

Talc ore. It is a crushed, inorganic powder. Exhibits lubrication, flow, high wet whiteness and anti-stick characteristics. Provides resistance to fire, acid, creeping and insulation. Possesses high... view more

DCC Yellow 2GTM by DCL Corporation is s a green shade yellow plastic grade pigment with excellent heat stability. It exhibits minimal warpage, excellent masstone & tint light fastness, excellent masstone &... view more

DCC Yellow 2GTS by DCL Corporation is a clean green shade yellow plastic grade pigment with high color strength and saturation. It is particularly suitable for use in polyamide, PE, PP, PS & PET due... view more

Allnico® PBOX by DSM is phenylenebisoxazine. Acts as a chain extender for polyesters and polyamides. Serves as a cost effective, fast and flexible way to increase molecular weights in a strictly... view more

Allnico® CBC by DSM is carbonylbiscaprolactam. Acts as a chain extender for polyesters and polyamides. Serves as a cost effective, fast and flexible way to increase molecular weights in a strictly... view more

DAIFREE FB-962 by Daikin is an internal mold release agent. It is free from PFOA and PFOS. It offers excellent anti-sticky performance, improved roll processability and surface modification. It is... view more

POLYFLON PTFE LOW POLYMER L-5 by Daikin is a fluoropolymer-based dry lubricant. It offers superior handling and dispersing performance. It enhances wear resistance, non-stick properties and reduced coefficient of... view more

POLYFLON PTFE LOW POLYMER L-5F by Daikin is polytetrafluoroethylene-based dry lubricant. It offers superior handling and dispersing performance. It provides enhanced wear resistance, non-stick properties and reduced... view more

Light Stabilizer 770 by Dalian Richfortune Chemicals is a is a hindered amine light stabilizer (HALS). It is compatible with polypropylene, polyethlene, styrenics (acrylonitrile butadienestyrene)... view more

GB-CKP 105 by Datong Coal Industry Jinyu Kaolin Chemical is a GB-CKP 105 is a superior modified aluminum silicate. Acts as a filler. It is made up of high purity kaolinite through strictly controlled process of crushing, stripping... view more

Arc Yellow™ ZQ-16 by DayGlo Color is a solid solution of fluorescent dyes in a thermoplastic modified polyamide resin. Exhibits excellent heat stability and the maximum recommended processing... view more

Aurora Pink® Z-11-3 by DayGlo Color is a solid solution of fluorescent dyes in a thermoplastic polyamide resin. Offers bright shades, good heat stability and tinctorial strength. To ensure complete... view more

Aurora Pink® ZQ-11 by DayGlo Color is a solid solution of fluorescent dyes in a thermoplastic modified polyamide resin. To ensure complete color development when incorporating the pigment into... view more

Blaze Orange™ Z-15-3 by DayGlo Color is a solid solution of fluorescent dyes in a thermoplastic polyamide resin. To ensure complete development of the fluorescent color effect, the pigment must be... view more

Blaze Orange™ ZQ-15 by DayGlo Color is a solid solution of fluorescent dyes in a thermoplastic modified polyamide resin. When the pigment is incorporated into plastic resins, it is essential that... view more

FR 300 by Dead Sea Periclase is magnesium hydroxide treated with amino silanes. Acts as a flame retardant. FR 300 is used in wire and cables for power transportation and telecommunications... view more

Deltaplast PA-13062 by Delta Tecnic is polyamide (PA) pigment masterbatch. It is designed for THHN cables and building wires. It imparts good dispersion, improved production processability and low... view more

Deltaplast PA-13138 by Delta Tecnic is polyamide (PA) pigment masterbatch. It is designed for THHN cables and building wires. It imparts good dispersion, improved production processability and low... view more

Deltaplast PA-20490 by Delta Tecnic is polyamide (PA) pigment masterbatch. It imparts good dispersion, improved production processability and low dosage levels. It provides color, color uniformity... view more

Deltaplast PA-30747 by Delta Tecnic is polyamide (PA) pigment masterbatch. It imparts good dispersion, improved production processability and low dosage levels. It provides color, color uniformity... view more

Deltaplast PA-41257 by Delta Tecnic is polyamide (PA) pigment masterbatch. It imparts good dispersion, improved production processability and low dosage levels. It provides color, color uniformity... view more

2',3-bis [[3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionyl]] propionohydrazide. It is a kind of metal deactivator, which can be used either independently or together with antioxidant. OMNISTAB AN... view more

3,3'-bis (3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-hexamethylenedipropionamide. Acts as a phenolic antioxidant. It exhibits good heat-resisting and water-resisting performance. Used for polyolefins... view more

Tris(2,4-ditert-butylphenyl) phosphite. Acts as a secondary antioxidant. It is hydrolytically stable and exhibits synergy with primary antioxidants. OMNISTAB AN 168 maintains color properties and... view more

Tris (3,5-di-tert-butyl-4-hydroxybenzyl) isocyanurate. Acts as a phenolic antioxidant. It is odorless, tasteless and non-discoloring. OMNISTAB AN 3114 is stable to light and exhibits less toxicity... view more

Phenolic antioxidant. It is blend of antioxidants AN 1010 and AN 168. It offers an improvement of long term thermal stability along with low color formation. OMNISTAB AN B215 is economical in price... view more

Antioxidant 1076 is a n-octadecyl-ß-(4-hydroxy-3,5-di-tert-butyl-phenyl) propionate by Disheng Technology. It acts as a nonpolluting and nontoxic antioxidant. It offers heat-resistance and... view more

Antioxidant 3114 is a tris-(3, 5-di-tert-butyl-4-hydroxybenzyl) isocyanurate by Disheng Technology. It acts as an anti-oxidant. It is compatible with ABS, polyester, nylon, PE, PS, PVC, PU... view more

Antioxidant 626 (Disheng Technology) by Disheng Technology is a highly-effective solid phosphite ester-based antioxidant. It can be dissolved in toluene and dichloromethane. It offers effective protection to color of the polymer. It... view more

Light Stabilizer UV-944 is a poly[[6-[ (1,1,3,3 - tetramethylbutyl)amino]-1,3,5 - triazine-2,4-diyl][ (2,2,6,6 - tetramethyl -4- piperidinyl)imino ] -1,6–hexanediyl [ (2,2,6,6-tetramethyl... view more

UV Absorber 0 is a 2,4-dihydroxybenzophenone by Disheng Technology. It acts as a high performance UVA that can absorb 280-340nm ultra-violet light. It offers light colors, non-toxicity, good process... view more