OK
The material selection platform
Polymer Additives
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
125 products match your search
Product Name
Supplier
Description
AddocatLTB is benzylamino-borontrifluoride-complex. Acts as an accelerator for epoxy/hardener-combinations and for the catalytic curing of epoxy resins. Also used for catalytic curing of epoxy... view more
Addolink® 30/10 technical ground is hydroquinone di-(2-hydroxyethyl) ether. Acts as a crosslinking agent for isocyanates crosslinkable polyurethane rubber. It is noted for its high degree of purity... view more
1,1,1-tris-(p-hydroxyphenyl)ethane. Used as a crosslinking agent for the production of branched polycarbonates and suitable for both common production processes - the interfacial and the melt... view more
Addolink®TT is dimeric toluene-2.4-diisocyanate. Acts as a bonding agent to improve the adhesion of fabrics (polyester, polyamide, aramide) to plasticized PVC or rubber. Recommeneded dosage is... view more
Addonyl®8120 is solid blocked diisocyanate. Acts as an activator during the production of Cast Nylon (PA-6 G). Due to the low proportion of the final material, it is mostly dust-free and enables... view more
Applications
Lanxess
Addonyl® TT is dimeric toluene-2.4-diisocyanate. Acts as an activator in cast nylon (PA-6 G) in order to extend the pouring time. Pyrogenous silicic acid (< 1%) is used as a fluxing agent. The... view more
Applications
Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Acts as a plasticizing polymer for improving the resistance of PVC to oil, grease, solvents and... view more
Carbodiimide. Is an effective additive to prevent polymer degradation due to an exposure to humidity and acids. Helps maintain the molar mass and thus, mechanical properties as well as melt strength... view more
StabaxolI Powder is monomeric carbodiimide. Acts as an antihydrolysis agent for polyester-polyurethane elastomers produced by hot casting process. It is normally being dissolved in the polyester... view more
Lanxess
Stabaxol® P is an aromatic polycarbodiimide. Acts as an anti-hydrolysis agent. It is developed for millable urethane rubbers and thermoplastic polyester polyurethanes (TPU) as well as polyester... view more
Uniplex BAP-370 is Tris (tribromoneopentyl) phosphate. Acts as a solid flame retardant that it is melt processable. Based on its high bromine content it imparts efficient flame retardance to a... view more
Uniplex FRP-64 is poly (2,6-Dibromophenylene oxide). Acts as a flame retardant. It exhibits high chemical resistance combined with an excellent light stability. Compatible with thermoplastics such... view more
Uniplex FRP-64 P is poly (2,6-Dibromophenylene oxide). Acts as a solid flame retardant. It exhibits high chemical resistance combined with an excellent light stability. It is de-dusted with a... view more
Uniplex FRX 44-94 is a nitrogen (27%) and phosphorus (15.7%) blend. Acts as a flame retardant. The blend forms an intumescent layer under heat and fire exposure. It offers an excellent UV stability... view more
Uniplex FRX 44-94 S is a nitrogen (27%) and phosphorus (15.7%) blend. Acts as a flame retardant. The blend forms an intumescent layer under heat and fire exposure. It offers an excellent UV... view more
Addolink®THPE is 1,1,1-tris-(p-hydroxyphenyl)ethane. It is used for the production of branched polycarbonates. Branched polycarbonates with a pronounced pseudoplastic behavior can be obtained with... view more
Synthetic iron oxide α - Fe2O3. It is a micronized iron oxide red pigment. Acts as high performance pigments and fulfills the higher requirements necessary in the paint and coating industry. The... view more
Synthetic iron oxide α-Fe2O3. It is a micronized iron oxide red pigment. Acts as high performance pigments. The product displays excellent dispersibility. As a result of the manufacturing process... view more
Synthetic iron oxide α - Fe2O3. It is a micronized iron oxide red pigment. The product displays excellent dispersibility. As a result of the manufacturing process (Laux-process), which includes a... view more
Synthetic iron oxide α - Fe2O3.It is an iron oxide black pigment with high tinting strength. It is delivered as powder. In addition it is also applied in the plastic industry in the field of wood... view more
