OK
The material selection platform
Polymer Additives
The material selection platform
Polymer Additives
by SpecialChem
Share Feedback
 
Save
Cette page a bien été ajoutée à vos favoris
View all pages saved
CONTINUE BROWSING
REFINE YOUR SEARCH
( active filters)

Dabco®

Polymers additives supplied by Evonik

Dabco® is a portfolio of amine catalysts by Evonik. These are important to balance various reactions during polyurethane foam formation. Choosing the right amine helps reduce foam defects and can influence physical characteristics and quality of the final foam.

Dabco® grades can be customized to meet customer’s demands such as:

  • Delayed activity
  • Strong-back end curing to improve structural stability
  • Adhesion in specific formulations

Explore related brands from Evonik: TEGOAMIN®, Polycat®


Other applications: Dabco® brand for Adhesives, Coatings
168 products match your search
Detailed List
Product Name
Supplier
Description
Dabco® 1027
Evonik
Dabco® 1027 by Evonik acts as a catalyst. It improves flowability while maintaining fast demolding. It exhibits good back-end cure and increased processing flexibility. It is highly reactive and... view more
Applications
Dabco® 1028
Evonik
Dabco® 1028 by Evonik is an amine catalyst. It improves the cream time and provides improved flowability while maintaining fast demolding. It is highly reactive and selective towards the urethane... view more
Applications
Dabco® 1030
Evonik
Dabco® 1030 by Evonik is a highly reactive amine catalyst by Evonik. It is selective towards the urethane reaction. It reduces demold time while having similar cream time to traditional amine... view more
Applications
Dabco® 2021
Evonik
Dabco® 2021 by Evonik is polyurethane catalyst by Evonik. Offers very good processing latitude and increased hardness. Used specifically for low density conventional and HLB flexible slabstock... view more
Applications
Dabco® 2033
Evonik
Dabco® 2033 by Evonik is a catalyst based on optimized tertiary amine. Offers broad processing latitude in the production of flexible slabstock polyurethane foam. Increases bun height at critical... view more
Applications
Dabco® 2035
Evonik
Dabco® 2035 by Evonik is a hardener. Used in flexible polyether slabstock foams... view more
Applications
Dabco® 2039
Evonik
Dabco® 2039 by Evonik is amine catalyst. Used to promote the urethane (polyol isocyanate) reaction. It has low VOC/fogging values. It is a low odor alternative to morpholine based amines in flexible... view more
Applications
Dabco® 2040
Evonik
Dabco® 2040 by Evonik is a low odor amine catalyst. It has a smooth rise profile. It enhances cure and adhesion to substrate in a variety of flexible as well as rigid polyurethane foams. It is... view more
Applications
Dabco® 25-S
Evonik
Dabco® 25-S by Evonik acts as a catalyst. It is used in the synthesis of prepolymers and curing of polyurethanes... view more
Applications
Dabco® 3040
Evonik
Dabco® 3040 is a mild balanced amine catalyst by Evonik. It works well in different kind of iso system like TDI, T/M, M/T and MDI systems. Exhibits excellent surface curing at lower mold temperature... view more
Applications
Dabco® 33-LV
Evonik
Dabco® 33-LV by Evonik acts as catalyst. It is used in the synthesis of prepolymers and curing of polyurethanes... view more
Applications
Dabco® 8154
Evonik
Dabco® 8154 by Evonik is a blocked tertiary amine catalyst. It offers improved curing of the foam. It does not prolong the demold times. It promotes the urethane (polyol-isocyanate) reaction... view more
Applications
Dabco® B-16
Evonik
Dabco® B-16 by Evonik is amine catalyst. Used in polyester die cuttable flexible slabstock foams, integral skin and microcellular systems. Dabco® B-16 provides improved surface cure... view more
Applications
Dabco® BA150
Evonik
Dabco® BA150 by Evonik is a non-emissive, hydrolytically stable blocking agent. It is used to delay the catalyst reaction and to improve flow while maintaining back end cure. Its components are all... view more
Applications
Dabco® BA201
Evonik
Dabco® BA201 by Evonik acts as a processing aid. Provides front-end delay while increasing back-end cure. It improves surface cure and increase the stiffness of PIR boards. Used for all polyether... view more
Applications
Dabco® BA305
Evonik
Dabco® BA305 by Evonik acts as a catalyst. It is compatible with other commonly used polyurethane catalysts and additives. It can be used in combination with Dabco® NE1090 non emissive gel catalyst... view more
Applications
Dabco® BDMA
Evonik
Dabco® BDMA by Evonik is benzyldimethylamine catalyst. It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It is also used for... view more
Applications
Dabco® BL-11
Evonik
