OK
The material selection platform
Polymer Additives
The material selection platform
Polymer Additives
by SpecialChem
Share Feedback
 
Save
Cette page a bien été ajoutée à vos favoris
View all pages saved
CONTINUE BROWSING
REFINE YOUR SEARCH
( active filters)
860 products match your search
Detailed List
Product Name
Supplier
Description
1,2,4-Trivinyl cyclohexane
Evonik
1,2,4-Trivinyl cyclohexane by Evonik acts as a crosslinker. Designed for polyolefins (PE and PP), as well as a number of other polymers. Complies with EINECS 220-668-9 , REACH and TSCA. As a... view more
Applications
1,2,6-Hexanetriol
Evonik
1,2,6-Hexanetriol by Evonik acts as a crosslinker. It is characterized by physio-chemical as well as the primary/secondary alcohol functions. Used in plastics applications as a solvent. It is listed... view more
Applications
1,3-Phenylene-bis-oxazoline
Evonik
1,3-Phenylene-bis-oxazoline by Evonik acts as a crosslinker, modifier and stabilizer. It also functions as a chain extender. It is compatible with polyamide, polyester, co-polyester, both saturated & unsaturated... view more
Applications
1,7-Octadiene
Evonik
1,7-Octadiene by Evonik acts as a crosslinker for polyolefins. Provides derivatization and polymerization in plastics. Suitable for use in pulp, paper & packaging, electronics and telecommunication... view more
Applications
1,9-Decadiene
Evonik
1,9-Decadiene by Evonik acts as a crosslinker. Suggested for polyolefins (polybutylene, PE- HDPE, LDPE, LLDPE, and PP), as well as polymers like polysiloxane, NBR, EPDM, IR, NR and styrenic (PS)... view more
Applications
3,3',4,4'-Benzophenonetetracarboxylic dianhydride
Evonik
3,3',4,4'-Benzophenonetetracarboxylic dianhydride by Evonik acts as a crosslinker. Suggested for polymerization reactions. Compatible with polyimide and epoxy resins. 3,3',4,4'-Benzophenonetetracarboxylic dianhydride complies with REACH regulation... view more
Applications
4-Acetylamino-2,2,6,6-tetramethylpiperidine-N-oxyl
Evonik
4-Acetylamino-2,2,6,6-tetramethylpiperidine-N-oxyl by Evonik acts as an anti-fouling agent and stabilizer. It is used in plastics as a polymerization control agent. It is a suitable catalyst for the oxidation of primary and secondary... view more
Applications
5-Hexen-1-ol
Evonik
5-Hexen-1-ol by Evonik acts as a crosslinker, modifier and polymerization agent for plastics. Suitable for polyolefins (polybutylene, PE- HDPE, LDPE and LLDPE) and polyester (co-polyester... view more
Applications
ACCUREL® AB101
Evonik
ACCUREL® AB101 by Evonik is an anti-blocking agent based on polypropylene copolymer. Used in metallizable films and cigarette films. Recommended dosage level of ACCUREL® AB101 is 1.0-2.0%... view more
Applications
ACCUREL® AB103
Evonik
ACCUREL® AB103 by Evonik is an anti-blocking aid based on polypropylene copolymer. Designed for metallizable films and cigarette films. ACCUREL® AB103 is recommended at a dosage level of 1.0-2.0%... view more
Applications
ACCUREL® AF401
Evonik
ACCUREL® AF401 by Evonik acts as an anti-fogging masterbatch. Designed for LDPE-based agricultural films. It is recommended at a dosage rate of 2.0-5.0 %... view more
Applications
ACCUREL® AF403
Evonik
ACCUREL® AF403 by Evonik acts as an anti-fogging agent based on LDPE. Designed for polyethylene food wrap films. It is recommended at a dosage level of 2.0-5.0%... view more
Applications
ACCUREL® AF421
Evonik
ACCUREL® AF421 by Evonik is an anti-fogging agent by Evonik. It is based on LDPE. Used in cold or hot fog PE films. Recommended dosage level is 1.0-1.5%... view more
Applications
ACCUREL® AF425
Evonik
ACCUREL® AF425 by Evonik is 60% anti-fogging agent based on GPPS polymer. It is approved for food contact applications. ACCUREL® AF425 is recommended at a dosage level of 3.0%... view more
Applications
ACCUREL® AF427
Evonik
ACCUREL® AF427 by Evonik acts as an anti-fogging agent based on styrene-butadiene block copolymer. It can be incorporated by using normal dosing equipment or by adding it to a dry blend with virgin... view more
Applications
ACCUREL® AF431
Evonik
ACCUREL® AF431 by Evonik is an anti-fogging agent by Evonik. It is based on polypropylene homopolymer. It is recommended at a dosage level of 1.5-2.0 %. ACCUREL® AF431 is designed for cold or hot food... view more
Applications
ACCUREL® AF450
Evonik
ACCUREL® AF450 by Evonik is a cold/ hot antifog masterbatch for films and sheets based on styrene-butadiene copolymer. It can be incorporated at a dosage of 3-5 % using gravimetric or volumetric... view more
Applications
ACCUREL® AF701
Evonik
ACCUREL® AF701 by Evonik acts as a cold and hot anti-fog agent. Applicable for CPP/BOPP films with excellent long-term antistatic properties and anti-block performance. Exhibits high thermal... view more
Applications
ACCUREL® AO3002
Evonik
ACCUREL® AO3002 by Evonik is LLDPE-based antioxidant. Designed for active food packaging films for cereals. ACCUREL® AO3002 is recommended at a dosage level of 0.2-0.4 %... view more
Applications
ACCUREL® FR504
Evonik
ACCUREL® FR504 by Evonik is a halogen-free, flame retardant agent. Exhibits high concentrate for extruded or injection molded components and profiles made from styrenic resins and compounds. It is... view more
Applications
ACCUREL® FR512
Evonik
ACCUREL® FR512 by Evonik is 61% flame retardant as well as anti-dripping by Evonik. It is a bromine-free masterbatch. Recommended dosage rate is 13-15%... view more
Applications
ACCUREL® FR519
Evonik
ACCUREL® FR519 by Evonik is a halogen-free, 50% flame retardant masterbatch. It is based on polycarbonate carrier resin. Suitable for injection molded components and profiles made from PC or PC/ABS... view more
Applications
ACCUREL® GA 320
Evonik
ACCUREL® GA 320 by Evonik acts as an anti-fog agent for polyethylene-based packaging films. It has a high content of glycerol monooleate on a porous LLDPE carrier. Exhibits low volatility and high... view more
Applications
ACCUREL® GA300
Evonik
ACCUREL® GA300 by Evonik is 60% anti-static masterbatch by Evonik. It is based on PP homopolymer. Also acts as a release agent in molding applications. Recommended for standard packaging films. The... view more
Applications
ACCUREL® GA301
Evonik
ACCUREL® GA301 by Evonik is a fast working anti-static agent and 50% glycerol monostearate-based masterbatch in LDPE carrier resin. Acts as a mold release agent and exhibits fast migration. Suitable... view more
Applications
ACCUREL® GA302
Evonik
ACCUREL® GA302 by Evonik is an anti-static masterbatch for styrenic films, sheets or injection molded parts. Also applicable as a release agent for injection molded parts and cell stabilizer for... view more
Applications
ACCUREL® GA303
Evonik
ACCUREL® GA303 by Evonik is a cell stabilizer, especially for EVA foams. Provides fast anti-static performance for polyolefin-based films, sheets or injection molded parts. It delays the exchange of... view more
Applications
ACCUREL® GA314
Evonik
ACCUREL® GA314 by Evonik acts as an anti-fog agent based on a distilled monoglyceride with a high content of glycerol monooleate on a polypropylene random copolymer. Used in food packaging films... view more
Applications
ACCUREL® GA332
Evonik
ACCUREL® GA332 by Evonik is an anti-fogging agent based on polypropylene copolymer. Used in cold fog food packaging films. Recommended dosage level of ACCUREL® GA332 is 1.5-3.5 %... view more
Applications
ACCUREL® GA342
Evonik
ACCUREL® GA342 by Evonik acts as an anti-fogging agent based on LDPE. Designed for cold fog food packaging films. Recommended dosage level of ACCUREL® GA342 is 0.7-0.9 %... view more
Applications
ACCUREL® GA354
Evonik
ACCUREL® GA354 by Evonik acts as a foaming agent. It is an effective cell stabilizing masterbatch in LDPE carrier. Suitable for polyolefin applications, especially in PE foams. ACCUREL® GA354 is... view more
Applications
ACCUREL® GA372
Evonik
ACCUREL® GA372 by Evonik is an amine or amide-free anti-static agent. It is based on LLDPE carrier resin. It can be incorporated by using gravimetric dosing equipment or by adding it to a dry blend... view more
Applications
ACCUREL® GA381
Evonik
ACCUREL® GA381 by Evonik acts as a non-corrosive anti-static agent. Used in sheets and films based on polystyrene or styrene-butadien-copolymer. It is a cold anti-fog concentrate with a shelf life... view more
Applications
ACCUREL® GA396
Evonik
ACCUREL® GA396 by Evonik acts as an anti-fogging agent designed for multi layer films. It is based on EVA carrier resin to be used in anti-fog layer as well as core layer. Used in agricultural films... view more
Applications
ACCUREL® GA399
Evonik
ACCUREL® GA399 by Evonik is LLDPE-based anti-static agent by Evonik. Designed for food packaging films and co-extruded film for lamination. Exhibits good electrical conductivity. ACCUREL® GA399 is... view more
Applications
ACCUREL® P-AS101
Evonik
