OK
The material selection platform
Polymer Additives
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
72 products match your search
Product Name
Supplier
Description
Blend of bisphenol A glycidyl methacrylate and triethylene glycol dimethacrylate (70:30). Complies with TSCA (Toxic Substance Control Act List)... view more
Urethane dimethacrylate extended with PEG (polyethylene glycol) 400 (60-100 wt./wt. %). It is a clear pale yellow liquid. Exhibits low viscosity and low color. Cures to form a flexible polymer. Its... view more
Urethane dimethacrylate (> 90 wt./ wt.%). It is a clear pale yellow liquid having low viscosity. Slightly soluble in water. Cures to form a light-colored, bisphenol A-free, hard, glassy surface... view more
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid at room temperature. Forms a soft, yet tough polymer. Complies with TSCA (Toxic Substance Control Act List), 21 CFR of FDA (Food... view more
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits high flexibility on curing. Forms homopolymer which exhibits unique ability to re-adhere to itself at lower tensile... view more
Urethane tetramethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses increased cross-linking capacity. Forms polymers with high Shore D hardness... view more
Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses the ability to re-adhere to itself after breaking. Provides improved flexibility... view more
Urethane dimethacrylate (80-100 wt./wt. %). It is a clear pale yellow liquid. Provides very low shrinkage values upon cure as well as good conversion and enhanced toughness. Exhibits high viscosity... view more
Urethane acrylate (70-100 wt. /wt. %). It is a clear viscous liquid. Possesses high rate of conversion with low average shrinkage stress. Forms a tough polymer. Complies with TSCA (Toxic Substance... view more
Urethane acrylate (70-100 wt. /wt. %). It is a very soft, rubber-like, clear viscous liquid. Possesses very high conversion and very low shrinkage. Complies with TSCA (Toxic Substance Control Act... view more
Esstech
Hydrophilic fumed silica. It provides anti-settling properties in pigmented systems, better anti caking control and can be used for both rheology and gloss control. Used in adhesives gel coats and... view more
Esstech
Fluorescent whitening agent. It is a highly efficient heat resistant, monomer soluble, chemically stable fluorescent whitener that provides brighter looking colors in a variety of thermoplastics... view more
Esstech
Hydroxyphenol benzotriazole ultraviolet light absorber (UVA). It provides strong absorption in the 300-400 nm region to a variety of polymers including epoxies, polyesters, urethanes as well as... view more
2-Hydroxyethylmethacrylate acid phosphate (HEMA phosphate). It is a liquid adhesive system that bonds to and interacts with calcium-containing substrates. Also commonly known as ethylene glycol... view more
1, 3 - Glycerol dimethacrylate/ succinate adduct. It is a yellow to milky white liquid with mild pleasant odor. Complies with FDA as stated in 21 CFR and 40 CFR 720.3(e) (6). Enables use in small... view more
2-Hydroxyethyl methacrylate/ succinate (methacryloyloxyethyl succinate). It is a yellow to milky white liquid with mild pleasant odor. Offers reactivity of succinic acid along with the adhesive... view more
Methacroyloxyethyl phthalate (HEMA phthalate). It is an aromatic, carboxylic acid-containing monomer which lends itself to many adhesive applications where functionality of a methacrylate is needed... view more
Solution of bis (glyceryl dimethacrylate) pyromellitate in triethyleneglycol dimethcrylate. It is an adhesive monomer. By dissolving PMGDM adduct in triethyleneglycol dimethcrylate rather than... view more
PMGDM [Bis (glyceryl dimethacrylate) pyromellitate] 36% (w/w) solution in acetone (stabilized). It contains four methacrylate groups and two carboxylic acid groups which can bond with various... view more
PMGDM / {bis (glyceryl dimethacrylate)} pyromellitate/ pyromellitic dianhydride glycerol dimethacrylate adduct. It is an adhesive monomer which is stabilized with 50% acetone. Contains four... view more
Methacroyloxyethyl maleate (HEMA maleate). It is a carboxylic acid-containing methacrylate that can function as an alternative to PMDM. Complies with TSCA (Toxic Substances Control Act), DSL... view more
N-(2-hydroxy-3-((2-methyl-1-oxo-2-propenyl) oxy) propyl)-N-tolyl glycine [sodium salt].It is a surface active monomer (NTG-GMA). Bridges the gap between hydrophobic and hydrophilic substrates... view more
Magnesium salt of surface active monomer (NTG-GMA). It is an adhesion promoting monomer which has two NTG-GMA units. Also functions as a co-initiator due to its tertiary aromatic amine group. Offers... view more
1, 6- Hexanediol dimethacrylate. It is a hydrophobic difunctional monomer which can also assist in cross-linking. Complies with Toxic Substance Control Act List (TSCA), Food and Drug... view more