Dabco® BL-11 by Evonik is an active amine catalyst. It is designed for all types of flexible foam and extrusion blow molding applications. It is suitable for thermoplastic polyurethane... view more
Applications
Dabco® BL-13
Evonik
Dabco® BL-13 by Evonik is a catalyst based on (2-dimethylamino ethyl) ether. Used in flexible foams. Dabco® BL-13 is designed for extrusion blow molding... view more
Applications
Dabco® BL-17
Evonik
Dabco® BL-17 by Evonik is a delayed-action catalyst. Used in energy absorbing non-recoverable rigid foams. Dabco® BL-17 is suitable for thermoplastic polyurethane and extrusion blow molding... view more
Applications
Dabco® BL-19
Evonik
Dabco® BL-19 by Evonik is a catalyst based on bis(2-dimethylamino ethyl) ether. It is a tertiary amine that primarily promotes the urea (water-isocyanate) reaction. Dabco® BL-19 is suitable for... view more
Applications
Dabco® BLV
Evonik
Dabco® BLV by Evonik is a blend of blowing and gelling amine catalyst. Used in flexible slabstock foams and extrusion blow molding applications. Dabco® BLV offers superb catalytic activity... view more
Applications
Dabco® BP52
Evonik
Dabco® BP52 by Evonik is a flame lamination agent. It features low viscosity for easy handling and incorporation into the foam formulation. Offers excellent adhesion of the foam to the substrate... view more
Applications
Dabco® BX405
Evonik
Dabco® BX405 by Evonik is a high efficiency amine catalyst. Shows better post-curing performance than DMCHA and catalytic activity equivalent to DMCHA. It strongly catalyzes the reaction of polyol... view more
Applications
Dabco® CS90
Evonik
Dabco® CS90 by Evonik is a tertiary amine catalyst by Evonik. Offers increased foam softening... view more
Applications
Dabco® Crystalline
Evonik
Dabco® Crystalline by Evonik is a crystalline, 100% solid triethylene diamine (TEDA)-based catalyst with high-purity. Used in all types of polyurethane foams including flexible slabstock, flexible... view more
Applications
Dabco® DC 3043
Evonik
Dabco® DC 3043 is a blowing agent by Evonik. It is silicone glycol copolymer for use in shoe soles. Dabco® DC 3043 is suitable for TPU applications... view more
Applications
Dabco® DC1
Evonik
Dabco® DC1 by Evonik is a catalyst that provides strong gelling and back end cure by promoting the urethane (polyol-isocyanate) reaction while delaying initiation as well as providing long pot life... view more
Applications
Dabco® DC193
Evonik
Dabco® DC193 by Evonik is a silicone surfactant with improved foam formation. It provides excellent flame retardant properties. It possesses good compatibility with most common polyol premixes and... view more
Applications
Dabco® DC198
Evonik
Dabco® DC198 by Evonik acts as an emulsifier. It is a high-potency silicone glycol copolymer with high efficiency. Provides good stability in both water and amine premixes. Dabco® DC198 is used in... view more
Applications
Dabco® DC2
Evonik
Dabco® DC2 by Evinik is a catalyst that provides delayed reaction initiation while maintaining a strong back end cure. It promotes the urethane (polyol-isocyanate) reaction in flexible molded... view more
Applications
Dabco® DC2525
Evonik
Dabco® DC2525 by Evonik acts as a silicone stabilizer and emulsifier. Used in cold cure flexible molded MDI and MDI/TDI polyurethane systems. Dabco® DC2525 is suitable for processing by extrusion... view more
Applications
Dabco® DC2584
Evonik
Dabco® DC2584 by Evonik is a high efficiency surfactant and foaming agent. Designed for flexible molded foam applications, MDI and MDI/TDI cold cure systems. It has a low fogging potential... view more
Applications
Dabco® DC2585
Evonik
Dabco® DC2585 is a silicone surfactant and emulsifier by Evonik. Offers very good vent stability and has the ability to eliminate basal cell formation. Possesses low VOC and fogging values and... view more
Applications
Dabco® DC3042
Evonik
Dabco® DC3042 by Evonik acts as a surfactant. It is a bulk stabilizing silicone glycol copolymer designed for use with all polyester and polyether microcellular applications. Possesses a fine... view more
Applications
Dabco® DC3043
Evonik
Dabco® DC3043 by Evonik is a surface-stabilizing surfactant. It provides fine, uniform cell size distribution, good surface quality, and good dimensional stability in normal and lower-density shoe... view more
Applications
Dabco® DC5000
Evonik
Dabco® DC5000 by Evonik acts as a foaming agent. It is a non-hydrolysable silicone glycol copolymer suitable for TPU applications... view more
Applications
Dabco® DC5043
Evonik
Dabco® DC5043 by Evonik is a low viscosity emulsifier based on a silicone glycol copolymer. Used in high-resiliency flexible polyurethane foams. Provides non-hydrolyzable bonding and is suitable for... view more
Applications
Dabco® DC5098
Evonik
