OK
The Universal Selection Source:
Polymer Additives
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
430 products match your search
Product Name
Supplier
Description
Acetine 51035 is a glycerol triacetate. Acts as a solvent and plasticizer. It is readily soluble in aromatic hydrocarbons and most organic solvents. It has low solubility in aliphatic hydrocarbons... view more
Addocat® 102 is a 1-methylimidazole. Acts as a crosslinking catalyst. Gives the rigid foam a tough and elastic skin, thus improving the adhesion of the foam to facings, particularly in sandwich... view more
Addocat®104 is triethylene diamine (1,4-diazabicyclo(2,2,2)octane. Acts as a catalyst. In foam production it activates both the gas reaction and the crosslinking reaction.In the production of... view more
Addocat105 is a solution of triethylene diamine in dipropylene glycol. Acts as a catalyst for the production of polyurethanes. In foam production, it activates both the gas reaction and the... view more
Addocat106 is 25 % solution of triethylene diamine in 1,4 butanediol. Acts as a catalyst for polyurethane. Suitable for use in semi-rigid integral systems such as formulations for shoe soles... view more
Addocat108 is a mixture of bis-(2-dimethyl-aminoethyl)-ether and dipropylene glycol. Acts as a activator for the production of polyurethane flexible slab-stock foam and hot-molded foam. It is also... view more
Addocat117 is 1,4-dimethylpiperazine. Acts as a co-catalyst for polyurethanes, especially for low odour polyester flexible slabstock foam. Dosage should be between 0.1 and 0.5 p.b.w. Addocat117 to... view more
Addocat®1221 VN is a blend of tertiary amines with polyetherpolyol. Acts as a catalyst for the manufacture of rigid polyurethane foams and building boards. It is hygroscopic and should therefore be... view more
Addocat1656 is preparation of a tertiary amine, a metallo-organic compound and an emulsifier. Acts as a catalyst for the manufacture of polyurethane (PU) or polyisocyanurate (PIR) rigid foams... view more
Addocat1926 is a mixture of a tertiary amine and a polyol. Acts as a catalyst for the production of rigid polyurethane foams. It is hygroscopic and should therefore be protected from air humidity... view more
Addocat201 is dibutyl tin dilaurate. Acts as a catalyst for the production of polyurethanes, e.g. integral skin foams, rigid spray foam, cold-curing cast elastomers etc. It considerably reduces the... view more
Addocat® 30EL08 is a polyol-amine. Acts as a catalyst. Provides adjustment of the flowability. Used for the production of polyurethane elastomers by rotational casting and for the production of... view more
Addocat®3144 is tertiary amine. Acts as a catalyst for the production of HR molded foam and rigid foam. Applications include continuous and discontinuous production of foam boards and sandwich... view more
Addocat5073 is 50 % solution of a heterocyclic tertiary amine in DPG. Acts as a catalyst for PUR carpet backings and PVC back foaming. It hardly shows any discoloration effects. Recommended dosage:... view more
Addocat 726 B is dimethylcyclohexylamine. Acts as a catalyst for the production of rigid polyurethane foam. Suitable for use in insulation of refrigerators and foam filling of intricately shaped... view more
Addocat9018 is dimethylaminopropylamine. Acts as a catalyst for the production of HR molded foams. It activates mainly the blowing reaction & shortens the curing time. It is suitable in all flexible... view more
Addocat®9558 is bis-(2-dimethylaminoethyl)-ether. Acts as a catalyst for the production of polyurethane flexible slab-stock foam and hot-molded foam. It improves the flowability of the system. It is... view more
Addocat9727 P is a mixture of tertiary amines. Acts as a catalyst for the production of polyurethane foams, e.g. flexible slabstock foam (ether type), hot molded foam, HR foam. It is a base... view more
Lanxess
AddocatDB is tertiary amine. Acts as a catalyst for the production of polyurethane foams, e.g. ester-based flexible slabstock foam and rigid foam. It slightly activates the crosslinking reaction. It... view more
AddocatDMEA is dimethylethanol amine. Acts as a catalyst for the production of polyether based polyurethane foams, e.g. flexible slabstock foam, rigid foam. In rigid foams, AddocatDMEA is suitable... view more
AddocatLTB is benzylamino-borontrifluoride-complex. Acts as an accelerator for epoxy/hardener-combinations and for the catalytic curing of epoxy resins. Also used for catalytic curing of epoxy... view more
Lanxess
AddocatPV is pentamethyldiethylenetriamine. Acts as a catalyst for the production of polyurethane foams, e.g. flexible polyester slabstock foam and rigid foam. It catalyzes mainly the gas reaction... view more
Lanxess
AddocatSO is stannous (II) ethylhexanoate. Acts as a catalyst for the production of polyurethanes, e.g. polyether and polyester flexible slabstock foam, hot molded foam, rigid spray foam. It... view more
Addolink® 0312 is alicyclic diol. Acts as a crosslinker for polyurethane hot-curing cast elastomers. It is used in liquid form and protected from moisture when in use. With its use, cast time is... view more
Addolink® 110 is an aromatic amine. Acts as a crosslinking agent in combination with prepolymers for the manufacture of PUR elastomers. At temperatures between 20-25 °C, the product has a shelf life... view more
Addolink® 1604 is an aromatic diamine. Used as a crosslinking agent in combination with prepolymers for the manufacture of high-quality heat curing PUR elastomers, giving considerably longer casting... view more
Addolink1701 is an aromatic diamine. Acts as a chain extender for high quality polyurethane and polyurea systems. Suitable for use in applications RIM two component PU systems (Reaction Injection... view more
Addolink® 1708 is a liquid aromatic diamine. Acts as a curative for the manufacturing of polyurethanes or polyurea elastomers. It also functions as a curing agent for advanced epoxy resins. It... view more
Addolink® 30/10 pastilles is hydroquinone di-(2-hydroxyethyl) ether (HQEE). Acts as a crosslinking agent for the production of thermoplastic polyurethanes. It is noted for its high degree of purity... view more
Addolink® 30/10 technical ground is hydroquinone di-(2-hydroxyethyl) ether. Acts as a crosslinking agent for isocyanates crosslinkable polyurethane rubber. It is noted for its high degree of purity... view more
Lanxess
Addolink® B is 1,4-butane diol. Acts as a crosslinking agent for the production of polyurethane elastomers (hot- and cold-curing cast systems) and of integral skin foams. The reaction between... view more
Lanxess
Addolink® H is 1,4-butane diol with special retarder. Acts as a crosslinking agent for the production of high modulus polyurethane elastomers (hot-curing cast systems). It is hygroscopic. At a... view more
Lanxess
Addolink®R is 1,4-butane diol with special activator. Acts as a crosslinking agent for polyurethane elastomers (hot- and cold-curing cast systems). It has a shelf life of 12 months... view more
1,1,1-tris-(p-hydroxyphenyl)ethane. Used as a crosslinking agent for the production of branched polycarbonates and suitable for both common production processes - the interfacial and the melt... view more