ACCUREL® P-AS101 by Evonik acts as an anti-static agent based on PA6. Designed for fibers and is suitable for compounding applications. It is recommended at a dosage level of 3.0-5.0%. ACCUREL® P-AS101 is... view more
Applications
ACCUREL® P-AS102
Evonik
ACCUREL® P-AS102 is an anti-static agent by Evonik. It is based on PET designed for PET fibers. ACCUREL® P-AS102 is recommended at a dosage level of 2.0-5.0 %... view more
Applications
ACCUREL® P-AS501
Evonik
ACCUREL® P-AS501 by Evonik acts as an anti-static masterbatch. It is based on PA6 and is used in carpet fibers. It is recommended at a dosage rate of 3.0-5.0 %... view more
Applications
ACCUREL® SF 261
Evonik
ACCUREL® SF 261 by Evonik acts as a semi-permanent, internal anti-static agent. It is a saturated alkyl(C16-C18) bis(2-hydroxyethyl) amine on LLDPE. Designed for PP and PE films or injection molded... view more
Applications
ACCUREL® SF 617
Evonik
ACCUREL® SF 617 is a high purity slip agent by Evonik. It reduces the coefficient of friction at temperatures below 60°C. Provides smoother surface appearance and better internal melt flow. Suitable... view more
Applications
ACCUREL® SF 660
Evonik
ACCUREL® SF 660 by Evonik functions as a slip agent. Provides good release properties to injection molded PP/PE/EVA-based parts. It reduces the coefficient of friction at temperatures below 60°C... view more
Applications
ACCUREL® SF112
Evonik
ACCUREL® SF112 by Evonik acts as an antistatic agent for polyolefins. It is a mixture of tallow-based alkyl (C14-18) ethoxylated amine and glycerol monostearate on polyethylene. It stabilizes the... view more
Applications
ACCUREL® SF156
Evonik
ACCUREL® SF156 by Evonik functions as an anti-static masterbatch based on GPPS. Recommended for non-food applications. Recommended dosage rate is 2.0-3.0 %... view more
ACCUREL® SF162
Evonik
ACCUREL® SF162 by Evonik is an anti-static as well as slip masterbatch by Evonik. It is based on polypropylene homopolymer. Recommended for BOPP films. The recommended dosage rate of ACCUREL® SF162 is... view more
Applications
ACCUREL® SF164
Evonik
ACCUREL® SF164 by Evonik acts as an anti-static masterbatch. It is based on polypropylene homopolymer designed for white or opaque films. ACCUREL® SF164 is recommended at a dosage rate of 0.2-0.5 %... view more
ACCUREL® SF1710
Evonik
ACCUREL® SF1710 by Evonik acts as an antiblocking as well as a mold release agent. It is a mixture of refined primary stearamide and general-purpose polystyrene (GPPS). Suitable for films, sheets... view more
Applications
ACCUREL® SF1760
Evonik
ACCUREL® SF1760 by Evonik acts as a release agent, anti-blocking agent and cell stabilizer. It can be incorporated using normal dosing equipment or by adding it to a dry blend with virgin polymer... view more
Applications
ACCUREL® SF179
Evonik
ACCUREL® SF179 is a long-term internal anti-static agent. It is based on HDPE carrier resin. It can be incorporated using normal dosing equipment or by adding it to a dry blend with virgin polymer... view more
Applications
ACCUREL® SF266
Evonik
ACCUREL® SF266 by Evonik acts as an anti-static masterbatch based on polypropylene homopolymer. Recommended for standard packaging films. Shows an excellent thermal stability due to its saturated... view more
Applications
ACCUREL® SF268
Evonik
ACCUREL® SF268 by Evonok is 75% anti-static masterbatch based on polypropylene homopolymer. Recommended for BOPP or CPP films at a dosage rate of 0.2-0.4 %... view more
Applications
ACCUREL® SF270
Evonik
ACCUREL® SF270 is an anti-static agent based on polypropylene homopolymer. Used in BOPP films at a dosage rate of 0.2-0.9 %... view more
Applications
ACCUREL® SF271
Evonik
ACCUREL® SF271 by Evonik 65% anti-static and slip agent. It is based on PP homopolymer. Designed for print lamination films and biaxial oriented polypropylene (BOPP) films. Recommended dosage rate of... view more
Applications
ACCUREL® SF273
Evonik
ACCUREL® SF273 by Evonik acts as an anti-static or slip agent based on polypropylene homopolymer. It is used in heat sealable films and cigarette films at a dosage rate of 0.8-1.5 %... view more
Applications
ACCUREL® SF610
Evonik
ACCUREL® SF610 by Evonik is 40% slip agent based on polypropylene homopolymer. Designed for standard packaging films. It significantly reduces the coefficient of friction on the surface of PP films... view more
Applications
ACCUREL® SF611
Evonik
ACCUREL® SF611 by Evonik acts as a slip agent based on polypropylene homopolymer. Recommended for fibers at a dosage rate of 0.3-0.5 %... view more
Applications
ACCUREL® SF613
Evonik
ACCUREL® SF613 by Evonik functions as a slip additive or release agent based on polypropylene copolymer. ACCUREL® SF613 is recommended for standard packaging films at a dosage rate of 0.5-1.0%... view more
Applications
ACCUREL® SF640
Evonik
ACCUREL® SF640 by Evonik is LDPE-based slip agent. Recommended for PE films at a dosage rate of 0.2-0.3%... view more
Applications
ACCUREL® SF649
Evonik
ACCUREL® SF649 by Evonik is a mold release agent based on LDPE carrier resin. Recommended for complex molded parts. Compatible with thermoplastic polyolefins (TPO). ACCUREL® SF649 is recommended at a... view more
ACCUREL® SF681
Evonik
ACCUREL® SF681 by Evonik acts as a slip agent. It is a refined erucamide based on GPPS polymer. It can be incorporated using normal dosing equipment or by adding it to a dry blend with virgin... view more
Applications
ACCUREL® SL810
Evonik
ACCUREL® SL810 by Evonik acts as a release agent as well as a lubricant. Used in transparent parts at a dosage rate of 1.0-1.5%... view more
ACCUREL® SL811
Evonik
ACCUREL® SL811 by Evonik is a release agent as well as a lubricant. Recommended for transparent parts. Used at a dosage rate of 0.7-1.5%... view more
ACCUREL® Si 703
Evonik
ACCUREL® Si 703 by Evonik acts as a lubricant and release agent for molded parts made from PE. It also acts as a slip agent for PE films. Its pre-dispersion in the porous carrier supports a... view more
Applications
ACCUREL® Si 752
Evonik
ACCUREL® Si 752 by Evonik acts as a mold release agent and lubricant for HDPE-based applications. It reduces the coefficient of friction. It can be incorporated using gravimetric or volumetric dosing... view more
Applications
ACCUREL® Si 754
Evonik
ACCUREL® Si 754 by Evonik acts as a fast and effective lubricant and mold release agent for HDPE-based parts. Its pre-dispersion in the porous carrier supports a homogeneous distribution in the... view more
Applications
ACCUREL® Si 761
Evonik
ACCUREL® Si 761 by Evonik acts as a slip/lubricating agent in PP applications. It supports the release of injection-molded parts. Its pre-dispersion in the porous carrier supports a homogeneous... view more
Applications
ACCUREL® Si 792
Evonik
ACCUREL® Si 792 by Evonik acts as an effective lubricant and mold release agent for polycarbonate. Its pre-dispersion in the porous carrier supports a homogeneous distribution in the finished product... view more
Applications
ACCUREL® Si707
Evonik
ACCUREL® Si707 by Evonik acts as a lubricant as well as a release agent. It is based on PP copolymer carrier resin. It can be incorporated by using gravimetric dosing equipment or by adding it to a... view more
Applications
ACCUREL® Si714
Evonik
ACCUREL® Si714 by Evonik is a lubricant. It is polydimethylsiloxane based on LDPE carrier resin. Provides release effects in case of injection molding. It is recommended at a dosage level of 0.1-0.3... view more
Applications
ACCUREL® Si717
Evonik
ACCUREL® Si717 by Evonik is a release agent and lubricant designed by Evonik for BOPP films. It is polydimethylsiloxane based on PP copolymer carrier resin. It can be incorporated by using... view more
Applications
ACCUREL® Si750
Evonik
ACCUREL® Si750 by Evonik acts as a mold release agent. It is silicone oil-based on polypropylene homopolymer. It is recommended at a dosage rate of 0.2-0.4 %... view more
ACCUREL® Si753
Evonik
ACCUREL® Si753 by Evonik acts as a mold release agent as well as a lubricant. It can be incorporated by using gravimetric dosing equipment or by adding it to a dry blend with virgin polymer... view more
Applications
ACCUREL® Si755
Evonik
ACCUREL® Si755 by Evonik acts as a release agent as well as a lubricant. It is 50% silicone oil based in PA6. Offers excellent mold release for finished polyamide parts. It is recommended at a dosage... view more
Applications
ACCUREL® Si772
Evonik
ACCUREL® Si772 by Evonik acts as a release agent as well as lubricant. It is silicone oil based on PC. Designed for molded parts and compounds. ACCUREL® Si772 is recommended at a dosage rate of... view more
Applications
ACCUREL® Si790
Evonik
ACCUREL® Si790 by Evonik acts as a release agent as well as a lubricant. Recommended for molded parts and compounds at a dosage rate of 0.5-2.0 %... view more
ACCUREL® Si796
Evonik