Dabco® DC5098 by Evonik is a non-hydrolyzable silicone emulsifier by Evonik. Used in rigid polyurethane and polyisocyanurate foam. Dabco® DC5098 offers very good dimensional stability... view more
Applications
Dabco® DC5103
Evonik
Dabco® DC5103 by Evonik acts as a silicone surfactant. Offers very good emulsification properties. It is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5160
Evonik
Dabco® DC5160 by Evonik acts as a foaming agent. It is based on silicone glycol. Provides medium to high efficiency. Dabco® DC5160 is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5164
Evonik
Dabco® DC5164 by Evonik is a high-efficiency silicone surfactant. Used for cold cure flexible molded polyurethane foam systems. Suitable for extrusion blow molding applications. Offers very good... view more
Applications
Dabco® DC5179
Evonik
Dabco® DC5179 by Evonik is a surfactant based on a non-hydrolysable silicone. Provides very good vent stability. Dabco® DC5179 is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5188
Evonik
Dabco® DC5188 by Evonik is a high efficiency silicone stabilizer by Evonik. Acts as a foaming agen for polyether flexible slabstock formulations. Dabco® DC5188 is suitable for TPU resin... view more
Applications
Dabco® DC5258
Evonik
Dabco® DC5258 by Evonik acts as an emulsifier based on silicone glycol. Used in a variety of cold cure flexible molded and semi-flexible polyurethane foam systems. Suitable for thermoplastic... view more
Applications
Dabco® DC5350
Evonik
Dabco® DC5350 by Evonik acts as a silicone surfactant. Provides a good balance of stabilization and open cells. Imparts improved performance in flammability testing. Dabco® DC5350 offers good foam bulk... view more
Applications
Dabco® DC5357
Evonik
Dabco® DC5357 by Evonik is non-hydrolyzable silicone emulsifier. Used for water co-blown rigid polyurethane foams and extrusion blow molding applications. Offers very good foam flowability and... view more
Applications
Dabco® DC5526
Evonik
Dabco® DC5526 by Evonik is a foaming agent and silicone stabilizer by Evonik. Used in polyester flexible slabstock foam and thermoplastic polyurethane... view more
Applications
Dabco® DC5585
Evonik
Dabco® DC5585 by Evonik acts as a silicone surfactant. Offers superior thermal properties, excellent foam flow, competitive cost in use and fine as well as closed cell structure. Dabco® DC5585 is used... view more
Applications
Dabco® DC5598
Evonik
Dabco® DC5598 by Evonik is a non-hydrolyzable emulsifier. Used in rigid polyurethane & polyisocyanurate foam and extrusion blow molding applications. Offers good compatibility with common rigid foam... view more
Applications
Dabco® DC5604
Evonik
Dabco® DC5604 by Evonik is a non-hydrolyzable emulsifier based on silicone glycol copolymer. Used in producing rigid PUR and PIR foams. Offers an ideal balance of processing and performance... view more
Applications
Dabco® DC5810
Evonik
Dabco® DC5810 by Evonik is a high-efficiency surfactant. Provides good nucleation, a high degree of emulsification and good bulk stability. It produces foams with fine as well as uniform cell... view more
Applications
Dabco® DC5900
Evonik
Dabco® DC5900 by Evonik acts as a foaming agent. Dabco® DC5900 offers improved emulsification within the foam system... view more
Applications
Dabco® DC5901
Evonik
Dabco® DC5901 by Evonik is a foaming agent. Exhibits a high degree of emulsification. Dabco® DC5901 provides very good froth stability and good bulk stability... view more
Applications
Dabco® DC5906
Evonik
Dabco® DC5906 by Evonik acts as a foaming agent. Used as a foam stabilizer in flexible polyether slab stock foam... view more
Applications
Dabco® DC5933
Evonik
Dabco® DC5933 by Evonik acts as a surfactant. Provides good nucleation, a high degree of emulsification and good bulk stability to produce foams with fine as well as uniform cell structure. Offers... view more
Applications
Dabco® DC5950
Evonik
Dabco® DC5950 by Evonik acts as an emulsifier. Offers improved performance through its ability to emulsify incompatible components. Dabco® DC5950 is suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5986
Evonik
Dabco® DC5986 by Evonik acts as a surfactant. Provides good nucleation, high degree of emulsification, excellent froth stability and good bulk stability to produce foams with uniform cell structure... view more
Applications
Dabco® DC5987
Evonik
Dabco® DC5987 is a high-efficiency surfactant by Evonik. Provides good nucleation, high degree of emulsification, excellent froth stability and good bulk stability to produce foams with uniform cell... view more
Applications
Dabco® DC5990
Evonik
Dabco® DC5990 is a high efficiency, non-hydrolyzable surfactant by Evonik. It can provide good nucleation, a high degree of emulsification, excellent froth stability and good bulk stability to... view more
