Niax™

Niax Additive AP-01 by Momentive Performance Materials acts as an adhesion promoter. Helps reduce the friability often found in high-index and/or high-water content formulations. Enables adequate... view more

Niax™ Additive RA-1 by Momentive Performance Materials is a processing additive that improves green strength, dimension stability and facing adhesion. It is excellent for construction applications. Niax™ Additive RA-1 is used for rigid... view more

Niax™ Catalyst EF-100 by Momentive Performance Materials is a reactive strong blowing tertiary amine catalyst for polyurethane foams. It can be used in flexible slab-stock foams, high resilience molded foams, viscoelastic foams and... view more

Niax™ Catalyst EF-150 by Momentive Performance Materials is a reactive, blowing tertiary amine catalyst with low emission properties. It is compatible with toluene diisocyanate (TDI), methylene diphenyl diisocyanate (MDI) and... view more

Niax™ catalyst stannous octoate by Momentive is used in the production of polyurethane flexible slabstock foam. It can also be used in conjunction with a tertiary amine catalyst to achieve an... view more

Niax™ flame lamination ether FLE-200 by Momentive is a low viscosity additive designed to improve adhesion properties of polyether flame bonding foams. Its rapid buildup of tack time adhesion allows... view more

Niax™ Processing Additive DP-1022 by Momentive Performance Materials is a reactive polyfunctional additive. It is designed to create polyurethane (PU) foams with significantly better tensile... view more

Niax™ silicone L-1500 by Momentive is a non-hydrolyzable silicone surfactant. It is excellent for polyester-based microcellular integral-skin formulations. Helps provide cell stabilization that can... view more

Niax™ silicone L-1507 is a non-hydrolyzable silicone surfactant developed for use in polyester-based microcellular integral-skin formulations. It is a cell-regulating surfactant that provides fine... view more

Niax™ silicone L-3620 by Momentive is a silicone surfactant. It can help provide wide processing latitude through excellent foam openness, while maintaining good cell-regulating characteristics. It... view more

Niax™ Silicone L-3639 by Momentive is a surfactant with extremely low emissions of siloxanes as measured by the VDA278 method that can be considered for use in high resilience (HR) flexible MDI... view more

Niax™ Silicone L-5111 by Momentive Performance Materials is a silicone copolymer. It can be considered for use in the manufacture of rigid polyurethane foam, especially for pentane-blown PIR foam obtained by a continuous lamination... view more

Niax™ Silicone L-5309 by Momentive Performance Materials is a silicone surfactant. It is used as a stabilizer in the production of molded polyurethane foam. Its most common usage is in the automotive industry, where Niax™ Silicone L-5309... view more

Niax™ Silicone L-5345 by Momentive Performance Materials is an organo-silicone surfactant which is an excellent candidate to consider for use in the manufacture or rigid and semi-rigid polyurethane... view more

Niax™ silicone L-5420 by Momentive Performance Materials acts as a surfactant. Provides excellent cell control and to effectively compatibilize rigid foaming ingredients. It is soluble in most rigid... view more

Niax™ silicone L-5440 by Momentive Performance Materials is a non-hydrolyzable silicone surfactant which may be an excellent candidate for use in difficult-to stabilize rigid foam formulations, such... view more

Niax™ Silicone L-5614 by Momentive Performance Materials acts as a surfactant. Frothed foam technology utilizes high-shear mechanical mixers to incorporate dispersed air into a urethane system prior... view more

Niax™ Silicone L-5617 by Momentive Performance Materials is a lower VOC version of Niax Silicone L-5614. This hydrolyzable surfactant can provide cell opening while reducing both froth density and shear-induced cell... view more

Niax™ Silicone L-5690 by Momentive Performance Materials is a silicone/polyether copolymer. Acts as a co-surfactant that stabilizes froth in the mechanically frothed foam process. Possesses increased stabilization of mechanically... view more

Niax™ Silicone L-580 by Momentive Performance Materials is a non-hydrolyzable silicone based foaming agent. It provides excellent foam stability and fine regular cell structure in extremely low... view more

Niax™ Silicone L-590 by Momentive Performance Materials is a foaming agent. It can be an excellent material of choice for use in a variety of high-density formulations. Provides wide processing latitude in most conventional foam... view more

Niax™ Silicone L-603 by Momentive Performance Materials is an alkyl-pendant, organosilicone. It provides improved foam processability and improved foam stabilization, indicated by low foam densities and minimal density gradients... view more

Niax™ Silicone L-618 by Momentive Performance Materials is a surfactant. Provides broad process latitude in all grades of conventional flexible foams, including those of very low density where high... view more

Niax™ Silicone L-620 by Momentive Performance Materials is a high-performance alkyl-pendant type organosilicone surfactant. It offers superior performance in low-combustibility, all-water or... view more

Alkyl-pendant organosilicone. Used with CO2 as an auxiliary blowing agent and a flame retardant. Possesses wide foam processing latitude and very broad grade range latitude. Provides finest cell... view more

Niax™ silicone L-650 by momentive is a medium potency, alkyl-pendant, organosilicone surfactant for use in flexible slabstock foam applications that require the use of flame retardants. Use of this... view more

Medium potency, organosilicone. Used as surfactant in flexible slabstock foam operations. Offers very good froth stability. Provides wide foam processing latitude. Imparts very good processing on... view more

Niax™ antistat AT-30 is a unique fluorine-free anti-static additive. In comparison to common available anti-static additives Niax antistat AT-30 provides foam with no discoloration and good... view more

Niax™ catalyst A-1 by Momentive Performance Materials is 70 percent bis(2-dimethylaminoethyl) ether. Acts as an active urethane foam amine catalyst. As a matter of convenience, the pure amine ether... view more