Addolink® TR is 1,1,1-trimethylol propane. Acts as a crosslinking agent for polyurethane elastomers (hot- and cold-curing cast systems). The reaction between Addolink® TR and polyisocyanates leads... view more
Addolink® TR Schuppen is 1.1.1-trimethylol propane. Acts as a crosslinking agent for polyurethane elastomers (hot- and cold-curing cast systems). The reaction between Addolink® TR Schuppen and... view more
Addolink®TT is dimeric toluene-2.4-diisocyanate. Acts as a bonding agent to improve the adhesion of fabrics (polyester, polyamide, aramide) to plasticized PVC or rubber. Recommeneded dosage is... view more
Addonyl® 8073 is a high-molecular weight polyol. It is produced through an anionic polymerization of caprolactam. During the pressureless casting process the monomeric caprolactam melt is poured... view more
Addonyl8108 is an approximately 70 % solution of an aliphatic polyisocyanate in N-Ethyl-2-pyrrolidone. Acts as a liquid activator. It enables short production intervals (demolding time under 10... view more
Applications
Addonyl®8112 is polyoxypropylene triamine. Acts as a liquid activator and is used during polymerization. It helps modifies the low-temperature impact strength of PA-6 G. The product is easily... view more
Applications
Addonyl®8120 is solid blocked diisocyanate. Acts as an activator during the production of Cast Nylon (PA-6 G). Due to the low proportion of the final material, it is mostly dust-free and enables... view more
Applications
Addonyl® Kat NL is an approximately 18.5 % solid solution of sodium caprolactamate in caprolactam. It has a weak characteristic odor. Acts as a catalyst during the production of Cast Nylon (PA-6 G)... view more
Lanxess
Addonyl® P is Aromatic polycarbodiimide. Acts as an activator during the production of Cast Nylon (PA-12 G or PA-6 12 G). With its use, a longer pouring time can be achieved. The product is easily... view more
Applications
Lanxess
Addonyl® TT is dimeric toluene-2.4-diisocyanate. Acts as an activator in cast nylon (PA-6 G) in order to extend the pouring time. Pyrogenous silicic acid (< 1%) is used as a fluxing agent. The... view more
Applications
Addovate3240 is polyglycol ester. Acts as a specialty emulsifier for the urea catalysis used to obtain low odor polyurethane polyester slabstock foam. Since it is only partially miscible with water... view more
Addovate390 is Polyether-modified polysiloxane. Acts as a stabilizer for the production of polyurethane rigid foams. Exhibits additional excellent emulsifying properties. Especially approved if... view more
Addovate® BA is an aqueous PUR dispersion. Acts as a bonding agent for improved adhesion of PUR rigid integral skin foam to metal surfaces. It is applied where improved adhesion between rigid... view more
Addovate® EM is a polyether polyol. Acts as an emulsifier for water, catalyst and the polyester polyol. Improves the open-cell structure of foams. Used in the low odor polyester flexible slabstock... view more
AddovateOM is amine salt of fatty acid. Acts as a dispersant for the production of polyurethane ester flexible slabstock foam. It is a brown liquid and miscible in water. When stored in firmly... view more
AddovateRM is a water-based emulsifier with catalyst. Acts as a dispersant for the production of polyester based flexible slabstock foam in combination with AddovateWM and AddovateSM. The amount of... view more
Addovate® SM is an aqueous solution of fatty acid sulfonate. Acts as an emulsifier/stabilizer for the production of polyurethane polyester flexible slabstock foam, rigid foam as well as a... view more
AddovateST is an aqueous solution of fatty acid sulfonate. Acts as an emulsifier/stabilizer for the production of special polyurethane polyester flexible slabstock foam. It has a shelf life of 6... view more
Addovate® SV is an aqueous solution of fatty acid sulfonate. Acts as an emulsifier and crosslinker for the production of cellular Vulkollan. The water component serves to promote the propellant... view more
Addovate® Thermostab is an aromatic ester of phosphoric acid. Acts as a sterically hindered antioxidant acting against thermo-oxidative degradation which may occur during processing as a result of... view more
AddovateTX is a prepation of sulphonated hydrocarbons. Acts as an emulsifier/stabilizer for the production of polyurethane polyester flexible slabstock foam. Before processing, ithas to be... view more
AddovateWM is a non-ionogenic emulsifier. Acts as a dispersant and emulsifier for the production of polyester based flexible slabstock foam. In general 1.0 - 2.0 p.b.w. of it should be added to 100... view more
Lanxess
Adimoll® BO is benzyl octyl adipate. Acts as a plasticizer. It is characterized by low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial... view more
Lanxess
Adimoll® DB is di-n-butyl adipate. Acts as a plasticizer. It is characterized by good compatibility with cellulose derivates. It is used as low-temperature-resistant plasticizer for melt processable... view more
Lanxess
Adimoll® DO is di-2-ethylhexyl adipate. Acts as a plasticizer. Exhibits low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial viscosity and... view more
Baymod® PU-A is aliphatic polyester urethane. Acts as a plasticizer. When mixed with PVC, it is oil, grease and solvent resistant, non-volatile, resistant to- abrasion and tear propagation... view more
Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Acts as a plasticizing polymer for improving the resistance of PVC to oil, grease, solvents and... view more
BioAdimide® 500 XT is aromatic carbodiimide. It is used to extend service life of bio-based polyesters and to improve their melt stability during processing. With its use, the molecular weight is... view more
Applications
Carbodiimide. Is an effective additive to prevent polymer degradation due to an exposure to humidity and acids. Helps maintain the molar mass and thus, mechanical properties as well as melt strength... view more
Carbodiimide. Is an effective additive to prevent polymer degradation due to an exposure to humidity and acids. Helps maintain the molar mass and thus, mechanical properties as well as melt strength... view more
BUTYL BENZOATE (dist.) acts as a plasticizer and solvent for cellulosic esters and ethers. It has a shelf life of at least 12 months... view more
Disflamoll® 51036 is a phosphate ester preparation. Acts as a low viscosity phosphate ester plasticizer with fast gelling in flexible PVC and good flexibility at low temperatures. It also acts as a... view more
DisflamollDPK is cresyl diphenyl phosphate (CDP). Acts as a highly effective flame retardant phosphate ester. Its flame retarding efficiency permits blending with standard plasticizers and so... view more
DisflamollDPO is 2-Ethylhexyl diphenyl phosphate (DPO). Acts as a low viscosity phosphate ester plasticizer with good gelling behaviour for flexible PVC. It acts also as a flame retardant in TPU... view more
Disflamoll® TKP is tricresyl phosphate (TCP). Acts as a plasticizer with fast gelling behavior for flexible PVC and good flame retarding characteristics in many polymers. It offers benefits like... view more
Disflamoll® TKP-P is tricresyl phosphate (TCP). Acts as a plasticizer with fast gelling behavior for flexible PVC and good flame retarding characteristics in many polymers. It offers benefits like... view more