Applications
Dabco® DC5LE
Evonik
Dabco® DC5LE by Evonik acts as an accelerator. It is a low emission delayed action co-catalyst that strongly promotes the urethane (polyol-isocyanate) reaction while maintaining cream time and... view more
Applications
Dabco® DC6070
Evonik
Dabco® DC6070 by Evonik acts as an emulsifier. Possesses ability to eliminate basal cell formation in difficult-to-mold tooling. Offers excellent foam surface appearance and vent stability as well... view more
Applications
Dabco® DMDEE
Evonik
Dabco® DMDEE by Evonik is an amine blowing catalyst. It is 100% dimorpholinyldiethylether (DMDEE). Used in rigid foam sealant systems as well as for flexible slabstock foams. Dabco® DMDEE is suitable... view more
Applications
Dabco® EG
Evonik
Dabco® EG by Evonik is an amine-based catalyst. Used in polyurethane formulations. Dabco® EG possesses strong gelation catalysis... view more
Applications
Dabco® JXP508
Evonik
Dabco® JXP508 by Evonik is a highly efficient amine catalyst. Based on its trimerization capability, it could provide very good post-curing to foam. Improves adhesion strength of foam to substrate... view more
Applications
Dabco® K-15
Evonik
Dabco® K-15 by Evonik acts as a cost-effective isocyanurate catalyst. It is used in the production of rigid isocyanurate foams. Dabco® K-15 provides high conversion rate... view more
Applications
Dabco® K-15LV
Evonik
Dabco® K-15LV by Evonik acts as a catalyst. Its low viscosity facilitates ease of pumping at low temperatures. It is cost-effective and offers high conversion rate. Dabco® K-15LV promotes the... view more
Applications
Dabco® K2097
Evonik
Dabco® K2097 by Evonik is a standard trimerization catalyst. Used for rigid foam applications. Dabco® K2097 is suitable for thermoset PU resin... view more
Applications
Dabco® LK-221
Evonik
Dabco® LK-221 by Evonik is a unique organic surfactant for microcellular and rigid foam formulations. Provides a smooth surface and excellent adhesion. Can be used as a replacement or co-surfactant... view more
Applications
Dabco® LK-443
Evonik
Dabco® LK-443 by Evonik is a unique organic surfactant for use in rigid polyurethane applications to provide a smooth surface. It can be used as a replacement or co-surfactant for silicone-based... view more
Applications
Dabco® MB20
Evonik
Dabco® MB20 by Evonik acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting... view more
Applications
Dabco® MP601
Evonik
Dabco® MP601 by Evonik is a delayed action, balanced tertiary amine catalyst. It is developed for fast demold high resiliency (HR) molded foam systems. Provides effective balanced reactions with... view more
Applications
Dabco® MP602
Evonik
Dabco® MP602 by Evonik is a delayed non-emissive amine catalyst. It promotes the urethane (polyol-isocyanate) reaction. It was developed for use in cold cure and hot cure flexible molded... view more
Applications
Dabco® MP608
Evonik
Dabco® MP608 by Evonik acts as a delay balance amine catalyst. It works well in TDI, T/M, M/T and MDI systems. It delays cream time with fast post curing and effectively balances reactions with... view more
Applications
Dabco® NCM
Evonik
Dabco® NCM by Evonik is n-cocomorpholine- based catalyst. Used for polyester slabstock foams... view more
Applications
Dabco® NE 400
Evonik
Dabco® NE 400 is a novel non-emission (NE) catalyst by Evonik. Used in the production of polyester slabstock foam... view more
Applications
Dabco® NE1070
Evonik
Dabco® NE1070 by Evonik is a non-emissive amine catalyst. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible foam applications to meet automotive... view more
Applications
Dabco® NE1090
Evonik
Dabco® NE1090 by Evonik acts as a novel non-fugitive gelling catalyst. It has the ability to react chemically into the polyurethane foam matrix, thereby it do not contribute to emissions. Exhibits... view more
Applications
Dabco® NE210
Evonik
Dabco® NE210 is a balanced non-emissive amine catalyst by Evonik. Offers no amine catalyst emissions, no VOC emissions, no vinyl staining and no windshield fogging. Possesses master batch stability... view more
Applications
Dabco® NE300
Evonik
Dabco® NE300 by Evonik is a non-emissive amine catalyst. Promotes the urea (water isocyanate) reaction. It possesses master batch stability. It reacts into the polyurethane matrix, thereby not... view more
Applications
Dabco® NE310
Evonik
Dabco® NE310 is a non-fugitive, non-emissive reactive amine catalyst by Evonik. Provides good resin-side stability. Compatible with other commonly used polyurethane catalysts and additives. Promotes... view more
Applications
Dabco® NE320
Evonik