ACCUREL® Si796 by Evonik acts as a release agent as well as a lubricant. Recommended for molded parts and compounds at a dosage rate of 0.5-2.0 %... view more
ACCUREL® Si801
Evonik
ACCUREL® Si801 by Evonik as a lubricant for cigarette films. It is UMHW silicone gum in PP homopolymer. It is recommended at a dosage rate of 1.0-2.0 %... view more
Applications
ACCUREL® Si802
Evonik
ACCUREL® Si802 by Evonik is a lubricant based on silicone gum in PP homopolymer. Recommended for cigarette films at a dosage rate of 1.0-2.0 %... view more
Applications
ACCUREL® Si803
Evonik
ACCUREL® Si803 is a lubricant by Evonik. Recommended for pipes and molded parts. Used at a dosage rate of 1-2%... view more
Applications
ACCUREL® Si804
Evonik
ACCUREL® Si804 by Evonik is release agent and lubricant. It is based on PET and is designed for transparent parts. Recommended at a dosage rate of 0.7-1.5 %... view more
Applications
ACCUREL® UV1604
Evonik
ACCUREL® UV1604 by Evonik is LDPE-based UV light stabilizer. Recommended for PE raffia at a dosage rate of 0.5-1.0 %... view more
Applications
ACCUREL® WF100
Evonik
ACCUREL® WF100 by Evonik acts as a foaming agent based on polypropylene copolymer. Recommended for thermoplastic vulcanizates(TPV) at a dosage rate of 1.0-3.0 %... view more
AEROBATCH® U 125 ES
Evonik
AEROBATCH® U 125 ES by Evonik acts as a processing aid. It is an ester grade based on fumed silica. It controls depolymerization and recrystallization behavior. It increases melt viscosity, melt strength... view more
Applications
AEROBATCH® U 125 ET
Evonik
AEROBATCH® U 125 ET is a processing aid by Evonik. It increases melt viscosity, melt strength as well as crystallization temperature and speed. It is an ester grade based on fumed silica. It... view more
Applications
AEROSIL® 130
Evonik
AEROSIL® 130 by Evonik is a hydrophilic fumed silica filler. Used in sealants and HTV-silicone rubber. Provides very good reinforcement and thixotropic behavior. Offers improved reinforcing... view more
Applications
AEROSIL® 130 V
Evonik
AEROSIL® 130 V by Evonik acts as a reinforcing filler. It is a hydrophilic fumed silica used in HCR-silicone rubber. It reduces dust development. AEROSIL® 130 V has a shelf life of 2 years... view more
Applications
AEROSIL® 150
Evonik
AEROSIL® 150 by Evonik acts as a reinforcer filler. Used in RTV-1K-silicone sealants and HTV-silicone rubber. Exhibits thixotropic properties in room temperature. AEROSIL® 150 has a shelf life of 2... view more
Applications
AEROSIL® 150 V
Evonik
AEROSIL® 150 V by Evonik is a filler for reduced dust development. It is a densified hydrophilic fumed silica. Shows improved incorporation and handling when applying sufficient shear forces... view more
Applications
AEROSIL® 200
Evonik
AEROSIL® 200 by Evonik is a hydrophilic fumed silica filler. It also acts as an anti-settling, thickening and anti-sagging agent. Used in HTV- and RTV-2K-silicone rubber. Possesses good... view more
Applications
AEROSIL® 200 SP
Evonik
AEROSIL® 200 SP by Evonik is a filler based on a hydrophilic fumed silica. Used in HTV- and RTV-silicone rubber. Designed for processing by liquid injection molding. Possesses very good... view more
Applications
AEROSIL® 200 V
Evonik
AEROSIL® 200 V by Evonik acts as a reinforcer in HTV-silicone rubber. Used as anti-settling, thickening, anti-sagging agent. Offers rheology and thixotropy control of liquid systems, binders and... view more
Applications
AEROSIL® 255
Evonik
Aerosil® 255 by Evonik acts as a reinforcing filler. Used as an anti-settling, thickening and anti-sagging agent. It is a hydrophilic fumed silica. Compatible with HTV-, LSR- and RTV-2K-silicone... view more
Applications
AEROSIL® 300
Evonik
AEROSIL® 300 by Evonik acts as a reinforcing filler. Suitable for cable compounds and unsaturated polyester resins. Offers rheology and thixotropy control of liquids, binders and polymers. Exhibits... view more
Applications
AEROSIL® 300 SP
Evonik
AEROSIL® 300 SP by Evonik is a reinforcing filler based on a hydrophilic fumed silica. Used in HTV- and liquid silicone rubber. Offers efficient in-situ hydrophobization and low crepe hardening... view more
Applications
AEROSIL® 300 V
Evonik
AEROSIL® 300 V by Evonik acts as a rheology modifier. It exhibits optimal dispersion yielding best results in pronounced thickening and thixotropy. It shows excellent transparency in unsaturated... view more
Applications
AEROSIL® 380
Evonik
AEROSIL® 380 by Evonik is a hydrophilic fumed silica with a very high specific surface area. It exhibits anti-settling and anti-sagging properties. It offers resistance to corrosion and provides... view more
Applications
AEROSIL® 90
Evonik
AEROSIL® 90 by Evonik acts as a filler for reinforcement and thixotropic effect in RTV-1K and 2K liquid silicone rubber. Suitable to achieve high loading levels and improves extrudability. AEROSIL®... view more
Applications
AEROSIL® OX50
Evonik
AEROSIL® OX50 by Evonik acts as an antiblocking agent. It improves dielectrical properties and enables high filler loading. Offers high tapped density. AEROSIL® OX50 provides low thickening... view more
Applications
AEROSIL® R 104
Evonik
AEROSIL® R 104 by Evonik is a reinforcing filler for HCR rubber. It also functions as a thickening agent for RTV- 1K silicone. Offers rheology control of binders and polymers. Improves free flow and... view more
Applications
AEROSIL® R 106
Evonik
AEROSIL® R 106 by Evonik is a reinforcing component for HCR silicone rubber and thickening agent for RTV- 1K silicone sealants. Offers improvement and maintenance of free flow and anti-caking... view more
Applications
AEROSIL® R 202
Evonik
AEROSIL® R 202 by Evonik acts as a thickening and thixotropic agent of cable gels for fiber optic cables. It improves flowability of powders and enables achieving of a high tribo-charge... view more
Applications
AEROSIL® R 711
Evonik
AEROSIL® R 711 by Evonik acts as a thickening agent. Offers improvement of the mechanical properties, e.g. hardness of composite formulations and plastics... view more
Applications
AEROSIL® R 7200
Evonik
AEROSIL® R 7200 is silica-based thickening agent by Evonik. Offers improvement of the mechanical properties, e.g. hardness of composite formulations and plastics... view more
Applications
AEROSIL® R 812
Evonik
AEROSIL® R 812 by Evonik acts as a thickening agent. It is a hydrophobic fumed silica surface treated with HMDS. Exhibits good flowability and dispersion properties. Improves mechanical and optical... view more
Applications
AEROSIL® R 812 S
Evonik
AEROSIL® R 812 S is a thickening agent by Evonik. Used for silicone rubber. Improves mechanical and optical properties... view more
Applications
AEROSIL® R 8200
Evonik
AEROSIL® R 8200 by Evonik acts as a reinforcing agent. It is a structure modified with hexamethyldisilazane aftertreated fumed silica. Provides very good reinforcing properties in silicone rubber... view more
Applications
AEROSIL® R 9200
Evonik
AEROSIL® R 9200 is a hydrophobic fumed silica-based thickening agent. Offers low rheological effect. Exhibits very good processability enable high loading levels of polymer systems... view more
Applications
AEROSIL® R 972
Evonik
AEROSIL® R 972 by Evonik functions as a reinforcing and thickening agent. It is based on silica after-treated with dimethyldichlorosilane. Designed for RTV silicone rubber and cable compounds... view more
Applications
AEROSIL® R 972 V
Evonik
AEROSIL® R 972 V by Evonik functions as a reinforcing filler. Designed for RTV silicone rubber and cable compounds. Offers water resistance and hydrophobizing of liquid systems. It is based on... view more
Applications
AEROSIL® R 974
Evonik
AEROSIL® R 974 by Evonik acts as a reinforcer and thickening agent. Offers improved thickening and thixotropic effect as well as transparency... view more
Applications
AEROSIL® TT 600
Evonik
AEROSIL® TT 600 by Evonik is a hydrophilic fumed silica-based anti-blocking agent. Used for PET-films, audio tape, video tape and packaging folio... view more
Applications
AEROSIL® VP Disp. W 1250
Evonik
AEROSIL® VP Disp. W 1250 by Evonik is a specially developed anti-blocking agent for plastics. It is a dispersion based on pyrogenic silica with low thickening effect. Exhibits high purity and broad particle... view more
Applications
AMICURE® 101
Evonik
Amicure® 101 by Evonik acts as an amine curing agent. Used in fiberglass/epoxy filament, encapsulate stator and ignition coils, passive components and general-purpose electrical devices. Offers very... view more
Applications
AMICURE® CG-325G
Evonik
Amicure® CG-325G by Evonik is a latent curing agent for epoxy resins. It is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive offering inhibit clumping and... view more
Applications
AMICURE® CG-NA
Evonik