Disflamoll® TOF is tris (2-ethylhexyl) phosphate (TOP). Acts as a plasticizer. It is also used as a solvent in the production of hydrogen peroxide, as a carrier for pigments in the manufacture of... view more
Disflamoll® TP is Triphenyl phosphate (TPP). Acts as a flame retardant. Compatible with cellulose acetate, cellulose acetate butyrate and vinyl copolymer compounds which are used in molding... view more
Disflamoll® TP liquid is triphenyl phosphate (TPP). Acts as a flame retardant. Compatible with cellulose acetate, cellulose acetate butyrate and vinyl copolymer compounds which are used in molding... view more
Disflamoll® TP LXS 51092 is butylated triphenyl phosphate. Acts as a flame retardant with good plasticizing efficiency. Compatible with flexible PVC and also polyurethanes and elastomers. It has a... view more
Triacetin is glycerintriacetate. Acts as a plasticizer. It exhibits good dissolving power for a number of organic substances, good plasticizing effect for various plastics such as cellulose acetates... view more
Levagard4090 N is N,N-bis-(2-hydroxylethyl) aminomethane phosphonic acid diethyl ester. Acts as a halogen-free reactive flame retardant. It is used in polymers which can undergo reactions with... view more
Applications
Levagard DMPP is dimethyl propane phosphonate (DMPP). Acts as a halogen free flame retardant with a very high phosphorus content and low viscosity. The flame retardant effect is excellent. The... view more
LevagardPP is tris (2-chloroisopropyl)-phosphate (TCPP). Acts as a halogen-based flame retardant of high efficiency. Compatible with polyurethanes, in particular PIR / PUR-rigid foams, as well as... view more
LevagardTEP-Z is triethyl phosphate (TEP). Acts as a halogen free phosphorus based flame retardant. It combines a high flame retardant efficiency with a low viscosity. Compatible with PIR / PUR... view more
Mersolat® H30 by Lanxess is a mixture of primarily secondary sodium alkyl sulfonates with an average chain length of C15. Acts as an antistatic agent. The product may also be applied to the surface... view more
Mersolat® H40 by Lanxess is a mixture of primarily secondary sodium alkyl sulfonates with an average chain length of C15. Acts as an antistatic agent. The product may also be applied to the surface... view more
Mersolat® H68 by Lanxess is a mixture of primarily secondary sodium alkyl sulfonates with an average chain length of C15. Acts as an antistatic agent. The product may also be applied to the surface... view more
Mersolat® H95 by Lanxess is a mixture of primarily secondary sodium alkyl sulfonates with an average chain length of C15. Acts as an antistatic agent. The product may also be applied to the surface... view more
Lanxess
Mesamoll® is alkylsulphonic acid ester with phenol. Acts as a general purpose plasticizer. It is characterized by a good compatibility with a large number of polymers, an excellent gelling capacity... view more
Mesamoll® 51067 is a mixture of alkylsulphonic phenyl ester (ASE). Acts as a general purpose plasticizer. It is characterized by an excellent compatibility with a large number of polymers, an... view more
Mesamoll® II is alkylsulphonic acid ester with phenol. Acts as general purpose plasticizer. It is characterized by a lower volatility than Mesamoll®, a good compatibility with a large number of... view more
Stabaxol® 1 LF is a monomeric carbodiimide. Acts as an anti-hydrolysis agent. It has distinctly reduced content of volatile components for polyester polymers (PET, PBT, TPE), polyamide... view more
StabaxolI Powder is monomeric carbodiimide. Acts as an antihydrolysis agent for polyester-polyurethane elastomers produced by hot casting process. It is normally being dissolved in the polyester... view more
Stabaxol® KE 7646 is used in PET-monofilaments for dryer-conveyor belts in paper making machines where it assists to multiply the service life time. For example by as much as three times after... view more
Stabaxol® KE 9193 is polycarbdiimide. Acts as an antihydrolysis agent for thermoplastic polyesters, especially for PBT. It is preferably added in a separate stream or dry blended with the polyester... view more
Lanxess
Stabaxol® P is an aromatic polycarbodiimide. Acts as an anti-hydrolysis agent. It is developed for millable urethane rubbers and thermoplastic polyester polyurethanes (TPU) as well as polyester... view more
Stabaxol® P 200 is a polymeric carbodiimide. Acts as an anti-hydrolysis agent. It is developed for hot casting polyester polyurethanes, polyurethane shoe-sole systems based on polyester polyols as... view more
Ultramoll® III is adipic acid polyester. Acts as a plasticizer. It helps impart good extraction resistance to oils, aromatic-free petrol, aliphatic hydrocarbons and bitumen owing to its high... view more
Ultramoll® IV is adipic acid polyester. Acts as a polymeric plasticizer. It offers good extraction resistance to oils, migration resistance in contact with other plastics, thermostability and... view more
Ultramoll® IV HV is adipic acid polyester. Acts as a polymeric plasticizer. It offers good extraction resistance to oils, migration resistance in contact with other plastics, thermostability and... view more
Ultramoll® IV MV is adipic acid polyester. It shows a good processibility because of its lower viscosity and the lower dissolution temperature. Compatible with a large number of polymers, e.g... view more
Ultramoll® V is adipic acid polyester. Acts as a polymeric plasticizer. It is migration-resistant and resistant to extraction by oil, aliphatic hydrocarbons and water. It is soft and flexible even... view more
Ultramoll® V HV is adipic acid polyester. Acts as a polymeric plasticizer. It is migration-resistant and resistant to extraction by oil, aliphatic hydrocarbons and water. It is soft and flexible... view more
Unimoll® AGF (RT) is mixture of glycerine acetates. Acts as a plasticizer. It was developed for plasticizing films which get in contact with food stuffs. It is used when regulations and... view more
Lanxess
Uniplex 108 is N-ethyl o/p-toluene sulphonamide. Acts as a plasticizer. Offers very good brilliance and gloss. Enhances adhesion, flexibility, and resistance to water, scuff, oils, and greases... view more
Lanxess
Uniplex 165 is a di-isobutyl adipate (DiBA). Acts as a plasticizer and solvent. It has a very low viscosity and a high volatility. Imparts low temperature flexibility to various polymers, with a... view more
Lanxess
Uniplex 171 is a o,p-toluene sulfonamide. Acts as a plasticizer. It is a mixture of ortho toluene sulfonamide (OTSA) and para toluene sulfonamide (PTSA). It imparts good gloss. Increases hardness... view more
Lanxess
Uniplex 214 is a N-butylbenzenesulfonamide (N-BSA). Acts as a plasticizer. It offers easier removal from molds, easier machining, better finishing, good heat stability to 80°C and better shape... view more
Lanxess
Uniplex 260 by Rhein Chemie Lanxess Group is a glyceryl tribenzoate. Acts as a plasticizer and processing aid. It promotes heat-sealability and adhesion, and creates a moisture barrier. It is... view more
Lanxess