Synthetic iron oxide α - Fe2O3.It is a bluish iron oxide black pigment with very high tinting strength. It can be used in a wide variety of construction. In addition it is also applied in the... view more
Synthetic mixed iron and manganese oxide (Fe,Mn)2O3. It displays an extreme heat stability. It can be applied for the coloration of a wide variety of construction materials as well as in the... view more
BAYMOD® A 52 by Lanxess is an acrylonitrile butadiene styrene grafted copolymer. It is a highly effective modifier for improving notched impact strength and processability of rigid PVC. BAYMOD® A 52... view more
Applications
Acrylonitrile butadiene styrene graft polymer. Used as a PVC modifier in semi-rigid thermoformable sheeting. Exhibits very good toughness and very good thermoforming properties. Possesses favourable... view more
BAYMOD® L 2450 by Arlanxeo is an ethylene-vinyl acetate copolymer. Suitable for plastic- & rubber polymers and polymer auxiliaries... view more
Mixture of hexamethyoxymethylmelamine ether and filler. Provides good adhesion between rubber and substrate... view more
Hexamethylene tetramine (HMT) with amorphous silica(about 3%)... view more
Mixture of 1/3 rescorinol, 1/3 hexamethoxymethylmelamine and 1/3 silica... view more
Lanxess
Resocinol derivative on filler in ratio 1:1... view more
Synthetic mixed iron and manganese oxide(Fe,Mn)2O3. It displays an extreme heat stability, since it is modified with a certain amount of manganese oxide incorporated into the crystal lattice. The... view more
Synthetic iron oxideFe2O3. It is a black iron oxide pigment with improved heat stability. The product exhibits good dispersibility, even in processes which have short dwell times and relatively low... view more
Synthetic mixed iron and manganese oxide (Fe,Mn)2O3. It is a reddish brown manganese ferrite pigment with improved heat stability. The product exhibits good dispersibility, even in processes which... view more
Synthetic Chromium Oxide Cr2O3. It acts as high performance special pigments. It is a heat stable, micronized chromium oxide green pigment. The product is also used for coloring plastics or... view more
Synthetic iron oxide α-Fe2O3. It is a heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low Copper and Manganese content... view more
Synthetic iron oxide α-Fe2O3. It is a heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and manganese content... view more
Synthetic iron oxide α-Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, bluish iron oxide red pigment. It belongs to the product range of high Performance Pigments. In addition, It is applied in the plastic industry in... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product exhibits good dispersibility, even in processes which have short dwell times and relatively low... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and... view more
Synthetic iron oxide α -Fe2O3. It is a heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and manganese content... view more
Sythetic iron oxide alpha FeOOH modified with Al-compounds. It is an iron oxide yellow pigment with improved heat stability. It achieves its high heat stability through an additional inorganic... view more
Sythetic zinc ferrite ZnFe2O4. It is a heat stable iron oxide yellow pigment. It has greater thermal stability. Maximum temperature stability can vary depending on the system into which the pigment... view more
Sythetic zinc ferrite ZnFe2O4. It has greater thermal stability. Maximum temperature stability can vary depending on the system into which the pigment is incorporated. The pigment belongs to the... view more
Azodicarbonic acid diamide/p-toluene sulphohydrazide preparation. Used for the foaming of rubbers... view more
Applications
Azodicarbonic acid diamide preparation. Used for polymer auxiliaries... view more
Blowing agent. Used as a blowing agent. Requires less time for degassing... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent in low temperature PVC plastisol applications. Offers low temperature expansion. Exhibits increased efficiency and the line speed... view more
Azodicarbonamide preparation. Highly activated ADC formulation with a low decomposition temperature... view more
Sodium bicarbonate preparation. Used in extrusion processes of rigid PVC, where the use of azodicarbonic acid diamide is not possible. Developed for rigid PVC processing but also fits for the... view more