AMICURE® CG-NA by Evonik acts as a latent curing agent for epoxy resins. Used in electrical laminates and solvent-based pre-preg composites. Activation temperature can be varied from 356°F to 203°F... view more
Applications
AMICURE® DBU-E
Evonik
Amicure® DBU-E by Evonik is a tertiary amine salt-based cure accelerator for high performance epoxy resin systems. Possesses high glass transition temperatures and improved toughness. Exhibits long... view more
Applications
AMICURE® PACM
Evonik
Amicure® PACM by Evonik is an unmodified cycloaliphatic amine crosslinker. Used in filament winding, laminates, casting and tooling. Offers long pot lives at moderate temperatures and very good... view more
Applications
AMICURE® UR
Evonik
AMICURE® UR by Evonik is a substituted urea-based accelerator by Evonik. Used in heat-cure composites and prepreg composites. Offers rapid cure and property development. Provides high glass... view more
Applications
AMICURE® UR-S
Evonik
AMICURE® UR-S by Evonik functions as a crosslinking agent. It is a good flow 1 phenyl 3,3 dimethyl urea with good one-component shelf stability. Used in heat-cure composites and prepreg composites... view more
Applications
AMICURE® UR10/30
Evonik
AMICURE® UR10/30 by Evonik is a substituted urea-based accelerator for dicyandiamide cured epoxy resins. It acts as a curing agent and a modifier. It provides rapid curing, high glass transition... view more
Applications
AMICURE® UR2T
Evonik
AMICURE® UR2T by Evonik is a substituted urea-based accelerator (1,1’-(4 methy-m-phenylene)bis(3,3 dimethyl urea)]) for dicyandiamide-cured epoxy resins. Used in heat-cure composites and prepreg... view more
Applications
AMICURE® UR7/10
Evonik
Amicure® UR7/10 by Evonik is 1-Phenyl 3,3 dimethyl urea-based accelerator. It combines excellent latency at ambient temperature in systems heated above its activation temperature. Possesses rapid... view more
Applications
Acematt® OP 278
Evonik
Acematt® OP 278 by Evonik is an organic matting agent. It is methylmethacrylate and styrene copolymer based aid for matting plastic semi-products such as films, cables, boards and non-pressurized... view more
Applications
Aerodisp® G 1220
Evonik
Aerodisp® G 1220 by Evonik acts as an anti-blocking agent for PET-films. It is a low thickening, low viscosity Aerosil® dispersion based on ethylene glycol. It is registered with EINECS, TSCA, DSL... view more
Applications
Aerodisp® W 1714
Evonik
Aerodisp® W 1714 by Evonik acts as an adhesion promoter and anti-blocking agent. It is a low viscosity, odorless Aerosil® fumed silica dispersion stabilized with phosphate and offers low thickening... view more
Applications
Aerodisp® W 7215 S
Evonik
Aerodisp® W 7215 S by Evonik acts as an adhesion promoter, anti-slip & anti-blocking agent and flocculation aid. It also functions as a stabilizing agent for emulsions. It is a water-based low viscosity... view more
Applications
Aerodisp® W 7225 P
Evonik
Aerodisp® W 7225 P by Evonik is a low viscosity adhesion promoter, anti slip agent and flocculation aid. Also acts as a stabilizing agent (KOH) for emulsions. Exhibits low thickening effect and... view more
Applications
Aerodisp® W 7330 N
Evonik
Aerodisp® W 7330 N by Evonik acts as an excellent dispersant for pigment, stabilizing agent (NaOH) and reinforcement agent. It maintains high transparency, mixes easily with acrylic, polyurethane and... view more
Applications
Aerodisp® W 7512 S
Evonik
Aerodisp® W 7512 S by Evonik acts as an adhesion promoter, anti-slip & anti-blocking agent and flocculation aid. Also acts as a stabilizing agent (ammonia) for emulsions. Exhibits low thickening effect... view more
Applications
Aerodisp® W 7520 N
Evonik
Aerodisp® W 7520 N by Evonik is an an adhesion promoter, anti-slip & anti blocking agent and flocculation aid. It is a water-based, low viscosity dispersion of aerosil® fumed silica. Also functions as a... view more
Applications
Aerodisp® W 7520 P
Evonik
Aerodisp® W 7520 P by Evonik functions as an adhesion promoter, anti-slip agent and flocculation aid. Also acts as a stabilizing agent (KOH) for emulsions. It is used for the surface treatment, e.g... view more
Applications
Aerodisp® W 7622
Evonik
Aerodisp® W 7622 by Evonik is an anti-blocking &-anti slip agent, flocculation aid and adhesion promoter. It has a slight ammonia odor and low thickening effect. It also functions as a stabilizing... view more
Applications
Aeroxide® Alu 65
Evonik
Aeroxide® Alu 65 by Evonik is an anti-blocking agent. It is a highly dispersed fumed metal oxide. Offers high BET surface area, high chemical purity and positive surface chargebility. Used in... view more
Applications
Aeroxide® Alu C
Evonik
Aeroxide® Alu C by Evonik is a fine-particulate, high purity aluminium oxide with high specific surface area and agglomerate structure. Due to its low water content, it can be used well as an additive... view more
Applications
Amicure® CG-1200G
Evonik
Amicure® CG-1200G by Evonik acts as a latent curing agent for epoxy resins. It contains 1.5% of an inert flow control additive to inhibit clumping and improve handling. Fine particle size provides... view more
Applications
Ancamide® 1618
Evonik
Ancamide® 1618 by Evonik is a low color, low viscosity curing agent and modifier. Ideal for ambient or low temperature curing of liquid epoxy resins. Designed for high gloss films, tank and... view more
Applications
Ancamide® 1638
Evonik
Ancamide® 1638 by Evonik is a very low viscosity curing agent and modifier. Designed for use with liquid epoxy resin cured at ambient or elevated temperature. Also used as an accelerator for other... view more
Applications
Ancamide® 2050
Evonik
Ancamide® 2050 by Evonik acts as a curing agent. It is a special polyamide adduct. Offers good corrosion resistance, high aqueous acid and skydrol resistance. Provides good cure at 50°F. Ancamide®... view more
Applications
Ancamide® 2137
Evonik
Ancamide® 2137 by Evonik is an accelerated polyamide adduct curing agent. Is non-corrosive and possesses good resistance to blush & exudation. Ancamide® 2137 offers very good flexibility and impact... view more
Applications
Ancamide® 220
Evonik
Ancamide® 220 by Evonik is a curing agent based on polyamide. Offers good color and light stability. Provides good chemical resistance... view more
Applications
Ancamide® 220-IPA-73
Evonik
Ancamide® 220-IPA-73 by Evonik is a reactive polyamide-based curing agent. Offers good color and light stability. Provides good chemical resistance... view more
Applications
Ancamide® 220-X-70
Evonik
Ancamide® 220-X-70 by Evonik is a standard reactive polyamide curing agent. Offers good color and light stability. Provides good chemical resistance. Ancamide® 220-X-70 complies with FDA 21CFR... view more
Applications
Ancamide® 2396
Evonik
Ancamide® 2396 by Evonik acts as a curing agent based on modified amidoamine. Imparts better chemical resistance and improved film appearance. Offers long pot life. Possesses good strength and... view more
Applications
Ancamide® 2424
Evonik
Ancamide® 2424 by Evonik is a curing agent. It is based on a modified polyamide optimized for dicyandiamide-cured epoxy resins. Enhances low temperature cure. Offers very good adhesion to metal and... view more
Applications
Ancamide® 2443
Evonik
Ancamide® 2443 by Evonik is a low viscosity, plasticizer-free epoxy curing agent and modifier by Evonik. It enables the development of high-performance formulations that can be applied via... view more
Applications
Ancamide® 2482
Evonik
Ancamide® 2482 by Evonik acts as a curing agent based on a modified polyamide. Provides good flexibility and very good environmental resistance. Ancamide® 2482 offers very good adhesion to metal and... view more
Applications
Ancamide® 260A
Evonik
Ancamide® 260A by Evonik acts as a curing agent. It is a standard reactive liquid polyamide for casting and laminates. Offers good chemical resistance. Ancamide® 260A shows compatability with a wide range... view more
Applications
Ancamide® 260TN
Evonik
Ancamide® 260TN is a curing agent by Evonik. It is a reactive liquid polyamide compatible with a wide range of solvents. Provides good chemical resistance to water and aqueous alkalies. Ancamide®... view more
Applications
Ancamide® 261A
Evonik
Ancamide® 261A by Evonik acts as epoxy curing agent and modifier. It is characterized by good color, color stability and excellent corrosion resistance. It is a high-viscosity polyamide designed for... view more
Applications
Ancamide® 2739
Evonik
Ancamide® 2739 by Evonik acts as a curing agent for industrial flooring applications. Ideal for diluted liquid epoxy resin at ambient and low temperature application at 10°C. It is free of... view more
Applications
Ancamide® 2781
Evonik
Ancamide® 2781 by Evonik is a versatile, low viscosity hardener designed to cure epoxy resin at elevated temperatures. It provides longer working time and low exotherm. Ancamide® 2781 is recommended... view more