Uniplex 262 is a 1,4-cyclohexanedimethanol dibenzoate. It is a non-phthalate dibenzoate plasticizer and modifier for a wide range of polymers. Improves overall performance properties here, i.e... view more
Uniplex 280CG is sucrose benzoate. Acts as a plasticizer. It is a clear, odorless, and non-crystalline brittle solid with a sharp softening range starting at around 93°C. It has excellent... view more
Lanxess
Uniplex 354 is 2,2,4 -Trimethylpentane-1,3-diol dibenzoate. Acts as a plasticizer. Compatible with a large number of polymers such as polyvinyl chloride (PVC), polyvinyl acetate (PVAc) and... view more
Lanxess
Uniplex 400 is a polypropylene glycol dibenzoate (PPGDB). It is a low volatility, moderately solvating benzoate plasticizer. It is an efficient alternative to higher alkyl benzyl phthalate... view more
Lanxess
Uniplex 50 is a mixed diethylene glycol dibenzoate and dipropylene glycol dibenzoate. Acts as a plasticizer. It is a good substitute to solvating phthalates like DBP and BBP. Exhibits resistance to... view more
Lanxess
Uniplex 512 by Rhein Chemie Lanxess Group is a neopentyl glycol dibenzoate. It is a low melting, waxy, solid plasticizer and processing aid. It has low volatility and a good ultraviolet light... view more
Lanxess
Uniplex 546 is a tris(2-ethylhexyl) trimellitate, TOTM. It is high molecular weight monomeric plasticizer having a low volatility. It is characterized by a low migration, heat resistance and high... view more
Uniplex 711 TM-E is a mixture of tri(C7-C11) Trimellitate, 1,2,4-Benzenetricarboxylic acid, mixed branched and linear heptyl and nonyl and undecyl esters. Acts as a plasticizer. It is characterized... view more
Lanxess
Uniplex 80 is a triethyl citrate (TEC). Acts as a plasticizer and solvent. Exhibits anti-corrosion properties. It does not promote fungal growth. It is compatible with a wide range of polymers and... view more
Lanxess
Uniplex 809 is a polyethylene glycol di-2-ethylhexanoate. It is a high molecular weight plasticizer and nucleating agent. It has low volatility. Offers excellent heat resistance, lower processing... view more
Lanxess
Uniplex 810 is a polyethylene glycol dilaurate. It is a high molecular weight plasticizer and nucleating agent. It has low volatility. Offers excellent heat resistance, lower processing cost... view more
Lanxess
Uniplex 82 is a light-fast citric acid ester acetyl triethyl citrate (ATEC). Acts as a plasticizer and solvent. It is compatible with a large number of polymers such as cellulosics [like cellulose... view more
Lanxess
Uniplex 83 is a tri-n-butyl citrate (TBC). Acts as a plasticizer. It has lower volatility loss, better resistance to yellowing and better adhesion to metals than those plasticized with dibutyl... view more
Lanxess
Uniplex 84 is a general purpose citric acid ester acetyl tributyl citrate (ATBC). Acts as a plasticizer. Shows high efficiency, good softening capacity and moderate gelling behaviour with a large... view more
Uniplex BAP-370 is Tris (tribromoneopentyl) phosphate. Acts as a solid flame retardant that it is melt processable. Based on its high bromine content it imparts efficient flame retardance to a... view more
Lanxess
Uniplex DBS is Di-butyl Sebacate. Acts as a plasticizer. It can also be used as a dispersant for pigments in various plastics. It has excellent compatibility with a range of polymers with superior... view more
Lanxess
Uniplex DIDS is Di-isodecyl Sebacate (DIDS). Acts as a plasticizer. It is low-volatile and combines good low temperature plasticizing performance and low volatility. Compatible with nitrile rubber... view more
Lanxess
Uniplex DOS is Di-(2-Ethylhexyl) Sebacate. Acts as a plasticizer. It exhibits an advantageous blend of properties such as an excellent low temperature flexibility combined with a low volatility. It... view more
Uniplex FRP-45 is Di-(2-ethylhexyl) tetrabromo phthalate. Acts as a flame retardant. It offers a very low volatility combined with a superior thermal and color stability. Due to its high bromine... view more
Uniplex FRP-45 IE is Di-(2-ethylhexyl) tetrabromo phthalate (bromine content is 45%). Acts as a flame retardant. It offers a very low volatility combined with a superior thermal and color stability... view more
Uniplex FRP-64 is poly (2,6-Dibromophenylene oxide). Acts as a flame retardant. It exhibits high chemical resistance combined with an excellent light stability. Compatible with thermoplastics such... view more
Uniplex FRP-64 P is poly (2,6-Dibromophenylene oxide). Acts as a solid flame retardant. It exhibits high chemical resistance combined with an excellent light stability. It is de-dusted with a... view more
Uniplex FRX 44-94 is a nitrogen (27%) and phosphorus (15.7%) blend. Acts as a flame retardant. The blend forms an intumescent layer under heat and fire exposure. It offers an excellent UV stability... view more
Uniplex FRX 44-94 S is a nitrogen (27%) and phosphorus (15.7%) blend. Acts as a flame retardant. The blend forms an intumescent layer under heat and fire exposure. It offers an excellent UV... view more
Lanxess
Mersolat® L by Lanxess is a secondary alkane sulfonate (with a higher n-paraffin content) based on n-paraffin. It is used for manufacturing emulsifiers. To obtain clear concentrates, it should be... view more
Addocat® 101 is N-methyl morpholine. Acts as a catalyst for polyester foams and co-catalyst for polyether foams. Used for the production of polyurethane foam, especially flexible slabstock foams... view more
Addolink3530 is a polyester polyol. Used to manufacture polyurethane elastomers, such as Baytec HC and Baytec LT. Recommended storage temperature is 15-30C. Shelf life is 12 months if stored in... view more
Addolink®THPE is 1,1,1-tris-(p-hydroxyphenyl)ethane. It is used for the production of branched polycarbonates. Branched polycarbonates with a pronounced pseudoplastic behavior can be obtained with... view more
Addovate® DD 1092 is a mixture of emulsifiers based on fatty acid ester. Acts as an emulsifier and defoamer. Used in the manufacture of cellular vulkollan... view more
Lanxess
Calcium salts of natural fatty acids in combination with amide ester waxes. Used as processing promoter for polymeric compounds, mainly based on EPDM and IIR. Offers improved dimensional stability... view more
Lanxess
Aflux® 18 by Rhein Chemie Lanxess Group is a primary fatty amine. Used as processing promoter especially suited for Acrylic rubbers like AEM, ACM. Aflux® 18 reduces tackiness/stickiness of rubber... view more
Applications
Lanxess
Combination of paraffine and fatty acids. Used as processing promoter for compounds based on synthetic rubber, e.g for specialty rubbers such as NBR, BIIR/CIIR etc and also used as lubricant for NR... view more
Lanxess
Blend of surface active substances with fatty acids. Used as processing promoter for tires and technical rubber goods containing compounds based on white polar fillers... view more
Lanxess
Water-free blend of fatty acids, fatty alcohols and fatty acid esters. Used as dispersing agent for fillers and rubber chemicals. Increases the plasticity of uncured compounds and improves the flow... view more
Lanxess
Anhydrous mixture of fatty alcohols and fatty acid esters. Used as dispersing agent and lubricant for compounds based on all synthetic rubbers, especially SBR, NBR, CR and EPDM for technical molded... view more
