Polycat®

Polycat® 12 by Evonik acts as a co-catalyst to improve cure. It is n-methyldicyclohexylamine suitable for rigid foam applications... view more

Polycat® 15 by Evonik is a non-emissive balanced amine catalyst. Due to its reactive hydrogen, it readily reacts into the polymer matrix. It has a slight selectivity towards the urea... view more

Polycat® 17 is a tertiary amine catalyst by Evonik. Used in low-density semi-flexible polyurethane foams and rigid polyurethane packaging foams... view more

Polycat® 30 is a low odor, balanced amine catalyst by Evonik. It increases system shelf life compared to systems containing other amine catalysts like Dabco® DMEA (dimethylethanolamine). Possesses... view more

Polycat® 31 by Evonik is a non-emissive amine catalyst. Promotes urea or blowing reaction. Offers reduced amine emissions during spraying and potential for glaucopsia or "blue haze". Polycat® 31 is... view more

Low odor tertiary amine. Acts as a catalyst. Promotes the urethane reaction (polyol-isocyanate) in rigid foam formulations. It can replace Polycat 8 catalyst when low odor is needed. Possesses... view more

Highly active tertiary amine. Acts as a catalyst. Promotes a balanced urethane/urea reaction in low water hydrocarbon blown rigid polyisocyanurate foams. Can be used in a variety of rigid... view more

Dimethylaminoethoxyethanol. Acts as a low-emissive amine catalyst. It is a reactive catalyst and is more selective towards the water-isocyanate blowing reaction. Due to its chemical structure, it... view more

It acts as a glycol diluted tertiary amine catalyst. Exhibits medium viscosity and low activity for easy on line dosing. Offers improved curing of rigid PUR systems and excellent performance in... view more

Polycat® 41 by Evonik is a moderately active trimerization catalyst. Offers very good blowing capability. Possesses very good performance in water co-blown rigid systems. Polycat® 41 is used in a... view more

Polycat® 46 by Evonik is potassium acetate in ethylene glycol. Acts as a trimerization catalyst. Used in semi-flexible molded instrument panel foams, rigid PIR boardstock foams, rigid pour-in-place... view more

Polycat® 5 by Evonik is tertiary amine. Acts as a blowing catalyst. Promotes the urea (water-isocyanate) reaction in a variety of rigid and flexible polyurethane foam applications. Used in MDI based... view more

Polycat® 58 by Evonik is tertiary catalyst. Used in cold cure and hot cure flexible molded polyurethane foam systems. Provides good surface cure... view more

Tertiary amine catalyst[Bis-(dimethylaminopropyl)methylamine]. Used in all-water-blown TDI or TDI/MDI high resilience (HR) foam; and in TDI/MDI- or MDI-based, cold-cure molded polyurethane... view more

Polycat® 8 by Evonik is tertiary amine. Used in insulation foams, including spray, slabstock, board laminate and refrigeration formulations, rigid foam furniture frame and decorative parts... view more

Polycat® 9 by Evonik is a tertiary amine. Acts as a catalyst. Provides a balanced promotion of the urethane and urea reactions in flexible as well as rigid foam applications. It can be used as a... view more

1,8 Diaza-bicyclo(5,4,0)undecene-7. Used in integral skin semi-flexible foams... view more

Delayed action tertiary amine based on DBU. Acts as a catalyst. Promotes the urethane (polyol-isocyanate) reaction in microcellular, rigid, integral skin and elastomer applications. Is... view more

Polycat® SA-2LE by Evonik is low emissive, delayed action tertiary amine based on DBU. Acts as a catalyst. It strongly promotes the urethane reaction under heat activation in microcellular, integral... view more

Tertiary amine. Used in the manufacture of polyurethane foams, insulation foams, including board laminate, and refrigeration spray formulations. Offers very good stability... view more

Polycat® 140 by Air Products is a low-emissive amine catalyst for low density, water blown, open cell spray polyurethane foam (SPF). This is a reactive catalyst and more selective for the... view more

Polycat® 141 by Air Products is a low-emissive amine catalyst for low density, water blown, open cell spray polyurethane foam (SPF). When used in combination with a catalyst such as Polycat 140 or... view more

Polycat® 142 by Air Products is a low-emissive amine catalyst for low density, water blown, open cell spray polyurethane foam (SPF). When used in combination with a catalyst such as Polycat 140 or... view more

Polycat® 201 by Evonik is an amine based catalyst for use with low GWP blowing agents. Being a reactive amine catalyst, compared to conventional catalysts it facilitates for reduced amine emissions... view more

Polycat® 203 by Evonik is a low water containing amine based catalyst with outstanding stability in formulations that contain low GWP blowing agents. In comparison to conventional catalysts, it is a... view more

Polycat® 210 by Air Products is a low odor gel catalyst, designed for use with next generation blowing agents such as HFO-1233zd. It facilitates good adhesion between foam and substrates, whilst... view more

Polycat® 215 by Air Products is a blow catalyst, designed for use with next generation blowing agents such as HFO-1233zd. It facilitates good flow-ability of the foaming system, whilst providing for... view more

Liquid tertiary amine. Used for insulation foams(spray, board laminate and refrigeration) and rigid formulations for furniture frame and decorative parts manufacture... view more

Trimerization catalyst. Used in polyisocyanurate and polyurethane modified polyisocyanurate foam. Provides processing efficiency and improved physical properties... view more

Proprietary trimerization catalyst. Used for rigid polyurethane foam. Provides high catalytic activity... view more

Low viscosity amine. Used in the manufacture of polyurethane foam. Provides good processing latitude... view more

Heat-activated, delayed-action polyurethane catalyst based on the strong cyclic amine 1,5-diaza-bicyclo (5.4.0) undec-5-ene. Used in water-blown and froth pour-in-place rigid systems. Provides... view more

Polycat® SA1-10 by Evonik is heat-activated, delayed-action polyurethane catalyst. Provides excellent back-end cure. It can provide an extended pot life. Polycat® SA1-10 stays liquid at low... view more