Anthraquinone dyestuff based blue colored pigment. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS/PC blends... view more
Coumarin dyestuff based fluorescent red colored pigment with a yellow cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA and PC... view more
Coumarin dyestuff based fluorescent yellow colored pigment with a green cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PA 6, ABS and ABS/PC blends. For styrene-butadiene... view more
Mixture of dyestuff. It is a red colored pigment with yellow cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA and PET. For styrene-butadiene block copolymer, the use of this dye... view more
Azo dyestuff based red colored pigment with a blue cast. Recommended for transparent and opaque dyeing of PS and PMMA. For styrene-butadiene block copolymer, the use of this dye is not recommended... view more
Azo dyestuff based red colored pigment with a blue cast. Recommended for transparent and opaque dyeing of PS, SAN, PET and PMMA. For styrene-butadiene block copolymer, the use of this dye is not... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent for the production of polymer foam. Offers improved free-flowing property... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent for the production of polymer foam. Offers very good cost/performance ratio. Used for the manufacture of articles which come into... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent for the production of polymer foam... view more
Toluene sulphonyl hydrazide. Used as a blowing agent... view more
Imidacloprid. Highly effective termiticide / insecticide for wood preservatives, wood composites and plastics. Possesses broad spectrum of activity. Outstandingly effective against termites such as... view more
2,2'-dibenzamidodiphenyldisulphide with activating additive and binder... view more
Lanxess
2,2'-dibenzamidodiphenyldisulphide with activating additive and binder... view more
o-tolyl biguanide, coated with mineral oil. Used as vulcanization accelerator for all rubbers with very slow scorch rates and relatively slow cure rates. Offers good mechanical properties and good... view more
Applications
Zinc chloride dibenzothiazyl disulphide compound. Used as curing agent for sulphur cross-linkable polyurethane rubbers... view more
N,N'-diphenyl thiourea. Acts as a vulcanizing accelerator. It causes a very rapid vulcanization in CR. It is also suitable as a secondary accelerator in self-curing CR compounds which contain... view more
Di-ortho-tolylguanidine. Acts as a vulcanizing accelerator. It is a low-dusting and oil-damped powder. It is very easy to incorporate and disperses perfectly. It is an accelerator for all rubbers... view more
Vulcanizing agent for natural and synthetic rubbers. Used for tyres, conveyor belts, retreading material, assembled hoses, etc... view more
Zinc dimethyl dithiocarbamate (ZDMC). Acts as a vulcanizing accelerator. Provides a longer scorch time and a faster total curing time. Also offers very good tensile and resilience properties. It... view more
Zinc dibutyl dithiocarbamate (ZDBC). Acts as a vulcanizing accelerator. Provides a shorter scorch time and a slower total curing time. Also offers very good tensile and resilience properties. It... view more
Ethylene thiourea. Acts as a vulcanizing accelerator. Serves as an activator and secondary accelerator for systems containing little or no sulfur. Causes rapid and scorch-safe vulcanization of... view more
67% zinc dialkyl dithiophosphate bound to 33% silica. Acts as a vulcanizing accelerator. It causes a high degree of crosslinking. The free-flowing powder form of Rhenocure TP/S provides easy dosing... view more
Dimeric toluylene-2,4-diisocyanate. Used as crosslinking agent for isocyanate curable polyurethane rubber... view more
75% zinc dialkyl dithiophosphate bound to 25% high-activity silica. Acts as a vulcanizing accelerator. It is used in conjunction with sulfenamide, thiazole, thiuram, carbamate, and guanidines as a... view more
70 % zinc dialkyl dithiophosphate bound to 30 % high-activity silica. Acts as a vulcanization accelerator. It is free-flowing and non-staining. Highly soluble and disperses very well in all the... view more
Zinc-N-pentamethylene dithiocarbamate. Acts as a vulcanization accelerator. Exhibits reduced cure rates and improved processing safety. Offers good tensile strength and aging resistance. Used in... view more