Dabco® NE320 by Evonik is a high purity, fourth generation no-emission (NE) blow catalyst by Evonik. It binds chemically into the polyurethane foam matrix while maintaining foam properties in MDI... view more
Applications
Dabco® NE500
Evonik
Dabco® NE500 by Evonik acts as a non-emissive amine catalyst. It is used in flexible slabstock applications to meet Certipur® or LGA requirements. Shows equivalent foam physical properties, master... view more
Applications
Dabco® NE600
Evonik
Dabco® NE600 is a balanced non-emissive amine catalyst by Evonik. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible slabstock applications to meet... view more
Applications
Dabco® PE40
Evonik
Dabco® PE40 by Evonik acts as a processing aid. It is an excellent melamine stabilizer. It allows solid powder to well stabilize in polyols when pre-mixing solid powders and polyols especially in... view more
Applications
Dabco® PM300
Evonik
Dabco® PM300 by Evonik is a blowing agent enhancer. It significantly reduces the level of conventional surfactant required. It produces fine uniform cells and reduces polyol side viscosity. Improves... view more
Applications
Dabco® PM301
Evonik
Dabco® PM301 by Evonik acts as a surfactant. Designed to improve the efficiency of blowing agents used in rigid polyurethane foam, in particular spray foam. Offers a reduction in the use level of... view more
Applications
Dabco® PT302
Evonik
Dabco® PT302 by Evonik is a high efficiency tertiary amine catalyst. It can be used in rigid foam applications, especially rigid spray foam. Dabco® PT302 strongly catalyzes the reaction of polyol... view more
Applications
Dabco® PT303
Evonik
Dabco® PT303 by Evonik is a high efficiency tertiary amine catalyst. It strongly catalyzes the urea (water-isocyanate) reaction for rigid spray polyurethane foam... view more
Applications
Dabco® PT304
Evonik
Dabco® PT304 by Evonik is a high efficiency amine, medium trimer catalyst. It can improve post cure and adhesion strength. Dabco® PT304 can be used in rigid spray foam... view more
Applications
Dabco® PT305
Evonik
Dabco® PT305 by Evonik is a reactive amine catalyst. Offers improved post-cure, dimensional stability and lower odor. Used for rigid polyurethane foam... view more
Applications
Dabco® PT306
Evonik
Dabco® PT306 by Evonik acts as a highly efficient gelling amine catalyst. Provides better foam density distribution. It is developed for reducing hydrolysis and improving system stability... view more
Applications
Dabco® RP202
Evonik
Dabco® RP202 by Evonik is a non-emissive balanced amine catalyst. It binds chemically into the PU foam matrix eliminating contributions to odor and VOC emissions. It increases the airflow, improves... view more
Applications
Dabco® RP203
Evonik
Dabco® RP203 by Evonik acts as a balanced tertiary amine catalyst. Provides excellent performance in methylene chloride-blown flexible slabstock foams. Compatible with other blowing agents. It... view more
Applications
Dabco® RP204
Evonik
Dabco® RP204 by Evonik is a non-emissive amine catalyst promoting a balance of urethane and urea reactions with high efficiency and wide processing latitude. Possesses excellent foam stability that... view more
Applications
Dabco® RP205
Evonik
Dabco® RP205 by Evonik acts as an amine catalyst. Used in making low-density flexible slab stock foam that can provide wide process latitude... view more
Applications
Dabco® S-25
Evonik
Dabco® S-25 is an amine catalyst by Evonik. It is a solution of 25% triethylenediamine (TEDA) and 75% butanediol. Acts as a strong urethane catalyst that is commonly used for shoe sole applications... view more
Applications
Dabco® SCOBA AS45
Evonik
Dabco® SCOBA AS45 is a liquid antioxidant system by Evonik. Used in polyether and polyester flexible slabstock applications... view more
Applications
Dabco® SI1103
Evonik
Dabco® SI1103 surfactant by Evonik is a silicone stabilizer. It has been developed especially for systems characterized by self-supporting performance, where cell regulation is critical. Typical... view more
Dabco® SI1301
Evonik
Dabco® SI1301 surfactant by Evonik is a low emission cell regulator. It is typically combined with a strong bulk stabilizer. This dual surfactant approach offers improved formulating latitude for... view more
Applications
Dabco® SI1303
Evonik
Dabco® SI1303 by Evonik acts a low VOC and low fogging medium efficiency silicone surfactant. Also acts as a bulk stabilizer for cold cure MDI and MDI-TDI-based systems. It is developed for cold... view more
Applications
Dabco® SI1304
Evonik
Dabco® SI1304 by Evonik is a low VOC and low fogging medium efficiency silicone surfactant. Possesses excellent surface stability as well as excellent vent stability and excellent foam surface... view more
Dabco® SI2301
Evonik