1, 6- Hexanediol dimethacrylate. It is a hydrophobic difunctional monomer which can also assist in cross-linking. Complies with Toxic Substance Control Act List (TSCA), Food and Drug... view more
1, 6- Hexanediol dimethacrylate. It is a hydrophobic difunctional monomer which can also assist in cross-linking. Complies with Toxic Substance Control Act List (TSCA), Food and Drug... view more
Lauryl methacrylate. It is a monofunctional methacrylate with a long chain hydrophobic pendant group. Improves flexibility, water resistance, adhesion and impact resistance in a large range of... view more
Poly (ethylene glycol) (400) dimethacrylate (> 90 % wt. / wt.). It is a difunctional monomer. The additional ethylene glycol molecules increases its reactivity. Also known as PEG400DMA. Complies... view more
Isobornyl methacrylate. The cyclic group of isobornyl methacrylate allows it to react in free radical polymerization while also acting as an excellent diluent. Complies with TSCA (Toxic Substance... view more
Poly (propylene glycol) monomethacrylate. It is a monofunctional monomer that is an ideal diluent because of its low viscosity and low color. Complies with TSCA (Toxic Substance Control Act List)... view more
Trifluoroethyl methacrylate. It has high purity and low refractive index. Used in photo-crosslinkable compositions. Complies with TSCA (Toxic Substance Control Act List) and EINECS. Also complies... view more
1, 12-Dodecanediol dimethacrylate. It has a hydrophobic backbone that increases its molecular mobility. Provides fast cure, flexibility and improved surface characteristics to polymer matrix... view more
1, 12-Dodecanediol dimethacrylate. It has a hydrophobic backbone that increases its molecular mobility. Provides fast cure, flexibility and improved surface characteristics to polymer matrix... view more
Lauryl acrylate. It is a low viscosity monofunctional monomer that can increase hydrophobicity of formulations due to its aliphatic tail. Improves flexibility and chemical resistance of various... view more
Ethoxylated bis phenol A dimethacrylate. It has 30 units of ethoxylation and high degree of conversion. Offers high levels of water sorption. Can be blended with bis GMA (bisphenol A glycidyl... view more
Ethoxylated bis phenol A dimethacrylate (> 90 % wt./ wt.). It has 8 units of ethoxylation. Increasing the ethoxylated chain length increases the mobility of the molecule and therefore its reactivity... view more
Ethoxylated bis phenol A dimethacrylate (> 90 % wt. / wt.). It has 10 units of ethoxylation. Polymerization of this material results in a rigid polymer with high degree of conversion. Complies with... view more
Ethoxylated bis phenol A dimethacrylate. It has 6 units of ethoxylation. Increasing the ethoxylated chain length increases the mobility of the molecule and therefore its reactivity and degree of... view more
Aliphatic urethane triacrylate. It is highly reactive with an excellent cure speed. Cures to form a flexible polymer. Complies with TSCA (Toxic Substance Control Act List), Food and Drug... view more
1, 3 - Glycerol dimethacrylate/ maleate adduct. It is a yellow to milky white liquid with mild pleasant odor. Possesses capability of bridging the gap between hydrophilic and hydrophobic substrates... view more
1, 3 – Glycerol dimethacrylate. Complies with TSCA. Also complies with the appropriate sections of the Food and Drug Administration's 21 CFR. The major component of this product is listed on the... view more
Hydroxyethyl methacrylate. It contains a secondary alcohol group and is often considered to have less allergic reaction potential than other methacrylates. Complies with TSCA (Toxic Substance... view more
Acetoacetoxyethyl methacrylate. It is a low viscosity, monofunctional methacrylate. The two ketone groups in its backbone can chelate various cations allowing for adhesion between methacrylate... view more
Pyromellitic dianhydride glycerol dimethacrylate (PMGDM)/ bis (glyceryl dimethacrylate) pyromellitate/ pyromellitic dianhydride glycerol dimethacrylate adduct. It is an adhesive monomer which is... view more
2-Methoxyethoxyethyl methacrylate. Complies with TSCA (Toxic Substance Control Act List), EINECS and ELINCS. The major component of the product is listed on the NDSL. All other components are on the... view more
Blend of urethane dimethacrylate (> 90wt. / wt. %) and IPDI (isophorone diisocyanate). It exhibits higher viscosity than X-850-0000 (urethane dimethacrylate). Shows lower polymerization shrinkage on... view more
Urethane dimethacrylate (80-100% wt. / wt.). Complies with Food and Drug Administration's 21 CFR, TSCA (Toxic Substance Control Act List) and EINECS. The main component of this product is listed on... view more
Bis (2-methacryloyloxyethyl) pyromellitate [pyromellitic dimethacrylate ]. Possesses the ability to bond various substrates when used alone or in conjunction with our sodium or magnesium (NTG-GMA)... view more