Lanxess
Mixture of pentaerythrityltri- and tetrastearate. Used as processing promoter for compounds based on synthetic rubber, especially CO, ECO and FPM. Reduces the sticking of the compounds to the mixing... view more
Lanxess
Blend of zinc salts of higher molecular unsaturated fatty acids. Used as peptizer for natural and isoprene rubber as well as for their blends with other synthetic rubbers. Offers prolonged scorch... view more
Metal complex in organic carrier material. Acts as a peptizing agent. It accelerates the mastication process leading to important energy and time savings. Incorporated very quickly and disperses... view more
Combination of zinc salts of unsaturated fatty acids with an activator. Acts as a peptizing agent and processing promoter. It activates the vulcanization, reduces mixing time and slightly delays... view more
Activated combination of zinc salts of saturated fatty acids. Acts as a processing promoter. It helps in reduction of viscosity and dispersion of fillers. Saves mixing energy and time. The... view more
Combination of zinc salts of selected, high molecular weight fatty acids with special activators and promoters. Acts as a processing aid. Reduces mixing cycle time. Also improves rheological... view more
Blend of zinc salts of higher molecular unsaturated fatty acids. Used as peptizer and processing promoter for elastomer compounds, tires, molded and extruded articles of all types, hard rubber... view more
Blend of hydrocarbons, Zn soaps and fillers. Used as dispersant, processing promoter and lubricant for highly filled synthetic diene rubber compounds. Offers improved filler dispersion and reduces... view more
Blend of hydrocarbons, Zn soaps and fillers. Used as dispersant and lubricant for highly filled synthetic diene rubber compounds; particularly suitable for compounds containing high-activity silica:... view more
Blend of selected paraffins and micro-waxes. Used as antiozonant and anti-sun check. Due to its reduced solubility, migrates to the surface of the vulcanizates and forms there a complete protective... view more
Antilux® 500 by Lanxess is a blend of selected paraffins and micro-waxes. It forms a continuous protective film. It is used in manufacturing of rubber, latex rubber and its additives... view more
Antilux® 600 by Lanxess is a mixture of selected paraffins and microwaxes with a narrow molecular weight distribution. It is suitable for technical molding and injection products. Offers protective... view more
Antilux® 654 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution. Acts as an antiozonant and protects rubber against weathering influences. It migrates... view more
Azo nickel complex based yellow colored pigment with a green cast. It is low-dusting. Recommended for coloring of PP fibers, polyamide and polyolefin... view more
Monoazo calcium complex based yellow colored pigment. It is low dusting. Recommended for polyamide only... view more
Applications
Synthetic iron oxide α - Fe2O3. It is a micronized iron oxide red pigment. Acts as high performance pigments and fulfills the higher requirements necessary in the paint and coating industry. The... view more
Synthetic iron oxide α-Fe2O3. It is a micronized iron oxide red pigment. Acts as high performance pigments. The product displays excellent dispersibility. As a result of the manufacturing process... view more
Synthetic iron oxide α - Fe2O3. It is a micronized iron oxide red pigment. The product displays excellent dispersibility. As a result of the manufacturing process (Laux-process), which includes a... view more
Synthetic iron oxide α - Fe2O3.It is a bluish iron oxide black pigment with very high tinting strength. It can be used in a wide variety of construction. In addition it is also applied in the... view more
Synthetic mixed iron and manganese oxide (Fe,Mn)2O3. It displays an extreme heat stability. It can be applied for the coloration of a wide variety of construction materials as well as in the... view more
BAYMOD® A 52 by Lanxess is an acrylonitrile butadiene styrene grafted copolymer. It is a highly effective modifier for improving notched impact strength and processability of rigid PVC. BAYMOD® A 52... view more
Applications
Acrylonitrile butadiene styrene graft polymer. Used as a PVC modifier in semi-rigid thermoformable sheeting. Exhibits very good toughness and very good thermoforming properties. Possesses favourable... view more
BAYMOD® L 2450 by Arlanxeo is an ethylene-vinyl acetate copolymer. Suitable for plastic- & rubber polymers and polymer auxiliaries... view more
Acrylnitrile-Styrene-copolymer. Used for polymer auxiliaries... view more
Methylstyrene-acrylonitrile copolymer. Improves the heat resistance of rigid PVC... view more
Bonding Agent® 2001 N by Rhein Chemie Lanxess Group is a formulation of a polyisocyanurate in dibutyl phthalate (DBP). Acts as a high performance, reactive, solvent-free one-component bonding agent... view more
Bonding Agent® 2005 by Rhein Chemie Lanxess Group is a formulation of a polyisocyanurate in n-butyl acetate. Acts as a high performance phthalate-free one-component bonding agent. Exhibits moderate... view more
Bonding Agent® 51030 by Rhein Chemie Lanxess Group is a formulation of a polyisocyanurate in n-butyl acetate. Acts as a high performance solvent-free one-component bonding agent. Exhibits moderate... view more
Bonding Agent® 51030 N by Rhein Chemie Lanxess Group is a formulation of a polyisocyanurate in n-butyl acetate. Acts as a high performance solvent-free one-component bonding agent. Possesses... view more
Bonding Agent® 51066 by Rhein Chemie Lanxess Group is an alkylsulphonic acid ester of phenols and polyiso-cyanurate. It is a preparation of a polyisocyanurate in Mesamoll® II. Acts as a high... view more
Bonding Agent® 51066 N by Rhein Chemie Lanxess Group is an alkylsulphonic acid ester of phenols and polyiso-cyanurate. It is a preparation of a polyisocyanurate in Mesamoll® II. Acts as a high... view more
Hexamethylolmelamine ether. Used for composites such as tires, conveyor belts, V-belts, hose, rubberized fabrics, and containers. Provides good adhesion between rubber and substrate... view more
Hexamethoxymethylmelamine ether. Used as adhesion promoter. Provides good adhesion between rubber and substrate. Enhances adhesion by physical and chemical interaction... view more
Applications
Mixture of hexamethyoxymethylmelamine ether and filler. Provides good adhesion between rubber and substrate... view more
Hexamethylene tetramine (HMT) with amorphous silica(about 3%)... view more
Mixture of 1/3 rescorinol, 1/3 hexamethoxymethylmelamine and 1/3 silica... view more
Lanxess
Resocinol derivative on filler in ratio 1:1... view more
Lanxess
Mixture of 45.5% rescorinol, 45.5% Cohedur A 100 and 9% butyl phthalate. Offers good adhesion between rubber and substrate... view more
Lanxess
Homogeneous solidified melt of resorcinol and stearic acid in the ratio 2:1... view more
Synthetic mixed iron and manganese oxide(Fe,Mn)2O3. It displays an extreme heat stability, since it is modified with a certain amount of manganese oxide incorporated into the crystal lattice. The... view more