Dabco® SI2301 by Evonik is a silicone surfactant. Exhibits low VOC emissions that enable to meet Certipur®, OEKO-TEX® or LGA-tested for contaminants emission requirements for flexible slabstock... view more
Dabco® SI2302
Evonik
Dabco® SI2302 by Evonik is a silicone surfactant. Provides optimum balance of stabilizing and cell regulating and produces open cell foam. Exhibits very low VOC emissions that enable to meet... view more
Dabco® SI3101
Evonik
Dabco® SI3101 by Evonik is a silicone surfactant. Possesses excellent foam surface quality with reduced voids. It is a non-hydrolysable structure for excellent premix stability, good compatibility... view more
Dabco® SI3102
Evonik
Dabco® SI3102 by Evonik is a silicone surfactant. Provides very efficient emulsification, nucleation and stabilization, resulting in fine, uniform foams with excellent insulation properties... view more
Applications
Dabco® SI3201
Evonik
Dabco® SI3201 by Evonik acts as a silicone surfactant. Provides very efficient emulsification, nucleation and stabilization, resulting in fine as well as uniform foams with excellent insulation... view more
Applications
Dabco® SI3202
Evonik
Dabco® SI3202 by Evonik is a silicone surfactant by Evonik. It has non hydrolysable structure for excellent premix stability and good compatibility with rigid foam polyol pre-blends. Exhibits low... view more
Applications
Dabco® SI3203
Evonik
Dabco® SI3203 by Evonik is a silicone surfactant by Evonik. Provides very efficient emulsification, nucleation and stabilization, resulting in fine as well as uniform foams with excellent insulation... view more
Applications
Dabco® SI3501
Evonik
Dabco® SI3501 by Evonik acts as a silicone surfactant. It produces fine, uniform cells resulting in excellent ?-values. It has non hydrolysable structure for excellent premix stability and good... view more
Applications
Dabco® SI3503
Evonik
Dabco® SI3503 by Evonik acts as a silicone surfactant. It is also acts as a stabilizer for most conventional polyurethane systems. It has non hydrolysable structure for improved premix stability and... view more
Applications
Dabco® SI3504
Evonik
Dabco® SI3504 by Evonik is a silicone surfactant. In OCF applications, it will stabilize the foam structure and assist greatly in prepolymer compatibility. In rigid lamination systems, it has shown... view more
Applications
Dabco® SI4202
Evonik
Dabco® SI4202 by Evonik acts as a high performance surfactant. Provides excellent flame retardant properties in rigid foam applications and facilitates excellent cell structure in shoe sole... view more
Applications
Dabco® T
Evonik
Dabco® T by Evonik is a non-emissive amine catalyst. It provides smooth reaction profile. It possesses low PVC staining property and low fogging. Due to its reactive hydroxyl group, it readily... view more
Applications
Dabco® T-12
Evonik
Dabco® T-12 by Evonik acts as a catalyst based on dibutyltindilaurate. Used in the manufacture of rigid polyurethane foams. Promotes rapid gelation and tack-free times. Dabco® T-12 improves... view more
Applications
Dabco® T-120
Evonik
Dabco® T-120 by Evonik is an organotin gel catalyst. It provides high catalytic activity. It offers improved atmospheric stability. It is used in shoe sole polyurethane formulations and rigid... view more
Applications
Dabco® T-125
Evonik
Dabco® T-125 by Evonik acts as a lead-free metal catalyst. Compatible with amine co-catalysts. Offers high catalytic activity, selectivity to the urethane (polyol-isocyanate) reaction and improved... view more
Applications
Dabco® T-131
Evonik
Dabco® T-131 by Evonik is a high-activity organotin gelation catalyst used in a broad range of polyurethane foam and elastomer formulations. It was specially developed to provide delayed-action... view more
Applications
Dabco® T-9
Evonik
Dabco® T-9 by Evonik is stannous octoate- based catalyst. It offers uniform activity and very good stability. It is used in flexible slab stock polyether foams... view more
Applications
Dabco® T900
Evonik
Dabco® T900 by Evonik is a stannous octoate replacement metal catalyst. Offers uniform activity and similar usage levels as well as material handling to stannous octoate. It can be used with... view more
Applications
Dabco® TL
Evonik
Dabco® TL by Evonik acts as a sole amine catalyst. It has fine and uniform cell structure. Offers reduced amine emissions and wide processing latitude. It eliminates foam buildup at trough lip... view more
Applications
Dabco® TMR
Evonik
Dabco® TMR by Evonik is a tertiary amine catalyst. It provides a uniform and controlled rise profile compared to potassium-based catalysts. It promotes the polyisocyanurate reaction... view more
Applications
Dabco® TMR 30
Evonik
Dabco® TMR 30 by Evonik is an amine-based, delayed action urethane reaction catalyst. It is a weak trimerization catalyst. It is used for rigid polyisocyanurate foams... view more
