20% organic antiblock additive based on polypropylene copolymer. Recommended for metallizable films and cigarette films. The dosage rate is 1.0-2.0%... view more

20% organic antiblock additive based on polypropylene copolymer. Recommended for metallizable films and cigarette films. The dosage rate is 1.0-2.0%... view more

40% sodium metabisulfite based on LDPE. Acts as an anti-fogging agent. Recommended for agricultural films. The dosage rate is 2.0-5.0%... view more

25% SML based on LDPE. Acts as an anti-fogging agent. Recommended for polyethylene food wrap films. The dosage rate is 2.0-5.0%... view more

70% additive based on LDPE. Acts as an anti-fogging agent. Recommended for cold or hot fog PE films. The dosage rate is 1.0-1.5%... view more

60% anti-fogging additive based on GPPS polymer. It is approved for food contact. The dosage rate is 3.0%... view more

48-52% anti-fogging additive based on SBC (styrene-butadiene block copolymer). Can be incorporated by using normal dosing equipment or by adding it to a dry blend with virgin polymer. Recommended... view more

60% anti-fogging additive based on polypropylene homopolymer. Recommended for cold or hot food packaging films. The dosage rate is 1.5-2.0%... view more

50% anti-fogging agent based in SBC. Recommended for cold and hot fog food packaging applications. The dosage rate is 3.0-5.0%... view more

75% anti-fogging additive based on polypropylene homopolymer. Recommended for food packaging BOPP film. The recommended level of addition is between 0.8 to 2.0 %... view more

60% additive based on LLDPE. Acts as an antioxidant. Recommended for active food packaging films for cereals. The dosage rate is 0.2-0.4%... view more

50% flame retardant additive based on HIPS polymer. It is halogen free. The dosage rate is 15-25%... view more

61% flame retardant as well as antidripping additive based on polycarbonate carrier resin. It is bromine free. The dosage rate is 13-15%... view more

50% flame retardant additive based on polycarbonate carrier resin. It is halogen free. Recommended for transparent PC sheets. The dosage rate is 15-20%... view more

60% antistatic masterbatch based on polypropylene homopolymer. Also acts as a release agent in molding application. Recommended for standard packaging films. The dosage rate is 0.5-0.7%... view more

50% glycerol monostearate based masterbatch in LDPE carrier resin. Acts as a mold release agent. Exhibits fast migration. The recommended dosage rate is 0.5-1.0%... view more

40% additive based masterbatch in GPPS carrier resin. Acts as an antistatic agent. It is amine or amide free. Recommended for foams, films and molded parts. The dosage rate is 2.0-3.0%... view more

70% glycerol monostearate based masterbatch in EVA carrier resin. Acts as a mold release agent. Recommended for PE foams. The dosage rate is 0.4-0.8%... view more

40% anti-fogging additive based on polypropylene homopolymer. Recommended for cold or hot food packaging films. The dosage rate is 2.5-3.5%... view more

60% anti-fogging additive based on polypropylene copolymer. Recommended for cold fog food packaging films. The dosage rate is 1.5-3.5%... view more

65% additive based on LDPE. Acts as an anti-fogging agent. Recommended for cold fog food packaging films. The dosage rate is 0.7-0.9%... view more

50% additive based cell stabilizing masterbatch in LDPE carrier rines. Acts as a cell stabilizer. Recommended for LDPE foams. The dosage rate is 2.0-3.0%... view more

Amine or amide free additive based on LLDPE carrier resin. Acts as an antistatic agent. Can be incorporated by using gravimetric dosing equipment or by adding it to a dry blend with virgin polymer... view more

50% additive based on GPPS. Acts as an antistatic agent. It is amine or amide free. The dosage rate is 4.0-5.0%... view more

58-62% anti-fogging additive based in EVA carrier resin. For better and long term effect, it should be used in anti-fog layer as well as core layer in case of multi layer films. Recommended for... view more

70% additive based on LLDPE. Acts as an antistatic agent. Recommended for food packaging films and co-extruded film for lamination. The dosage rate is 0.2-0.5%... view more

50% antistatic agent based in PA6. Recommended for fibers. Suitable for molding and compounding. Approved for food contact. The dosage rate is 3.0-5.0%... view more

60% permanent antistatic agent based in PET. Recommended for PET fibers. The dosage rate is 2.0-5.0%... view more

50% antistatic masterbatch based in PA6. Recommended for carpet fibers. The dosage rate is 3.0-5.0%... view more

60% additive based on LDPE. Acts as an antistatic agent. Recommended for films and molded parts. The dosage rate is 0.3-0.5%... view more

50% antistatic masterbatch based on GPPS. Recommended for non food application. The dosage rate is 2.0-3.0%... view more

65% antistatic as well as slip masterbatch based on polypropylene homopolymer. Recommended for BOPP films. The dosage rate is 0.5-0.8%... view more

75% antistatic masterbatch based on polypropylene homopolymer. Recommended for white or opaque films. The dosage rate is 0.2-0.5%... view more