Synthetic iron oxideFe2O3. It is a black iron oxide pigment with improved heat stability. The product exhibits good dispersibility, even in processes which have short dwell times and relatively low... view more
Synthetic mixed iron and manganese oxide (Fe,Mn)2O3. It is a reddish brown manganese ferrite pigment with improved heat stability. The product exhibits good dispersibility, even in processes which... view more
Synthetic Chromium Oxide Cr2O3. It acts as high performance special pigments. It is a heat stable, micronized chromium oxide green pigment. The product is also used for coloring plastics or... view more
Synthetic iron oxide α-Fe2O3. It is a heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low Copper and Manganese content... view more
Synthetic iron oxide α-Fe2O3. It is a heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and manganese content... view more
Synthetic iron oxide α-Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, bluish iron oxide red pigment. It belongs to the product range of high Performance Pigments. In addition, It is applied in the plastic industry in... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product exhibits good dispersibility, even in processes which have short dwell times and relatively low... view more
Synthetic iron oxide α -Fe2O3. It is a micronized, heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and... view more
Synthetic iron oxide α -Fe2O3. It is a heat stable iron oxide red pigment. The product is well suited to the coloring of plastics or masterbatches and exceptionally low copper and manganese content... view more
Sythetic iron oxide alpha FeOOH modified with Al-compounds. It is an iron oxide yellow pigment with improved heat stability. It achieves its high heat stability through an additional inorganic... view more
Sythetic zinc ferrite ZnFe2O4. It is a heat stable iron oxide yellow pigment. It has greater thermal stability. Maximum temperature stability can vary depending on the system into which the pigment... view more
Sythetic zinc ferrite ZnFe2O4. It has greater thermal stability. Maximum temperature stability can vary depending on the system into which the pigment is incorporated. The pigment belongs to the... view more
Desmodur®T 65 N is composed of two isomeric forms: 2.6-toluene-diisocyanate and 2.4-toluenediisocyanate. It is used for the production of polyurethanes. It has a shelf life of 6 months... view more
Disflamoll® 51092 by Lanxess is a butylated triphenyl phosphate. Acts as a flame retardant. It is a phosphate ester with good plasticizing efficiency and flame retardant characteristics in many... view more
Phosphate ester with high softening efficiency and good low temperature resistance. Acts as a flame retardant. Is recommended for use in PVC applications, especially for artificial leather, where... view more
Lanxess
Aromatic polyglycol ether. Used as an emulsifier for synthetic polymer latices... view more
Azodicarbonic acid diamide/p-toluene sulphohydrazide preparation. Used for the foaming of rubbers... view more
Applications
Azodicarbonic acid diamide preparation. Used for polymer auxiliaries... view more
Blowing agent. Used as a blowing agent. Requires less time for degassing... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent in low temperature PVC plastisol applications. Offers low temperature expansion. Exhibits increased efficiency and the line speed... view more
Azodicarbonamide preparation. Highly activated ADC formulation with a low decomposition temperature... view more
Sodium bicarbonate preparation. Used in extrusion processes of rigid PVC, where the use of azodicarbonic acid diamide is not possible. Developed for rigid PVC processing but also fits for the... view more
Lanxess
HATCOL® 200 is a high molecular weight primary plasticizer. Imparts good processing characteristics, high gloss and clarity along with good low temperature flexibility when used with PVC homopolymer... view more
Applications
Initiator BK by Lanxess is a formulation of an oligomeric benzopinacol silylether compound dissolved in approx. 30% triethyl phosphate and approx. 5% toluene. Acts as a polymerization initiator. It... view more
Aqueous emulsion of a medium viscosity silicone oil. Used as mold release agent. Possesses high gloss and pleasant feel... view more
Applications
Levagard® TP LXS 51114 by Lanxess is a phosphorus compound. Acts as a flame retardant. It is halogen-free and is characterized by low emissions (fogging) and low scorch. It is compatible with... view more
Anthraquinone dyestuff based blue colored pigment. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS/PC blends... view more
Anthraquinone dyestuff based blue colored pigment with a red cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS/PC blends... view more
Anthraquinone dyestuff based blue colored pigment with a red cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, ABS and ABS/PC blends... view more
Coumarin dyestuff based fluorescent red colored pigment with a yellow cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA and PC... view more
Coumarin dyestuff based fluorescent yellow colored pigment with a green cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PA 6, ABS and ABS/PC blends. For styrene-butadiene... view more
Anthraquinone dyestuff based green colored pigment with a blue cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS/PC blends. For styrene-butadiene block... view more
Anthraquinone dyestuff based green colored pigment with yellow cast. Recommended for transparent and opaque dyeing of PMMA, PC, PET, ABS and ABS/PC blends. For styrene-butadiene block copolymer, the... view more
Applications
Perinone dyestuff based orange colored pigment with a yellow cast. Recommended for transparent and opaque dyeing of PMMA, PS, PC, SAN, PA 6 and PA 6.6. For styrene-butadiene block copolymer, the use... view more
Methine dyestuff based orange colored pigment with a red cast. Recommended for transparent and opaque dyeing of PS, PET, ABS and ABS/PC blend. For styrene-butadiene block copolymer, the use of this... view more
Anthraquinone dyestuff based red colored pigment with a blue cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS, PA 6, PA 6.6 and ABS/PC blends. For styrene-butadiene... view more
Mixture of dyestuff. It is a red colored pigment with yellow cast. Recommended for transparent and opaque dyeing of PS, SAN, PMMA and PET. For styrene-butadiene block copolymer, the use of this dye... view more
Azo dyestuff based red colored pigment with a blue cast. Recommended for transparent and opaque dyeing of PS and PMMA. For styrene-butadiene block copolymer, the use of this dye is not recommended... view more
Perinone dyestuff based red colored pigment with a yellow stuff. It is low dusting. Recommended for transparent and opaque dyeing of PS, PC, PET, ABS and ABS / PC blends. For styrene-butadiene block... view more
Perinone dyestuff based red colored pigment with a yellow cast. It is low dusting. Recommended for transparent and opaque dyeing of PS, SAN, PET, ABS, PMMA, ABS / PC blends and PES fiber. For... view more
Azo dyestuff based red colored pigment with a blue cast. Recommended for transparent and opaque dyeing of PS, SAN, PET and PMMA. For styrene-butadiene block copolymer, the use of this dye is not... view more