Applications
Dabco® TMR-12
Evonik
Dabco® TMR-12 by Evonik is a trimerization catalyst. Provides formulators with the necessary tools for tailoring isocyanurate foam reactivity to meet processing needs. Possesses easy processing and... view more
Applications
Dabco® TMR-2
Evonik
Dabco® TMR-2 by Evonik is a tertiary amine catalyst. It provides a uniform and controlled rise profile compared to potassium-based catalysts. It promotes the polyisocyanurate trimerization... view more
Applications
Dabco® TMR-25
Evonik
Dabco® TMR-25 by Evonik is a trimerization catalyst. Possesses a smooth rise profile. Suitable for formic acid blown systems. Dabco® TMR-25 catalyst is used to produce polyisocyanurate foam in the... view more
Applications
Dabco® TMR-3
Evonik
Dabco® TMR-3 by Evonik is an amine-based, delayedaction trimerization catalyst. Recommended for the production of polyisocyanurate foam... view more
Applications
Dabco® TMR-4
Evonik
Dabco® TMR-4 is a trimerization catalyst by Evonik. Used for rigid polyisocyanurate foams including pour-in-place systems, including entry doors, building panels and walk-in cooler panels. Dabco®... view more
Applications
Dabco® TMR-7
Evonik
Dabco® TMR-7 by Evonik acts as an amine-based trimerization catalyst. It is odorless and permits higher indexes. Offers improved edge cure and reduced density. Dabco® TMR-7 is recommended for the... view more
Applications
Dabco® XD-102
Evonik
Dabco® XD-102 is an amine catalyst by Evonik. It is diluted in mono-ethylene glycol. Used in low density microcellular polyurethane foams to significantly improve the foam flowability. Dabco® XD-102... view more
Applications
Dabco® XD-103
Evonik
Dabco® XD-103 by Evonik is a tertiary amine catalyst. It enables the production of high-quality, low-density shoe soles that can be used in both polyester and polyether microcellular systems... view more
Applications
Dabco® XD-104
Evonik
Dabco® XD-104 by Evonik is a high efficiency tertiary amine catalyst. Offers improved flowability and surface structure. Provides faster demold time. It is used in shoe sole foam system... view more
Applications
Dabco® XDM
Evonik
Dabco® XDM by Evonik acts as a catalyst. Used primarily in flexible polyester foam... view more
Applications
Dabco® 125
Evonik
Dabco® 125 by Evonik is organotin gelation. It is used in HR foams. It offers improved foam breathability and provides increased load-bearing properties... view more
Dabco® 33-S
Evonik
Dabco® 33-S by Evonik is used as a polyurethane catalyst. It is a mixture of 33% triethylenediamine and 67% 1,4 butanediol... view more
Dabco® 8420
Evonik
Dabco® 8420 by Evonik can improve overall curing performance. It is recommended for thermoplastic polyurethane resin and lamination... view more
Applications
Dabco® BL-16
Evonik
Dabco® BL-16 by Evonik is an n-cetyl-n,n-dimethylamine-based curing agent. Used in polyester die cuttable flexible slabstock foams, integral skin and microcellular systems. Dabco® BL-16 provides... view more
Dabco® BL-22
Evonik
Dabco® BL-22 by Evonik is amine-based catalyst. Dabco® BL-22 is used in semi-flexible molded foam, integral skin, microcellular systems and a wide variety of rigid foams. Dabco® BL-22 is designed... view more
Applications
Dabco® BL-53
Evonik
Dabco® BL-53 by Evonik is tertiary amine-based catalyst. Dabco® BL-53 is recommended for thermoplastic polyurethane... view more
Applications
Dabco® DC197
Evonik
Dabco® DC197 by Evonik is a silicone glycol copolymer-based emulsifier. Used in high-density rigid molded foam applications. Offers very good flowability and adhesion. Dabco® DC197 possesses low... view more
Dabco® DC2517
Evonik
Dabco® DC2517 by Evonik is silicone surfactant. It provides lower fogging performance. It exhibits improved cell opening. It is designed for use in blow molding... view more
Applications
Dabco® DC3041
Evonik
Dabco® DC3041 by Evonik is non-hydrolyzable silicone glycol copolymer-based foaming agent. Dabco® DC3041 is used in shoe sole applications... view more
Applications
Dabco® DC4000
Evonik
Dabco® DC4000 by Evonik is silicone surfactant. Used in flexible polyester slabstock foams. It offers low fogging characteristics... view more
Applications
Dabco® DC4020
Evonik
Dabco® DC4020 by Evonik is a silicone stabilizer used for various polyester flexible slabstock foam and thermoplastic polyurethane. Dabco® DC4020 provides very good foam stability and very open foam... view more
Applications
Dabco® DC5169
Evonik
Dabco® DC5169 by Evonik is silicone-based emulsifier. Used in TDI, MDI/TDI and MDIbased cold cure flexible molded polyurethane foam systems. Offers foam stabilization. Possesses very fine foam cell... view more
Applications
Dabco® DC5384
Evonik