Applications
Ancamide® 2798
Evonik
Ancamide® 2798 by Evonik is a modified aliphatic amidoamine curing agent designed for use with liquid epoxy resin. It is suitable as an epoxy curing agent and a modifier. It offers moderate pot life... view more
Applications
Ancamide® 3029
Evonik
Ancamide® 3029 by Evonik acts as an epoxy curing agent and a modifier. It offers low viscosity, moderate pot life and good adhesion to concrete. Ancamide® 3029 is recommended for casting resins. Its shelf... view more
Applications
Ancamide® 3033
Evonik
Ancamide® 3033 by Evonik is a low viscosity epoxy curing agent and a modifier. It offers low viscosity, long pot life and low exotherm. Ancamide® 3033 is recommended for use with liquid epoxy resin for... view more
Applications
Ancamide® 3034
Evonik
Ancamide® 3034 by Evonik acts as an epoxy curing agent and a modifier. It provides moderate pot life and good adhesion to substrates. Ancamide® 3034 is suitable for casting resins. It can be stored for 24... view more
Applications
Ancamide® 350A
Evonik
Ancamide® 350A by Evonik is a standard reactive liquid polyamide curing agent for epoxy resins. It is suitable for encapsulation and castings. It provides low viscosity, higher imidazoline content and... view more
Applications
Ancamide® 400
Evonik
Ancamide® 400 by Evonik is a special polyamide curing agent for liquid epoxy resins. Offers low viscosity and good chemical resistance. Ancamide® 400 provides good stability to light, color stability... view more
Applications
Ancamide® 500
Evonik
Ancamide® 500 is an aliphatic amidoamine-based curing agent. Offers low viscosity, long pot life and less critical loading. Shows good adhesion to concrete... view more
Applications
Ancamide® 502
Evonik
Ancamide® 502 is a low viscosity curing agent by Evonik. It has a relatively long pot life... view more
Applications
Ancamide® 506
Evonik
Ancamide® 506 by Evonik is an amidoamine curing agent with a very high imidazoline content. Used in castings and laminates. Offers low viscosity. Provides very long pot life and low exotherm... view more
Applications
Ancamide® 507
Evonik
Ancamide® 507 by Evonik acts as a polyfunctional curing agent. It is based on a fatty amidoamine for use in curing liquid epoxy resins. Ancamide® 507 exhibits fast cure and good water resistance... view more
Applications
Ancamide® 512
Evonik
Ancamide® 512 by Evonik is an aliphatic amidoamine curing agent. It is designed for use with epoxy resin at elevated temperatures. It can be used alone and in a mixture with other amine-based curing... view more
Applications
Ancamide® 910
Evonik
Ancamide® 910 is a versatile and flexible hardener by Evonik. Used for electronic potting and encapsulation compounds. Offers very good flexibility/peel strength. Provides very good thermal shock... view more
Applications
Ancamine® 1110
Evonik
Ancamine® 1110 by Evonik is dimethylaminomethylphenol-based catalyst. Designed for anhydride cures in castings and laminates and epoxy/polysulfide... view more
Applications
Ancamine® 1482
Evonik
Ancamine® 1482 by Evonik acts as a curing agent for liquid epoxy resins. Exhibits excellent chemical and heat resistance. Provides long pot life and can be mixed at room temperature. Ancamine® 1482... view more
Applications
Ancamine® 1608
Evonik
Ancamine® 1608 by Evonik is a modified aliphatic polyamine adduct based curing agent designed for for epoxy resin. Provides excellent chemical resistance against trichloroethane, xylene, water... view more
Applications
Ancamine® 1637-LV
Evonik
Ancamine® 1637-LV by Evonik is a rapid curing agent used in laminates. It is non-corrosive with rapid cure speed. Ancamine® 1637-LV offers very good resistance to solvents, inorganic acids and... view more
Applications
Ancamine® 1768
Evonik
Ancamine® 1768 is a rapid ambient or low temperature curing agent by Evonik. Used as an accelerator for other amine-based curing agents and crack injection. Possesses fast cure at ambient and low... view more
Applications
Ancamine® 1769
Evonik
Ancamine® 1769 by Evonik is a hydroxyalkylated polyamine curing agent. Used in electrical pottings and castings, wet lay-up laminating and tooling. It is DOT non-corrosive and offers good mechanical... view more
Applications
Ancamine® 1784
Evonik
Ancamine® 1784 is a modified aliphatic amine curing agent by Evonik. Used in castings and laminates. Offers long pot life and good impact resistance... view more
Applications
Ancamine® 1922A
Evonik
Ancamine® 1922A by Evonik is a low viscosity, moderately reactive room temperature curing agent. Used in electrical potting and encapsulation. Imparts very good thermal shock resistance. Provides... view more
Applications
Ancamine® 2014AS
Evonik
Ancamine® 2014AS is a modified polyamine curing agent. Used in composites and small potting applications. Offers long pot life. Provides rapid cure above their temperature of activation and good... view more
Ancamine® 2014FG
Evonik
Ancamine® 2014FG by Evonik is a latent curing agent based on a modified polyamine. It is used as an accelerator for dicyandiamide (DICY). It is a fine-grind version of Ancamine® 2014AS curing agent... view more
Applications
Ancamine® 2071
Evonik
Ancamine® 2071 by Evonik is a rapid setting, phenol-free, epoxy curing agent and modifier. It also functions as an accelerator for other amine-based curing agents. Offers very fast property... view more
Applications
Ancamine® 2205
Evonik
Ancamine® 2205 by Evonik is a phenol-free, curing agent. It is an accelerated modified aliphatic amine curative intended for use with liquid epoxy resins in two-part ambient or low-temperature cure... view more
Applications
Ancamine® 2264
Evonik
Ancamine® 2264 by Evonik is epoxy curing agent. It exhibits some of the beneficial properties of both cycloaliphatic and aromatic amines. It is an ideal alternative to aromatic diamines in the... view more
Applications
Ancamine® 2337S
Evonik
Ancamine® 2337S by Evonik is a modified aliphatic amine, a latent curing agent for epoxy resins. It offers very rapid reactivity, rapid green strength development and excellent shelf stability in... view more
Applications
Ancamine® 2390
Evonik
Ancamine® 2390 by Evonik is a low-viscosity modified amine curing agent designed for liquid epoxy resin. It yields formulations with high elongation, strength, and hardness. It offers one-to-one mix... view more
Applications
Ancamine® 2441
Evonik
Ancamine® 2441 by Evonik is a modified polyamine-based crosslinking agent. Used in potting compounds. Offers very good reactivity. Provides improved green strength development. Possesses good... view more
Applications
Ancamine® 2442
Evonik
Ancamine® 2442 is a modified polyamine crosslinker by Evonik. Used in potting compounds. Offers very good reactivity. Provides improved green strength development. Possesses good formulation shelf... view more
Applications
Ancamine® 2450
Evonik
Ancamine® 2450 is a cycloaliphatic amine crosslinker by Evonik. Used in filament winding, wet lay-up laminating and potting compounds. Offers higher glass transition temperature. Possesses low... view more
Applications
Ancamine® K54
Evonik
Ancamine® K54 by Evonik is a crosslinker based on 2,4,6-tris (dimethylaminomethyl) phenol. It is an efficient tertiary amine activator for epoxy resins cured with a wide variety of hardener types... view more
Applications
Ancamine® K61B
Evonik
Ancamine® K61B is tris-(dimethyla-minomethyl) phenol tri(2-ethyl hexoate) based crosslinking agent by Evonik. Used in electrical castings, potting, encapsulation and wet lay-up laminate systems... view more
Applications
Ancamine® T
Evonik
Ancamine® T by Evonik is a crosslinking agent based on N-(2-hydroxy ethyl)diethylene triamine. Acts as an ambient or elevated temperature curing agent for use with liquid epoxy resins. Possesses... view more
Applications
Ancamine® TEPA
Evonik
Ancamine® TEPA by Evonik acts as a crosslinking agent. It is a standard commercial grade of tetraethylene pentamine. It is less corrosive and has a lower vapor pressure and is also less hygroscopic... view more
Applications
Ancamine® Y Curing agent
Evonik
Ancamine® Y Curing agent by Evonik acts as a curing agent. Used in electrical and electronic encapsulation, tooling, laminates and composites, filament wound pipe and tanks. Offers very good physical... view more
Applications
Ancamine® Z curing agent
Evonik
Ancamine® Z curing agent is a curing agent by Evonik. Offers very good chemical resistance. Designed for electrical and electronic encapsulation, tooling, laminates and composites, filament wound... view more
Applications
CUREZOL® 1B2MZ
Evonik
CUREZOL® 1B2MZ by Evonik is imidazole curing agent for epoxy resins. It is a low viscosity accelerator. Designed for potting and encapsulation in electrical and electronic applications. CUREZOL®... view more
Applications