Anthraquinone dyestuff based red colored pigment with a violet cast. Recommended for transparent and opaque dyeing of PS, SAN, ABS and ABS/PC blend. For styrene-butadiene block copolymer, the use of... view more
Anthraquinone dyestuff based violet colored pigment with a blue cast. It is low dusting. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS / PC blends. For... view more
Anthraquinone dyestuff based violet colored pigment with a red cast. It is low dusting. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS/PC blends. For... view more
Anthraquinone dyestuff based violet colored pigment with a blue cast. It is low dusting. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS/PC blends. For... view more
Pyrazolone dyestuff based yellow colored pigment with a green cast. Recommended for transparent and opaque dyeing of PMMA, PS, PC and SAN. For styrene-butadiene block copolymer, the use of this dye... view more
Methine dyestuff based yellow colored pigment with a green cast. Recommended for transparent and opaque dyeing of PC, PET, ABS and ABS/PC blends. For styrene-butadiene block copolymer, the use of... view more
Quinophthalone dyestuff based yellow colored pigment with a red cast. It is low dusting. Recommended for transparent and opaque dyeing of PC, PET, ABS and ABS/PC blends. For styrene-butadiene block... view more
Quinophthalone dyestuff based neutral yellow colored pigment. It is low dusting. Recommended for transparent and opaque dyeing of PS, SAN, PMMA, PC, PET, ABS and ABS / PC blends. For... view more
Mixture of alkylsulphonic phenyl ester. Acts as a general purpose plasticizer with good gelling behaviour. Is compatible with many types of polymers including PVC and polyurethanes. Has lower... view more
Porofor® ADC is a low-dust organic chemical blowing agent for the production of polymer foam that is used in polymer melts, rubber compounds and PVC plastisols. It is based on azodicarbonic acid... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent for the production of polymer foam. Offers improved free-flowing property... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent for the production of polymer foam. Offers very good cost/performance ratio. Used for the manufacture of articles which come into... view more
Mixture of toluene sulphonyl hydrazide (TSH) 75 %, paraffinic mineral oil 25 %... view more
Azodicarbonic acid diamide preparation. Used as a blowing agent for the production of polymer foam... view more
Toluene sulphonyl hydrazide. Used as a blowing agent... view more
Phthalimide-derivative. Used for the fungicidal treatment of plastics for technical applications, in particular plasticised PVC. Particularly effective against mould fungi which cause the... view more
Triazole-derivative. Used as fungicide for water-based and solvent-based wood preservatives. Particularly effective against wood-rotting basidiomycetes strains. Suitable for long-term protection... view more
Non-volatile, non-leachable benzimidazole-derivative. Used for the formulation of wood stains and plastics. Possesses heat resistance. Exhibits strong fungicidal efficacy against many species of... view more
Carbamate-derivative. Used in formulation of aqueous wood preservatives, anti-blue-stain agents, primers and wood stains. Particularly effective against blue-staining fungi and moulds... view more
Carbamate-derivative. Used in aqueous wood preservatives, anti-blue-stain agents, primers and wood stains. Particularly effective against blue-staining fungi and moulds... view more
Imidacloprid. Highly effective termiticide / insecticide for wood preservatives, wood composites and plastics. Possesses broad spectrum of activity. Outstandingly effective against termites such as... view more
2,2'-dibenzamidodiphenyldisulphide with activating additive and binder... view more
Lanxess
2,2'-dibenzamidodiphenyldisulphide with activating additive and binder... view more
2,2'-dibenzamidodiphenyldisulphide with activating additive and binder. Used as mastication agent. Possesses reduction of mastication times and dump temperature... view more
Applications
2,2'-dibenzamidodiphenyldisulphide with activating additive and binder... view more
o-tolyl biguanide, coated with mineral oil. Used as vulcanization accelerator for all rubbers with very slow scorch rates and relatively slow cure rates. Offers good mechanical properties and good... view more
Applications
Zinc chloride dibenzothiazyl disulphide compound. Used as curing agent for sulphur cross-linkable polyurethane rubbers... view more
N,N'-diphenyl thiourea. Acts as a vulcanizing accelerator. It causes a very rapid vulcanization in CR. It is also suitable as a secondary accelerator in self-curing CR compounds which contain... view more
3-methyl-thiazolidine-thione-2. Acts as a vulcanizing accelerator. It cures rubber without thiourea. Produces a high degree of crosslinking in a short period of time during vulcanization. It... view more
Di-ortho-tolylguanidine. Acts as a vulcanizing accelerator. It is a low-dusting and oil-damped powder. It is very easy to incorporate and disperses perfectly. It is an accelerator for all rubbers... view more
Cyclohexylethylamine. Acts as a vulcanizing accelerator. It is mild and is mainly used as a secondary accelerator. Offers easy incorporation and excellent dispersion. Used in compounds containing... view more
Vulcanizing agent for natural and synthetic rubbers. Used for tyres, conveyor belts, retreading material, assembled hoses, etc... view more
Zinc dimethyl dithiocarbamate (ZDMC). Acts as a vulcanizing accelerator. Provides a longer scorch time and a faster total curing time. Also offers very good tensile and resilience properties. It... view more
Zinc dibutyl dithiocarbamate (ZDBC). Acts as a vulcanizing accelerator. Provides a shorter scorch time and a slower total curing time. Also offers very good tensile and resilience properties. It... view more
Ethylene thiourea. Acts as a vulcanizing accelerator. Serves as an activator and secondary accelerator for systems containing little or no sulfur. Causes rapid and scorch-safe vulcanization of... view more
Zinc dialkyldithiophosphate. Acts as a vulcanizing accelerator. It is non-blooming, non-discoloring and economical. Can be used as a component in non-N-nitrosamine generating cure systems. It... view more
67% zinc dialkyl dithiophosphate bound to 33% silica. Acts as a vulcanizing accelerator. It causes a high degree of crosslinking. The free-flowing powder form of Rhenocure TP/S provides easy dosing... view more
Dimeric toluylene-2,4-diisocyanate. Used as crosslinking agent for isocyanate curable polyurethane rubber... view more
75% zinc dialkyl dithiophosphate bound to 25% high-activity silica. Acts as a vulcanizing accelerator. It is used in conjunction with sulfenamide, thiazole, thiuram, carbamate, and guanidines as a... view more
70 % zinc dialkyl dithiophosphate bound to 30 % high-activity silica. Acts as a vulcanization accelerator. It is free-flowing and non-staining. Highly soluble and disperses very well in all the... view more
Zinc-N-pentamethylene dithiocarbamate. Acts as a vulcanization accelerator. Exhibits reduced cure rates and improved processing safety. Offers good tensile strength and aging resistance. Used in... view more