Bisphenol A epoxy methacrylate (100% wt. / wt.). It possesses fast curing speed that forms a stiff polymer with above average hardness. Complies with Food and Drug Administration's 21 CFR, TSCA... view more
Ethylene glycol dimethacrylate (60-100% wt. / wt.). It is a difunctional monomer acting as a cross-linking agent between polymer chains. Has similar reactivity to methyl methacrylate with low water... view more
Ethylene glycol dimethacrylate (60-100% wt. / wt.). It is a difunctional monomer acting as a cross-linking agent between polymer chains. Has similar reactivity to methyl methacrylate with low water... view more
Triethyleneglycol dimethacrylate. It is a difunctional monomer that has ideal water absorptivity and stability properties. Complies with Toxic Substance Control Act List (TSCA), Food and Drug... view more
Triethyleneglycol dimethacrylate. It is a difunctional monomer that has ideal water absorptivity and stability properties. Complies with Toxic Substance Control Act List (TSCA), Food and Drug... view more
Triethyleneglycol dimethacrylate. It is a difunctional monomer that has ideal water absorptivity and stability properties. Complies with Toxic Substance Control Act List (TSCA), Food and Drug... view more
Triethyleneglycol dimethacrylate. It is a difunctional monomer that has ideal water absorptivity and stability properties. Complies with Toxic Substance Control Act List (TSCA), Food and Drug... view more
Tetraethylene glycol dimethacrylate (TEGDMA). The added ethylene oxide unit to this product increases its reactivity and water absorptivity. Complies with Toxic Substance Control Act List (TSCA)... view more
Trimethylolpropane trimethacrylate. It is a unique trifunctional monomer because of its low volatility and fast cure response. Exhibits chemical- and wear resistance. Suitable for composite... view more
Trimethylolpropane trimethacrylate. It is a unique trifunctional monomer because of its low volatility and fast cure response. Exhibits chemical- and wear resistance. Hence, ideal for various... view more
Trimethylolpropane trimethacrylate. It is a unique trifunctional monomer because of its low volatility and fast cure response. Exhibits chemical- and wear resistance. Hence, ideal for various... view more
Ethylene glycol dimethacrylate (60-100% wt. / wt.). It is a difunctional monomer acting as a cross-linking agent between polymer chains. Has similar reactivity to methyl methacrylate with low water... view more
Ethylene glycol dimethacrylate (60-100% wt. / wt.). It is a difunctional monomer acting as a cross-linking agent between polymer chains. Has similar reactivity to methyl methacrylate with low water... view more
Bisphenol A glycidyl methacrylate (> 85 wt. / wt. %). It is a light colored, high viscosity resin. Complies with Food and Drug Administration's 21 CFR, TSCA (Toxic Substance Control Act List)... view more
Blend of bis GMA (bisphenol A glycidyl methacrylate) and TEGDMA (triethylene glycol dimethacrylate) in the ratio of 50:50. It complies with TSCA (Toxic Substance Control Act List), Food and Drug... view more
Blend of bis GMA (bisphenol A glycidyl methacrylate) and TEGDMA (triethylene glycol dimethacrylate) in the ratio of 80:20. It complies with TSCA (Toxic Substance Control Act List), Food and Drug... view more
Diethylene glycol dimethacrylate (> 90 % wt. / wt.). It is a hydrophilic, cross-linking monomer. Complies with Toxic Substance Control Act List (TSCA), European Inventory of Existing Commercial... view more
Tetrahydrofurfuryl methacrylate. It is a polar monomethacrylate containing a five-membered heterocyclic group. Complies with TSCA (Toxic Substance Control Act List), EINECS and DSL. Also complies... view more
Tetrahydrofurfuryl methacrylate. It is a polar monomethacrylate containing a five-membered heterocyclic group. Complies with TSCA (Toxic Substance Control Act List), EINECS and DSL. Also complies... view more
2-Hydroxyethyl methacrylate (>90 %wt. / wt.). It is high purity methacrylate monomer. Used in light-curing systems. Complies with TSCA (Toxic Substance Control Act List), Food and Drug... view more
2-Hydroxyethyl methacrylate. Its purity level makes it cost efficient. Complies with TSCA (Toxic Substance Control Act List), Food and Drug Administration’s 21 CFR, DSL, ELINCS and EINECS... view more
2-Hydroxyethyl methacrylate. It possesses adhesive qualities and multiple features of other hydroxyethyl methacrylates along with additional stability. Complies with TSCA (Toxic Substance Control... view more
Ethoxyethyl methacrylate. It has high purity. Complies with TSCA (Toxic Substance Control Act List) and EINECS. Also complies with the appropriate sections of the Food and Drug Administration's 21... view more
Ethoxylated bis phenol A dimethacrylate. It has 2 to 4 units of ethoxylation. Shows low level of water sorption and a high polymerization rate. Often used in blends with triethylene glycol... view more
Monomers for functional Polymers
Channel Alerts

Receive weekly digests on hot topics

Back to Top