CUREZOL® 2E4MZ
Evonik
CUREZOL® 2E4MZ by Evonik is an accelerator in the reaction between epoxy resins and other curing agents. Offers single package latency from several hours to greater than six months. Possesses rapid... view more
Applications
CUREZOL® 2MA-OK
Evonik
CUREZOL® 2MA-OK by Evonik acts as an accelerator. Offers single package latency from several hours to greater than six months. It also functions as an accelerator in the reaction between epoxy... view more
Applications
CUREZOL® 2MZ Azine
Evonik
CUREZOL® 2MZ Azine by Evonik is an accelerator in the reaction between epoxy resins and other curing agents. Exhibits rapid cure beyond activation temperatures. Suggested for casting, potting and... view more
Applications
CUREZOL® 2P4MZ
Evonik
CUREZOL® 2P4MZ by Evonik acts as an accelerator for dicyandiamide, anhydride and phenolic curing agents. Offers single package latency from several hours to greater than six months. Provides high... view more
Applications
CUREZOL® 2PHZ-S
Evonik
CUREZOL® 2PHZ-S by Evonik is an accelerator for epoxy resins. Offers single package latency from several hours to greater than six months. Possesses rapid cure beyond activation temperatures. Provides... view more
Applications
CUREZOL® 2PZ
Evonik
CUREZOL® 2PZ is an accelerator by Evonik. Suitable for the reaction between epoxy resins and other curing agents. Offers single package latency from several hours to greater than six months... view more
Applications
CUREZOL® C17Z
Evonik
CUREZOL® C17Z by Evonik is an accelerator in the reaction between epoxy resins and other curing agents. Offers single package latency from several hours to greater than six months. Exhibits rapid... view more
Applications
Cofill® 11
Evonik
Cofill® 11 by Evonik acts as a filler and adhesion promoter. It is a mixture of 50% resorcinol and 50% of silica. Suitable for steel-belted radial tires, all-steel truck tires, conveyor belts... view more
Applications
Colcolor® E 30/90
Evonik
PE-LD/carbon black masterbatch. Used as inorganic color pigment in high jetness coloring of PE-LD, PE-HD, PP... view more
Applications
Colour black FW 200
Evonik
Colour black FW 200 by Evonik is carbon black. Used as inorganic color pigment for high jet coloring and tinting plastics... view more
Coupsil® 6109
Evonik
Coupsil® 6109 by Evonik acts as a reinforcer/ filler in rubber compounds. It is precipitated silica surface-modified with organosilane. It imparts greater tensile strength, higher moduli and reduced... view more
Applications
Coupsil® 8113
Evonik
Coupsil® 8113 by Evonik is a reinforcing filler based on precipitated silica, surface modified with organosilane Si 69®. It reacts with unsaturated polymer during vulcanization under formation of... view more
Applications
Coupsil® 8113 GR
Evonik
Coupsil® 8113 GR by Evonik acts as a reinforcing filler in rubber compounds. Offers the advantage of a homogeneous modification with low moisture adsorption during storage and significantly lower... view more
Applications
Coupsil® VP 6411
Evonik
Coupsil® VP 6411 by Evonik acts as a reinforcing filler in rubber compounds. It imparts greater tensile strength, higher moduli, optimized dynamic properties, lower compression set values and better... view more
Applications
Coupsil® VP 6508
Evonik
Coupsil® VP 6508 by Evonik acts as a reinforcing filler. Designed for peroxide-cured rubber compounds where optimum technical properties are required. Imparts greater tensile strength, higher modulus... view more
Applications
DRIVOSOL® 12
Evonik
DRIVOSOL® 12 by Evonik is an auxiliary component and blowing agent. Suitable for the synthesis of polyolefins and styrene polymers. It contains aerosol propellants with various mixing ratios of the... view more
Applications
DRIVOSOL® 21
Evonik
DRIVOSOL® 21 by Evonik acts as an auxiliary component and blowing agent. It contains aerosol propellants with various mixing ratios of the components n-Butane, iso-Butane and propane. Suitable for... view more
Applications
Dabco® 1027
Evonik
Dabco® 1027 by Evonik acts as a catalyst. It improves flowability while maintaining fast demolding. It exhibits good back-end cure and increased processing flexibility. It is highly reactive and... view more
Applications
Dabco® 1028
Evonik
Dabco® 1028 by Evonik is an amine catalyst. It improves the cream time and provides improved flowability while maintaining fast demolding. It is highly reactive and selective towards the urethane... view more
Applications
Dabco® 1030
Evonik
Dabco® 1030 by Evonik is a highly reactive amine catalyst by Evonik. It is selective towards the urethane reaction. It reduces demold time while having similar cream time to traditional amine... view more
Applications
Dabco® 2021
Evonik
Dabco® 2021 by Evonik is polyurethane catalyst by Evonik. Offers very good processing latitude and increased hardness. Used specifically for low density conventional and HLB flexible slabstock... view more
Applications
Dabco® 2033
Evonik
Dabco® 2033 by Evonik is a catalyst based on optimized tertiary amine. Offers broad processing latitude in the production of flexible slabstock polyurethane foam. Increases bun height at critical... view more
Applications
Dabco® 2035
Evonik
Dabco® 2035 by Evonik is a hardener. Used in flexible polyether slabstock foams... view more
Applications
Dabco® 2039
Evonik
Dabco® 2039 by Evonik is amine catalyst. Used to promote the urethane (polyol isocyanate) reaction. It has low VOC/fogging values. It is a low odor alternative to morpholine based amines in flexible... view more
Applications
Dabco® 2040
Evonik
Dabco® 2040 by Evonik is a low odor amine catalyst. It has a smooth rise profile. It enhances cure and adhesion to substrate in a variety of flexible as well as rigid polyurethane foams. It is... view more
Applications
Dabco® 25-S
Evonik
Dabco® 25-S by Evonik acts as a catalyst. It is used in the synthesis of prepolymers and curing of polyurethanes... view more
Applications
Dabco® 3040
Evonik
Dabco® 3040 is a mild balanced amine catalyst by Evonik. It works well in different kind of iso system like TDI, T/M, M/T and MDI systems. Exhibits excellent surface curing at lower mold temperature... view more
Applications
Dabco® 33-LV
Evonik
Dabco® 33-LV by Evonik acts as catalyst. It is used in the synthesis of prepolymers and curing of polyurethanes... view more
Applications
Dabco® 33-LX
Evonik
view more
Applications
Dabco® 8154
Evonik
Dabco® 8154 by Evonik is a blocked tertiary amine catalyst. It offers improved curing of the foam. It does not prolong the demold times. It promotes the urethane (polyol-isocyanate) reaction... view more
Applications
Dabco® B-16
Evonik
Dabco® B-16 by Evonik is amine catalyst. Used in polyester die cuttable flexible slabstock foams, integral skin and microcellular systems. Dabco® B-16 provides improved surface cure... view more
Applications
Dabco® BA150
Evonik
Dabco® BA150 by Evonik is a non-emissive, hydrolytically stable blocking agent. It is used to delay the catalyst reaction and to improve flow while maintaining back end cure. Its components are all... view more
Applications
Dabco® BA201
Evonik
Dabco® BA201 by Evonik acts as a processing aid. Provides front-end delay while increasing back-end cure. It improves surface cure and increase the stiffness of PIR boards. Used for all polyether... view more
Applications
Dabco® BA305
Evonik
Dabco® BA305 by Evonik acts as a catalyst. It is compatible with other commonly used polyurethane catalysts and additives. It can be used in combination with Dabco® NE1090 non emissive gel catalyst... view more
Applications
Dabco® BDMA
Evonik
Dabco® BDMA by Evonik is benzyldimethylamine catalyst. It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It is also used for... view more
Applications
Dabco® BL-11
Evonik
Dabco® BL-11 by Evonik is an active amine catalyst. It is designed for all types of flexible foam and extrusion blow molding applications. It is suitable for thermoplastic polyurethane... view more
Applications
Dabco® BL-13
Evonik
Dabco® BL-13 by Evonik is a catalyst based on (2-dimethylamino ethyl) ether. Used in flexible foams. Dabco® BL-13 is designed for extrusion blow molding... view more
Applications
Dabco® BL-17
Evonik
Dabco® BL-17 by Evonik is a delayed-action catalyst. Used in energy absorbing non-recoverable rigid foams. Dabco® BL-17 is suitable for thermoplastic polyurethane and extrusion blow molding... view more
Applications
Dabco® BL-19
Evonik
Dabco® BL-19 by Evonik is a catalyst based on bis(2-dimethylamino ethyl) ether. It is a tertiary amine that primarily promotes the urea (water-isocyanate) reaction. Dabco® BL-19 is suitable for... view more
Applications
Dabco® BLV
Evonik
Dabco® BLV by Evonik is a blend of blowing and gelling amine catalyst. Used in flexible slabstock foams and extrusion blow molding applications. Dabco® BLV offers superb catalytic activity... view more