Dabco® DC5384 by Evonik is silicone-based emulsifier. It is used in molded rigid foams. Offers improved flow by reducing friction at the mold/polymer interface. Dabco® DC5384 enhances cell opening... view more
Applications
Dabco® DC5557
Evonik
Dabco® DC5557 by Evonik is a surfactant. It is developed specifically for use in pentane blown rigid foam... view more
Applications
Dabco® DC5580
Evonik
Dabco® DC5580 by Evonik is a nonhydrolyzable silicone glycol copolymer-based foaming agent. Dabco® DC5580 is recommended for thermoplastic polyurethane... view more
Applications
Dabco® DC5588
Evonik
Dabco® DC5588 by Evonik is a foaming agent. Dabco® DC5588 is silicone glycol copolymer and suitable for thermoplastic polyurethane... view more
Applications
Dabco® DC5885
Evonik
Dabco® DC5885 by Evonik is a medium-efficient silicone surfactant. It provides reduced force-to-crush in molded systems... view more
Applications
Dabco® DMEA
Evonik
Dabco® DMEA by Evonik is dimethylethanolamine. Used in polyether flexible slabstock foams, MDI high resiliency flexible molded foams, rigid bunstock and energy absorbing non-recoverable rigid... view more
Applications
Dabco® H-1010
Evonik
Dabco® H-1010 by Evonik is a low-corrosivity, controlled-activity (delayed) catalyst. Dabco® H-1010 is used in flexible molded polyurethane foams. It is recommended for blow molding... view more
Applications
Dabco® Kitane 20 AS
Evonik
Dabco® Kitane 20 AS by Evonik is a compatibilizer. It is used in hydrocarbon blown rigid foam applications and laminating... view more
Applications
Dabco® LK665
Evonik
Dabco® LK665 by Air Products is a non-silicone surfactant. Possesses excellent emulsification capability. Produces symmetrical and round foam cell structure. Provides excellent dimensional stability... view more
Applications
Dabco® MC
Evonik
Dabco® MC by Evonik is a delayed-action amine blowing catalyst. It is used in slab stock foams... view more
Dabco® MD02
Evonik
Dabco® MD02 by Evonik is a balanced, delayed-action catalyst. Dabco® MD02 is recommended for flexible blow molded foam applications... view more
Applications
Dabco® MD18
Evonik
Dabco® MD18 by Evonik is a balanced, delayed-action catalyst. It is recommended for flexible blow molded foam application... view more
Applications
Dabco® MD45
Evonik
Dabco® MD45 by Evonik is a gelation catalyst. Dabco® MD45 is used in the production of flexible and semi-flexible molded and rigid PIR foams... view more
Applications
Dabco® NE 200
Evonik
Dabco® NE 200 by Evonik is a novel non-emission(NE) gelling catalyst. Used in the production of all types of flexible molded polyurethane foam. Dabco® NE 200 offers very good foam flow properties... view more
Applications
Dabco® NE1060
Evonik
Dabco® NE1060 by Evonik is a novel non-emission (NE) gelling catalyst. Used in the production of all types of flexible molded polyurethane foam. Dabco® NE1060 offers very good foam flow properties... view more
Applications
Dabco® R-8020
Evonik
Dabco® R-8020 by Evonik is a low-viscosity liquid amine catalyst. It is used in semi-flexible and rigid polyurethane foam... view more
Dabco® T-10
Evonik
Dabco® T-10 by Evonik is a stannous-type catalyst. Dabco® T-10 is used for flexible slabstock applications. It is recommended for thermoplastic polyurethane... view more
Applications
Dabco® T-16
Evonik
Dabco® T-16 by Evonik is a stannous-type catalyst. It is used for slabstock foam. It is recommended for thermoplastic polyurethane and blow molding... view more
Applications
Dabco® T-26
Evonik
Dabco® T-26 by Evonik is a stannous-type catalyst. It is used for flexible slabstock foams... view more
Dabco® T-95
Evonik
Dabco® T-95 by Evonik is stannous-type catalyst. It is used for flexible slabstock polyethylene foams and sealants. It is recommended for thermoplastic polyurethane... view more
Applications
Dabco® T-96
Evonik
Dabco® T-96 by Evonik is stannous-type catalyst. It is used in polyether flexible slabstock foam... view more
Dabco® TMR-5
Evonik
Dabco® TMR-5 by Evonik is isocyanurate catalyst. It is designed for all types of polyisocyanurate (PIR) foam systems, including rigid boardstock and pour-in-place systems. Dabco® TMR-5 also used in... view more
Applications
Dabco® WT
Evonik
Dabco® WT by Evonik is a delayed-action amine catalyst. It is recommended for extrusion blow molding. It is recommended for use in all types of polyurethane foam... view more
Applications
Spotlight
Quick Navigation
Stay connected
Subscribe to our Newsletters
Industries Served
PlasticsElastomers
Plastics
Elastomers
Coatings Ingredients
Coatings
Ingredients
Adhesives Ingredients
Adhesives
Ingredients
Cosmetics Ingredients
Cosmetics
Ingredients
Polymer Additives
Polymer
Additives
Copyright © SpecialChem 2024
Terms and Conditions Privacy Policy Cookie Policy
Back to Top