50% stearamide based additive masterbatch containing the effective substance in GPPS carrier resin. Acts as an antislip as well as a mold release agent. Recommended for films and sheets. The dosage... view more

48-52% of refined stearamide based additive masterbatch containing the effective substance in EVA carrier resin. Acts as release agent, antiblocking agent and cell stabilizer. Can be incorporated... view more

73-77% ethoxylated tallow amine based on HDPE carrier resin. Acts as an antistatic agent. Can be incorporated using normal dosing equipment or by adding it to a dry blend with virgin polymer... view more

75% antistatic masterbatch based on polypropylene homopolymer. Recommended for standard packaging films. The dosage rate is 0.2-0.5%... view more

75% antistatic masterbatch based on polypropylene homopolymer. It is vegetable based. Recommended for BOPP or CPP films. The dosage rate is 0.2-0.4%... view more

75% antistatic additive based on polypropylene homopolymer. Recommended for BOPP films. The dosage rate is 0.2-0.9%... view more

65% antistatic or slip additive based on polypropylene homopolymer. Recommended for print lamination films. The dosage rate is 0.8-1.2%... view more

65% antistatic or slip additive based on polypropylene homopolymer. Recommended for heat sealable films and cigarette films. The dosage rate is 0.8-1.5%... view more

40% slip additive based on polypropylene homopolymer. Recommended for standard packaging films. The dosage rate is 0.5-0.7%... view more

60% softening agent based on polypropylene homopolymer. Recommended for fibers. The dosage rate is 0.3-0.5%... view more

40% slip additive or release agent based on polypropylene copolymer. Recommended for standard packaging films. The dosage rate is 0.5-1.0%... view more

40% additive based on LDPE. Acts as a slip agent. Recommended for PE films. The dosage rate is 0.2-0.3%... view more

20% additive based on LDPE carrier resin. Acts as a mold release agent. Recommended for complex molded parts. Compatible with thermoplastic polyolefins (TPO). The dosage rate is 1.5-2.0%... view more

38-42% refined erucamide based on GPPS polymer. Acts as a slip agent. Can be incorporated using normal dosing equipment or by adding it to a dry blend with virgin polymer. Recommended for films and... view more

50% additive based on PC. Acts as a release agent as well as a lubricant. Recommended for transparent parts. The dosage rate is 1.0-1.5%... view more

60% additive based on PET. Acts as a release agent as well as a lubricant. Recommended for transparent parts. The dosage rate is 0.7-1.5%... view more

28-32 wt.% polydimethylsiloxane based on PP copolymer carrier resin. Acts as a lubricant as well as a release agent. Can be incorporated by using gravimetric dosing equipment or by adding it to a... view more

58-62 wt.% polydimethylsiloxane based on LDPE carrier resin. Acts as a lubricant. Addition levels at 0.1 – 0.3% provides release effects in case of injection molding. Higher levels at about 1-1.5%... view more

63-67 wt.% polydimethylsiloxane based on PP copolymer carrier resin. Acts as a lubricant as well as a release agent. Can be incorporated by using gravimetric dosing equipment or by adding it to a... view more

50% silicone oil based on polypropylene homopolymer. Acts as a mold release agent. The dosage rate is 0.2-0.4%... view more

48-52 wt.% polydimethylsiloxane based on GPPS polymer. Acts as a mold release agent as well as a lubricant. It can be incorporated by using gravimetric dosing equipment or by adding it to a dry... view more

50% silicone oil based in PA6. Acts as a release agent as well as a lubricant. The dosage rate is 0.5-2.0%... view more

50% silicone oil based on PC. Acts as a release agent as well as a lubricant. Recommended for molded parts and compounds. The dosage rate is 0.2-1.5%... view more

50% silicone oil based on PET. Acts as a release agent as well as a lubricant. Recommended for molded parts and compounds. The dosage rate is 0.5-2.0%... view more

50% silicone oil based on PET. Acts as a release agent as well as a lubricant. Recommended for molded parts and compounds. The dosage rate is 0.5-2.0%... view more

50% UMHW silicone gum in PP homopolymer. Acts as a lubricant. Recommended for cigarette films. The dosage rate is 1.0-2.0%... view more

50% UMHW silicone gum in PP homopolymer. Acts as a lubricant. Recommended for cigarette films. The dosage rate is 1.0-2.0%... view more

50% silicone gum based in HDPE. Acts as a lubricant. Recommended for pipes and molded parts. The dosage rate is 1-2%... view more

60% additive based on PET. Acts as a release agent as well as a lubricant. Recommended for transparent parts. The dosage rate is 0.7-1.5%... view more

50% additive based on LDPE. Acts as an UV light stabilizer. Recommended for PE raffia. The dosage rate is 0.5-1.0%... view more

65% foaming agent based on polypropylene copolymer. It is water-based. Recommended for thermoplastic vulcanizates(TPV). The dosage rate is 1.0-3.0%... view more