Applications
Dabco® BP52
Evonik
Dabco® BP52 by Evonik is a flame lamination agent. It features low viscosity for easy handling and incorporation into the foam formulation. Offers excellent adhesion of the foam to the substrate... view more
Applications
Dabco® BX405
Evonik
Dabco® BX405 by Evonik is a high efficiency amine catalyst. Shows better post-curing performance than DMCHA and catalytic activity equivalent to DMCHA. It strongly catalyzes the reaction of polyol... view more
Applications
Dabco® CS90
Evonik
Dabco® CS90 by Evonik is a tertiary amine catalyst by Evonik. Offers increased foam softening... view more
Applications
Dabco® Crystalline
Evonik
Dabco® Crystalline by Evonik is a crystalline, 100% solid triethylene diamine (TEDA)-based catalyst with high-purity. Used in all types of polyurethane foams including flexible slabstock, flexible... view more
Applications
Dabco® DC 3043
Evonik
Dabco® DC 3043 is a blowing agent by Evonik. It is silicone glycol copolymer for use in shoe soles. Dabco® DC 3043 is suitable for TPU applications... view more
Applications
Dabco® DC1
Evonik
Dabco® DC1 by Evonik is a catalyst that provides strong gelling and back end cure by promoting the urethane (polyol-isocyanate) reaction while delaying initiation as well as providing long pot life... view more
Applications
Dabco® DC193
Evonik
Dabco® DC193 by Evonik is a silicone surfactant with improved foam formation. It provides excellent flame retardant properties. It possesses good compatibility with most common polyol premixes and... view more
Applications
Dabco® DC198
Evonik
Dabco® DC198 by Evonik acts as an emulsifier. It is a high-potency silicone glycol copolymer with high efficiency. Provides good stability in both water and amine premixes. Dabco® DC198 is used in... view more
Applications
Dabco® DC2
Evonik
Dabco® DC2 by Evinik is a catalyst that provides delayed reaction initiation while maintaining a strong back end cure. It promotes the urethane (polyol-isocyanate) reaction in flexible molded... view more
Applications
Dabco® DC2525
Evonik
Dabco® DC2525 by Evonik acts as a silicone stabilizer and emulsifier. Used in cold cure flexible molded MDI and MDI/TDI polyurethane systems. Dabco® DC2525 is suitable for processing by extrusion... view more
Applications
Dabco® DC2584
Evonik
Dabco® DC2584 by Evonik is a high efficiency surfactant and foaming agent. Designed for flexible molded foam applications, MDI and MDI/TDI cold cure systems. It has a low fogging potential... view more
Applications
Dabco® DC2585
Evonik
Dabco® DC2585 is a silicone surfactant and emulsifier by Evonik. Offers very good vent stability and has the ability to eliminate basal cell formation. Possesses low VOC and fogging values and... view more
Applications
Dabco® DC3042
Evonik
Dabco® DC3042 by Evonik acts as a surfactant. It is a bulk stabilizing silicone glycol copolymer designed for use with all polyester and polyether microcellular applications. Possesses a fine... view more
Applications
Dabco® DC3043
Evonik
Dabco® DC3043 by Evonik is a surface-stabilizing surfactant. It provides fine, uniform cell size distribution, good surface quality, and good dimensional stability in normal and lower-density shoe... view more
Applications
Dabco® DC5000
Evonik
Dabco® DC5000 by Evonik acts as a foaming agent. It is a non-hydrolysable silicone glycol copolymer suitable for TPU applications... view more
Applications
Dabco® DC5043
Evonik
Dabco® DC5043 by Evonik is a low viscosity emulsifier based on a silicone glycol copolymer. Used in high-resiliency flexible polyurethane foams. Provides non-hydrolyzable bonding and is suitable for... view more
Applications
Dabco® DC5098
Evonik
Dabco® DC5098 by Evonik is a non-hydrolyzable silicone emulsifier by Evonik. Used in rigid polyurethane and polyisocyanurate foam. Dabco® DC5098 offers very good dimensional stability... view more
Applications
Dabco® DC5103
Evonik
Dabco® DC5103 by Evonik acts as a silicone surfactant. Offers very good emulsification properties. It is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5160
Evonik
Dabco® DC5160 by Evonik acts as a foaming agent. It is based on silicone glycol. Provides medium to high efficiency. Dabco® DC5160 is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5164
Evonik
Dabco® DC5164 by Evonik is a high-efficiency silicone surfactant. Used for cold cure flexible molded polyurethane foam systems. Suitable for extrusion blow molding applications. Offers very good... view more
Applications
Dabco® DC5179
Evonik
Dabco® DC5179 by Evonik is a surfactant based on a non-hydrolysable silicone. Provides very good vent stability. Dabco® DC5179 is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5188
Evonik
Dabco® DC5188 by Evonik is a high efficiency silicone stabilizer by Evonik. Acts as a foaming agen for polyether flexible slabstock formulations. Dabco® DC5188 is suitable for TPU resin... view more
Applications
Dabco® DC5258
Evonik
Dabco® DC5258 by Evonik acts as an emulsifier based on silicone glycol. Used in a variety of cold cure flexible molded and semi-flexible polyurethane foam systems. Suitable for thermoplastic... view more
Applications
Dabco® DC5350
Evonik
Dabco® DC5350 by Evonik acts as a silicone surfactant. Provides a good balance of stabilization and open cells. Imparts improved performance in flammability testing. Dabco® DC5350 offers good foam bulk... view more
Applications
Dabco® DC5357
Evonik
Dabco® DC5357 by Evonik is non-hydrolyzable silicone emulsifier. Used for water co-blown rigid polyurethane foams and extrusion blow molding applications. Offers very good foam flowability and... view more
Applications
Dabco® DC5526
Evonik
Dabco® DC5526 by Evonik is a foaming agent and silicone stabilizer by Evonik. Used in polyester flexible slabstock foam and thermoplastic polyurethane... view more
Applications
Dabco® DC5585
Evonik
Dabco® DC5585 by Evonik acts as a silicone surfactant. Offers superior thermal properties, excellent foam flow, competitive cost in use and fine as well as closed cell structure. Dabco® DC5585 is used... view more
Applications
Dabco® DC5598
Evonik
Dabco® DC5598 by Evonik is a non-hydrolyzable emulsifier. Used in rigid polyurethane & polyisocyanurate foam and extrusion blow molding applications. Offers good compatibility with common rigid foam... view more
Applications
Dabco® DC5604
Evonik
Dabco® DC5604 by Evonik is a non-hydrolyzable emulsifier based on silicone glycol copolymer. Used in producing rigid PUR and PIR foams. Offers an ideal balance of processing and performance... view more
Applications
Dabco® DC5810
Evonik
Dabco® DC5810 by Evonik is a high-efficiency surfactant. Provides good nucleation, a high degree of emulsification and good bulk stability. It produces foams with fine as well as uniform cell... view more
Applications
Dabco® DC5900
Evonik
Dabco® DC5900 by Evonik acts as a foaming agent. Dabco® DC5900 offers improved emulsification within the foam system... view more
Applications
Dabco® DC5901
Evonik
Dabco® DC5901 by Evonik is a foaming agent. Exhibits a high degree of emulsification. Dabco® DC5901 provides very good froth stability and good bulk stability... view more
Applications
Dabco® DC5906
Evonik
Dabco® DC5906 by Evonik acts as a foaming agent. Used as a foam stabilizer in flexible polyether slab stock foam... view more
Applications
Dabco® DC5933
Evonik
Dabco® DC5933 by Evonik acts as a surfactant. Provides good nucleation, a high degree of emulsification and good bulk stability to produce foams with fine as well as uniform cell structure. Offers... view more
Applications
Dabco® DC5950
Evonik
Dabco® DC5950 by Evonik acts as an emulsifier. Offers improved performance through its ability to emulsify incompatible components. Dabco® DC5950 is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5986
Evonik
Dabco® DC5986 by Evonik acts as a surfactant. Provides good nucleation, high degree of emulsification, excellent froth stability and good bulk stability to produce foams with uniform cell structure... view more
Applications
Dabco® DC5987
Evonik
Dabco® DC5987 is a high-efficiency surfactant by Evonik. Provides good nucleation, high degree of emulsification, excellent froth stability and good bulk stability to produce foams with uniform cell... view more
Applications
Dabco® DC5990
Evonik
Dabco® DC5990 is a high efficiency, non-hydrolyzable surfactant by Evonik. It can provide good nucleation, a high degree of emulsification, excellent froth stability and good bulk stability to... view more
Applications
Dabco® DC5LE
Evonik
Dabco® DC5LE by Evonik acts as an accelerator. It is a low emission delayed action co-catalyst that strongly promotes the urethane (polyol-isocyanate) reaction while maintaining cream time and... view more
Applications
Dabco® DC6070
Evonik