Rhenodiv® BP-166 by Lanxess is an aqueous dispersion of mineral fillers. Acts as a release agent. It is 100% silicone-free single-release insides lubes. Rhenodiv® BP-166 single-release inside tire... view more
Rhenodiv® BP-3091 by Lanxess is an unfilled, aqueous formulation of partly crosslinkable silicone polymers. Acts as a release agent. Provides improved load-carrying capacity and lubricity... view more
Rhenodiv® BP-337 by Lanxess is an unfilled, water-based product containing silicones. Acts as a release agent. It is based on hydrogen-free crosslinking chemistry. Provides suitable lubricity and... view more
Rhenodiv® BP-9500 by Lanxess is an unfilled, silicone-free product based on glycol and vegetable oils. Acts as a release agent. Rhenodiv® BP-9500 single-release inside tire lube is water-based and... view more
Combination of urea- derivatives and dispersing agents in an aqueous paste form. Used as blow promoter in cellular, micro-cellular and sponge rubber. Offers a combination of scorch retarding and... view more
Combination of activating substances based on urea and surface-active agents, bound to highly reinforcing silica. Used as curing activator and promotor for the rubber articles of all kinds, which... view more
Fine particle sized magnesium oxide. Used as curing activator and acid acceptor particularly suitable for polychloroprene rubber (CR). Offers improved ageing properties of the vulcanizates... view more
Active magnesium oxide. Used as curing activator and acid acceptor particularly suitable for polychloroprene rubber (CR). Prevents scorching. Offers improved ageing properties... view more
Combination of activating substances based on amines, bound to highly reinforcing silica. Used as vulcanization activator and promoter for reinforcing fillers and in fast-curing mouldings, e.g... view more
70 % 1,4-butandioldimethacrylate (BDMA) and 30 % silica. Acts as a vulcanization activator. Provides higher degree of polymer crosslinking. Shows partly increased hardness, higher moduli... view more
Specially treated, finely divided calcium hydroxide. Used as crosslinking activator for fluoro-elastomers and in technical rubber articles, such as seals of all kinds. Offers very good storage... view more
Highly active magnesium oxide. Used as vulcanization activator and acid acceptor for technical mouldings and injection mouldings, rubber curing bags for tyres, roofing sheets, etc. Improves the... view more
Diphenylamine derivative. Used as antioxidant for bicycle tyres, inner tubes, sponge rubber, footwear sole (particulary expanded rubber soles). Offers protection against heat and oxygen... view more
Combination of diphenylamine derivative and silica filler. Used as antioxidant in bicycle tyres, inner tubes, sponge rubber, footwear sole(particularly expanded rubber soles). Prevents damage by... view more
Rhenofit® EDMA/S by Rhein Chemie (Lanxess Group) is 70% ethylene glycol dimethacrylate (EDMA) and 30 % silica. Acts as an activator for peroxide vulcanization... view more
Fatty acid amide with amino groups. Used as accelerator activator. Provides good physical properties and problemfree complete demoulding of vulcanizates... view more
Octylated diphenylamine. Used as an antioxidant for bicycle tyres, inner tubes, sponge rubber, footwear sole (particulary expanded rubber soles). Offers protection against heat and oxygen in CR... view more
Phenyl-a-naphthylamine. Used as an antioxidant for natural and synthetic rubber particularly for articles subjected to heavy dynamic stressing, e.g. tyres, conveyor belts, transmission belts and... view more
70 % triallyl cyanurate bound to 30 % silica. Used as vulcanization activator. Offers higher hardness, higher moduli and tensile strengths as well as improved abrasion resistance. Exhibits no real... view more
70 % trimethylolpropane trimethacrylate and 30 % silica. Acts as a vulcanization activator. Provides higher degree of polymer crosslinking. Shows increased hardness, higher moduli, outstanding... view more
Organic zinc salt. Used as blowing agent for cellular rubber and plastic articles of all kind... view more
Applications
Blend of 50 % amine dialkyldithiophosphate, 50 % silica and elastomer binder. Acts as a vulcanizing accelerator. It is non-staining. Exhibits high tensile strength. It allows quick absorption and... view more
40% aramid fiber pulp predispersed in 60% EPDM polymeric binder with dispersing agents. Acts as a reinforcing agent. It improves elasticity modulus, modulus at low strain, compression resistance... view more
Combination of 40 % metal chlorides, 60 % elastomer binder (IIR) and dispersing agents. Acts as a vulcanization activator. It is predispersed in butyl rubber. Offers rapid absorption and excellent... view more
Mixture of 80% 2,2'-methylene-bis-(4-methyl- 6-tert.butylphenol), 20 % elastomer binder and dispersing agents. Acts as an antioxidant. It is non-staining. Protects rubber articles from oxygen, heat... view more
N-cyclohexyl-2-benzothiazylesulphenamide. Used as an accelerator for the vulcanization of natural and synthetic rubbers, in treads, air hoses, conveyor belts, footwear and other technical articles... view more
Blend of 80 % caprolactam disulfide (techn.), 20 % elastomer binder and dispersants. Acts as a vulcanizing accelerator... view more
Mixture of 80% N-(cyclohexylthio)- phthalimide and 20 % elastomer binder and dispersing agents. Used as pre-vulcanization inhibitor for natural and synthetic rubbers. Improves the storage stability... view more
Calcium oxide. Used as desiccant for rubber compounds and extruded articles(profiles, seals), belts, straps, conveyor belts, rollers, cable coverings, rubber floorings. Possesses quick absorption... view more
N,N'-diethylthiourea. Used as an accelerator for the very rapid vulcanization of chloroprene rubber. Offers good ageing resistance and mechanical properties... view more
Di-ortho-tolylguanidine. Used as an accelerator for the vulcanization of natural and synthetic rubbers. Also suitable for technical articles (especially thick-walled ones), band tyres, buffers... view more
N,N'-diphenylguanidine. Used as an accelerator for the vulcanization of natural and synthetic rubbers. Provides a very long scorch time and a relatively slow full cure... view more
Rhenogran® DPTT 70 by Lanxess is a composition of 70% dipentamethylene thiuram tetrasulphide and 30% elastomer binder and dispersing agents. Acts as an ultra accelerator for very rapid and... view more
N,N'-diphenylthiourea. Used as secondary accelerator for CR, EPDM and other diene rubbers. Offers high degree of cross-linking with little sulphur... view more
Blend of 80 % Diuron [N'-(3, 4-dichlorophenyl)-N, N-dimethyl urea], 20 % acrylate binder and dispersing agents. Acts as a crosslinking agent. Used together with alkali soaps such as sodium or... view more
Synergetic accelerator combination. Used as an accelerator for the rapid vulcanization of compounds based on EPDM, technical rubber articles of all kinds, based on EPDM, particulary extruded... view more
N,N'-ethylene-thiourea. Used as an accelerator for rapid vulcanization of chloroprene rubber and other diene rubbers. Offers good ageing and mechanical properties... view more
Channel Alerts

Receive weekly digests on hot topics

Back to Top