Combination of activating substances based on urea and surface-active agents, bound to highly reinforcing silica. Used as curing activator and promotor for the rubber articles of all kinds, which... view more
Fine particle sized magnesium oxide. Used as curing activator and acid acceptor particularly suitable for polychloroprene rubber (CR). Offers improved ageing properties of the vulcanizates... view more
Active magnesium oxide. Used as curing activator and acid acceptor particularly suitable for polychloroprene rubber (CR). Prevents scorching. Offers improved ageing properties... view more
Combination of activating substances based on amines, bound to highly reinforcing silica. Used as vulcanization activator and promoter for reinforcing fillers and in fast-curing mouldings, e.g... view more
70 % 1,4-butandioldimethacrylate (BDMA) and 30 % silica. Acts as a vulcanization activator. Provides higher degree of polymer crosslinking. Shows partly increased hardness, higher moduli... view more
Specially treated, finely divided calcium hydroxide. Used as crosslinking activator for fluoro-elastomers and in technical rubber articles, such as seals of all kinds. Offers very good storage... view more
Highly active magnesium oxide. Used as vulcanization activator and acid acceptor for technical mouldings and injection mouldings, rubber curing bags for tyres, roofing sheets, etc. Improves the... view more
Combination of diphenylamine derivative and silica filler. Used as antioxidant in bicycle tyres, inner tubes, sponge rubber, footwear sole(particularly expanded rubber soles). Prevents damage by... view more
Rhenofit® EDMA/S by Rhein Chemie (Lanxess Group) is 70% ethylene glycol dimethacrylate (EDMA) and 30 % silica. Acts as an activator for peroxide vulcanization... view more
Phenyl-a-naphthylamine. Used as an antioxidant for natural and synthetic rubber particularly for articles subjected to heavy dynamic stressing, e.g. tyres, conveyor belts, transmission belts and... view more
70 % triallyl cyanurate bound to 30 % silica. Used as vulcanization activator. Offers higher hardness, higher moduli and tensile strengths as well as improved abrasion resistance. Exhibits no real... view more
70 % trimethylolpropane trimethacrylate and 30 % silica. Acts as a vulcanization activator. Provides higher degree of polymer crosslinking. Shows increased hardness, higher moduli, outstanding... view more
Organic zinc salt. Used as blowing agent for cellular rubber and plastic articles of all kind... view more
Applications
Vegetable oil cross-linked without sulfur and chlorine. Used as a processing promoter for natural and synthetic rubber compounds. Provides good dimensional stability and very good processability... view more
Refined rape-seed oil cross-linked with sulphur and blended with mineral oil and inorganic stabilizers. Used as a processing promoter cold-cured goods such as light-colored calendered sheeting and... view more
Lanxess
Phenol formaldehyde resin with hexamethylene tetramine. Acts as a hardening agent. Exhibits a reinforcing effect. The deformation characteristics such as shore hardness and modulus are significantly... view more
70% aromatic polyether (Vulkanol® FH) and 30% silica filler. Acts as a plasticizer. Exhibits good dispersing effect on carbon blacks and light colored reinforcing fillers. It increases the building... view more
Lanxess
1,6-bis(N,N-dibenzylthiocarbamoyldithio)-hexane. Used as a crosslinker for the production of highly reversion-stable vulcanizates of NR, IR, SBR and BR and their blends. Recommended in combination... view more
Vulkacit® CZ/C by Lanxess is a N-cyclohexyl-2-benzothiazolesulfenamide(CBS). Acts as a vulcanization accelerator. It is a low dust white to grey colored powder. It has a shelf life of 1 year... view more
Vulkacit® DM/C by Lanxess is a di(benzothiazol-2-yl)disulfide. Acts as a vulcanization accelerator. It is a low dust, cream colored powder... view more
Vulkacit® LDA by Lanxess is a zinc diethyldithiocarbamate. Acts as a vulcanization accelerator. Used in the manufacturing of rubber, latex, tires and shoe industry... view more
Vulkacit® Mercapto/C by Lanxess is a 2-mercaptobenzothiazole. Used as a vulcanization accelerator. It is a low dust yellowish white colored powder... view more