Dabco® DC6070 by Evonik acts as an emulsifier. Possesses ability to eliminate basal cell formation in difficult-to-mold tooling. Offers excellent foam surface appearance and vent stability as well... view more
Applications
Dabco® DMDEE
Evonik
Dabco® DMDEE by Evonik is an amine blowing catalyst. It is 100% dimorpholinyldiethylether (DMDEE). Used in rigid foam sealant systems as well as for flexible slabstock foams. Dabco® DMDEE is suitable... view more
Applications
Dabco® EG
Evonik
Dabco® EG by Evonik is an amine-based catalyst. Used in polyurethane formulations. Dabco® EG possesses strong gelation catalysis... view more
Applications
Dabco® JXP508
Evonik
Dabco® JXP508 by Evonik is a highly efficient amine catalyst. Based on its trimerization capability, it could provide very good post-curing to foam. Improves adhesion strength of foam to substrate... view more
Applications
Dabco® K-15
Evonik
Dabco® K-15 by Evonik acts as a cost-effective isocyanurate catalyst. It is used in the production of rigid isocyanurate foams. Dabco® K-15 provides high conversion rate... view more
Applications
Dabco® K-15LV
Evonik
Dabco® K-15LV by Evonik acts as a catalyst. Its low viscosity facilitates ease of pumping at low temperatures. It is cost-effective and offers high conversion rate. Dabco® K-15LV promotes the... view more
Applications
Dabco® K2097
Evonik
Dabco® K2097 by Evonik is a standard trimerization catalyst. Used for rigid foam applications. Dabco® K2097 is suitable for thermoset PU resin... view more
Applications
Dabco® LK-221
Evonik
Dabco® LK-221 by Evonik is a unique organic surfactant for microcellular and rigid foam formulations. Provides a smooth surface and excellent adhesion. Can be used as a replacement or co-surfactant... view more
Applications
Dabco® LK-443
Evonik
Dabco® LK-443 by Evonik is a unique organic surfactant for use in rigid polyurethane applications to provide a smooth surface. It can be used as a replacement or co-surfactant for silicone-based... view more
Applications
Dabco® MB20
Evonik
Dabco® MB20 by Evonik acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting... view more
Applications
Dabco® MP601
Evonik
Dabco® MP601 by Evonik is a delayed action, balanced tertiary amine catalyst. It is developed for fast demold high resiliency (HR) molded foam systems. Provides effective balanced reactions with... view more
Applications
Dabco® MP602
Evonik
Dabco® MP602 by Evonik is a delayed non-emissive amine catalyst. It promotes the urethane (polyol-isocyanate) reaction. It was developed for use in cold cure and hot cure flexible molded... view more
Applications
Dabco® MP608
Evonik
Dabco® MP608 by Evonik acts as a delay balance amine catalyst. It works well in TDI, T/M, M/T and MDI systems. It delays cream time with fast post curing and effectively balances reactions with... view more
Applications
Dabco® NCM
Evonik
Dabco® NCM by Evonik is n-cocomorpholine- based catalyst. Used for polyester slabstock foams... view more
Applications
Dabco® NE 400
Evonik
Dabco® NE 400 is a novel non-emission (NE) catalyst by Evonik. Used in the production of polyester slabstock foam... view more
Applications
Dabco® NE1070
Evonik
Dabco® NE1070 by Evonik is a non-emissive amine catalyst. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible foam applications to meet automotive... view more
Applications
Dabco® NE1090
Evonik
Dabco® NE1090 by Evonik acts as a novel non-fugitive gelling catalyst. It has the ability to react chemically into the polyurethane foam matrix, thereby it do not contribute to emissions. Exhibits... view more
Applications
Dabco® NE210
Evonik
Dabco® NE210 is a balanced non-emissive amine catalyst by Evonik. Offers no amine catalyst emissions, no VOC emissions, no vinyl staining and no windshield fogging. Possesses master batch stability... view more
Applications
Dabco® NE300
Evonik
Dabco® NE300 by Evonik is a non-emissive amine catalyst. Promotes the urea (water isocyanate) reaction. It possesses master batch stability. It reacts into the polyurethane matrix, thereby not... view more
Applications
Dabco® NE310
Evonik
Dabco® NE310 is a non-fugitive, non-emissive reactive amine catalyst by Evonik. Provides good resin-side stability. Compatible with other commonly used polyurethane catalysts and additives. Promotes... view more
Applications
Dabco® NE320
Evonik
Dabco® NE320 by Evonik is a high purity, fourth generation no-emission (NE) blow catalyst by Evonik. It binds chemically into the polyurethane foam matrix while maintaining foam properties in MDI... view more
Applications
Dabco® NE500
Evonik
Dabco® NE500 by Evonik acts as a non-emissive amine catalyst. It is used in flexible slabstock applications to meet Certipur® or LGA requirements. Shows equivalent foam physical properties, master... view more
Applications
Dabco® NE600
Evonik
Dabco® NE600 is a balanced non-emissive amine catalyst by Evonik. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible slabstock applications to meet... view more
Applications
Dabco® PE40
Evonik
Dabco® PE40 by Evonik acts as a processing aid. It is an excellent melamine stabilizer. It allows solid powder to well stabilize in polyols when pre-mixing solid powders and polyols especially in... view more
Applications
Dabco® PM300
Evonik
Dabco® PM300 by Evonik is a blowing agent enhancer. It significantly reduces the level of conventional surfactant required. It produces fine uniform cells and reduces polyol side viscosity. Improves... view more
Applications
Dabco® PM301
Evonik
Dabco® PM301 by Evonik acts as a surfactant. Designed to improve the efficiency of blowing agents used in rigid polyurethane foam, in particular spray foam. Offers a reduction in the use level of... view more
Applications
Dabco® PT302
Evonik
Dabco® PT302 by Evonik is a high efficiency tertiary amine catalyst. It can be used in rigid foam applications, especially rigid spray foam. Dabco® PT302 strongly catalyzes the reaction of polyol... view more
Applications
Dabco® PT303
Evonik
Dabco® PT303 by Evonik is a high efficiency tertiary amine catalyst. It strongly catalyzes the urea (water-isocyanate) reaction for rigid spray polyurethane foam... view more
Applications
Dabco® PT304
Evonik
Dabco® PT304 by Evonik is a high efficiency amine, medium trimer catalyst. It can improve post cure and adhesion strength. Dabco® PT304 can be used in rigid spray foam... view more
Applications
Dabco® PT305
Evonik
Dabco® PT305 by Evonik is a reactive amine catalyst. Offers improved post-cure, dimensional stability and lower odor. Used for rigid polyurethane foam... view more
Applications
Dabco® PT306
Evonik
Dabco® PT306 by Evonik acts as a highly efficient gelling amine catalyst. Provides better foam density distribution. It is developed for reducing hydrolysis and improving system stability... view more
Applications
Dabco® RP202
Evonik
Dabco® RP202 by Evonik is a non-emissive balanced amine catalyst. It binds chemically into the PU foam matrix eliminating contributions to odor and VOC emissions. It increases the airflow, improves... view more
Applications
Dabco® RP203
Evonik
Dabco® RP203 by Evonik acts as a balanced tertiary amine catalyst. Provides excellent performance in methylene chloride-blown flexible slabstock foams. Compatible with other blowing agents. It... view more
Applications
Dabco® RP204
Evonik
Dabco® RP204 by Evonik is a non-emissive amine catalyst promoting a balance of urethane and urea reactions with high efficiency and wide processing latitude. Possesses excellent foam stability that... view more
Applications
123Next >
Spotlight
Birla carbon
Continua™ 8000: A sustainable alternative to furnace carbon black
A Sustainable Carbonaceous Material
Read More
Clariant
Halogen-free flame retardants make electric cars safer & lighter
Learn more about Clariant’s Exolit® range
Read More
Ingenia
Live webinar: INCIRCLE® IP1601 compatibilizer for barrier films
Join the live webinar on 16th May to upgrade your packaging practices
Read More
Nittobo
Nittobo: Pioneering polymer reinforcement
Introducing Nittobo's innovative FlatFibers
Read More
Silma
Join Silma and unlock the potential of XL HFFR and HFFR cable compounds
Exclusive webinar to delve into HFFR Cable Compounds
Read More
Silma
Unlocking innovation: Explore XL & XL HFFR cable compounds
Dive into the world of advanced HFFR Cable Compounds
Read More
Tolsa
Achieve an anti-drip effect with Tolsa's ADINS® technology
Reduce smoke emissions with ADINS® technology
Read More
Quick Navigation
Stay connected
Subscribe to our Newsletters
Industries Served
PlasticsElastomers
Plastics
Elastomers
Coatings Ingredients
Coatings
Ingredients
Adhesives Ingredients
Adhesives
Ingredients
Cosmetics Ingredients
Cosmetics
Ingredients
Polymer Additives
Polymer
Additives
Copyright © SpecialChem 2024
Terms and Conditions Privacy Policy Cookie Policy
Back to Top