Niax™ catalyst A-107 by Momentive Performance Materials is an amine catalyst for the water/isocyanate (blow) reaction. It delays the onset of the reaction, allowing higher concentrations to be used with a corresponding decrease in... view more

Niax™ catalyst A-230 by Momentive Performance Materials is a balanced gel-blow catalyst for use with methylenechloride or other auxiliary blowing agents that tend to destabilize foam formulations. It can be used to produce both... view more

Niax™ catalyst A-300 by Momentive is a liquid, water-soluble tertiary amine. Promotes the gelation reaction during the production process. It is less corrosive than mild steel. Niax™ catalyst A-300... view more

Niax™ catalyst A-31 by Momentive is a liquid, low-odor, water-soluble, tertiary amine composition for the production of flexible polyester polyurethane foam. Foams made with Niax™ catalyst A-31... view more

Niax™ catalyst A-33 by Momentive imparts a high level of activity and good physical properties to flexible foam systems. The optimum performance of Niax™ catalyst A-33 can be achieved when it is... view more

Niax™ catalyst A-337 by Momentive is a liquid, water-soluble tertiary amine to consider for use in the production of molded polyurethane foams. can help improve the foam skin cure at low mold... view more

Niax™ catalyst A-400 by Momentive is a liquid, water-soluble tertiary amine composition. It provides the benefits of extended pour times and increased open foam. Promotes the blowing reaction in the... view more

Niax™ catalyst A-440 is improved load building and flowability (which can be utilized in MDI molded foam applications). Niax™ catalyst A-440 generally offers a lower viscosity and can create harder... view more

Niax™ catalyst A-501 is a liquid tertiary amine catalyst that is highly selective to the water-blowing reaction. Possesses good internal cell-opening for better dimensional stability control and... view more

Niax™ catalyst A-533 is a powerful, tertiary amine catalyst more selective to the gelling (to the urethane forming) than the blowing reaction (with water to form carbon dioxide). It is a standard... view more

Niax™ catalyst A-537 is a liquid, delayed action, tertiary amine catalyst selective to the gelling (urethane forming) reaction. Delayed-action extends pour time needed for pouring complex parts... view more

Niax™ catalyst A-577 is a very powerful liquid, delayed-action, tertiary amine catalyst that is very selective to the gelling (urethane forming) reaction. Provides the benefit of allowing good foam... view more

Niax™ catalyst BDMA by Momentive is a liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reactions in rigid... view more

Niax™ catalyst C-131NPF by Momentive is a medium viscosity, low-odor, water-soluble, tertiary amine. Foams made with Niax catalyst C-131 exhibit significantly lower odor levels than those made with... view more

Niax™ catalyst C-41 by Momentive is a tertiary amine catalyst and an excellent candidate to consider for use in the manufacture of rigid polyurethane, isocyanurate-modified polyurethane and... view more

Niax™ catalyst C-5 by Momentive is a tertiary amine. It is characterized as a strong blowing catalyst while maintaining a good gel profile. Provides balanced catalysis of the water/ isocyanate... view more

Niax™ catalyst C-8 by Momentive is a tertiary amine catalyst. It is a strong base and is soluble in water and most organic solvents. Can be useful in a wide variety of foam applications, due to its... view more

Niax™ catalyst DMEE by Momentive is a liquid, low odor, tertiary amine catalyst. It can help promote foam rise and gel strength. It may be used as the sole amine catalyst. It typically shows rates... view more

Niax™ catalyst EF-600 by Momentive is a liquid, low odor, tertiary gel amine. The non-volatility of this amine catalyst is the result of molecular design and high molecular weight. This give... view more

Niax™ catalyst EF-600 by Momentive is a low odor, tertiary gel amine, designed to minimize or eliminate amine emissions in automotive interiors. The non-volatility of this amine catalyst is the... view more

Niax™ catalyst EF-700 by Momentive is a low odor tertiary amine. The non-volatile nature of this amine is the result of molecular design and high molecular weight. As such this amine is not expected... view more

Niax™ EF-708 by Momentive is a liquid, low odor, tertiary blow amine. The non-volatility of this amine catalyst is the result of molecular design and high molecular weight. This gives affinity... view more

Niax™ catalyst K-ZERO G by Momentive is a new, potassium catalyst that may be considered for ues in the manufacture of polyisocyanurate rigid foam. In catalyst K-ZERO G the typical glycol solvent... view more

Niax™ catalyst KST-100NPF by Momentive is a liquid, low odor, water soluble tertiary amine composition specifically designed for the production of flexible polyester polyurethane foams. It does not... view more

Niax™ Catalyst LC-5635 by Momentive is a latent heat activated catalyst. Has slightly slower cure rate than LC-5615/LC-5630. Provides similar physical properties to LC-5615 and LC-5630. Possesses... view more

Niax™ color stabilizer CS-22LF by Momentive is an additive specially developed for flame and heat lamination of polyether and polyester foams. It fulfils the most severe automotive specifications... view more

Niax™ silicone L-3415 by Momentive is a low emission silicone that may be considered for use in MDI molded foam. Can help provide wide processing latitude through excellent foam openness, while... view more

Silicone copolymer. Acts as a surfactant. It reduces cell coalescence during foaming and under high shear stress conditions thus minimizing the formation of voids migrating to the foam-substrate... view more

Medium potency, organosilicone. Acts as a flame retardant surfactant. It improves the processing and physical properties of foam containing natural oil polyol. It minimizes the amount of FR additive... view more

Organosilicone copolymer. Acts as a surfactant. It enables the production of very fine cells in HFC-245fa blown foams. It improves the blowing efficiency & flow properties and improves adhesion to... view more