Vulkacit® P extra N by Lanxess is a zinc ethyl phenyl dithiocarbamate. Acts as a vulcanization accelerator. Used in the manufacture of plastic and rubber polymers... view more
Vulkacit® Thiuram/C by Lanxess is a tetramethylthiuram disulfide. Acts as a vulcanizing agent. It is slightly soluble in water. Used in the manufacture of plastics... view more
Vulkacit® ZM by Lanxess is a zinc-2-mercaptobenzothiazole. Acts as a vulcanization accelerator. Used in the manufacture of plastic and rubber polymers... view more
Lanxess
1,3-diphenylguanidine. Used as a vulcanization accelerator... view more
1,3-diphenylguanidine. Used as a vulcanization accelerator... view more
Lanxess
Dimethyl diphenyl thiuram disulphide. Used as a vulcanization accelerator... view more
Zinc dibenzyl dithiocarbamate. Used as a vulcanization accelerator... view more
Zinc dibenzyl dithiocarbamate. Used as a vulcanization accelerator... view more
Vulkalent® E/C by Lanxess is a N-phenyl-N-(trichloromethylsulphenyl)-benzene sulphonamide. Acts as a vulcanizing retarder for polymers. Improves the processing safety of compounds by prolonging flow... view more
Vulkalent® G by Lanxess is a N-cyclohexylthiophthalimide. Acts as a vulcanizing retarder for polymers. Improves the processing safety of compounds by prolonging flow times at cure temperatures... view more
Phthalic anhydride. Used as vulcanization agent. Improves the processing safety of compounds by prolonging flow times at cure temperatures. Increases scorch and flow times of sulfur-cured diene... view more
Vulkanox® SKF is a sterically hindered polynuclear phenol. It is used in the manufacturing of rubber, latex and acts as an antioxidant for polymers... view more
Vulkanox® ZMB2/C-5 is an antioxidant for polymers and used in the manufacturing of rubber... view more
Mixture of alkyl-and aralkyl-subsituted phenols... view more
Precipitated sodium aluminium silicate. Offers improved resistance to hot air aging and abrasion. Exhibits improved bonding of rubber to fabric or to steel cord... view more
Lanxess
Precipitated silica with a medium reinforcing effect. Provides improved resistance to hot air aging and abrasion. Exhibits improved bonding of rubber to fabric or to steel cord... view more
Lanxess
Reinforcing precipitated silica. Used as a filler. Offers improved resistance to hot air aging and abrasion. Exhibits improved bonding of rubber to fabric or to steel cord. Provides improved... view more
Lanxess
Reinforcing precipitated silica. Provides improved resistance to hot air aging and abrasion. Exhibits improved bonding of rubber to fabric or to steel cord... view more
Transparent Zinc Oxide. Used as vulcanization activator, accelerator and filler. Applicable in automotive industry, manufacturing of rubber, latex, sports and leisure industry... view more
Precipitated zinc oxide. Used as a cross linking agent, vulcanization activator and filler. Provides very good fatigue resistance and high resilience in dynamically stressed goods like springs or... view more
Benzylamino-borontrifluoride-complex. Used as an accelerator for epoxy/hardener-combinations and for the catalytic curing of epoxy resins. Has very good hydrolysis stability as well as good... view more
Vulcanizing agent for natural and synthetic rubbers. Used for tyres, conveyor belts, retreading material, assembled hoses, etc... view more
Tetraisobutyl thiuram disulfide. Acts as a vulcanizing accelerator. Also acts as a curing agent for vulcanization without free-sulfur or low-sulfur crosslinking systems. It is used as a primary... view more
Combination of inorganic fillers, salts of fatty acids and surface active substances. Used as release agent to prevent the sticking of rubber pellets. Provides high abrasion resistance... view more
Applications
Active magnesium oxide. Used as curing activator and acid acceptor particularly suitable for polychloroprene rubber (CR). Prevents scorching. Offers improved ageing properties... view more
Sodium carbonate, ground. Used as vulcanizing agent and acid acceptor for CO, ECO and HNBR. Offers improved aerobic and anaerobic ageing properties... view more
Crosslinking activator for acrylate rubber. Used for oil-resistant seals based on ACM for use in vehicles and engineering... view more
Protect coatings from Microbial Contamination
Back to Top