Calcium carbonate. Acts as an additive. It is a dry powder with high brightness and controlled top-cut. Has high purity, unique particle shape and narrow particle size distribution. Offers high... view more

CalciRC 100S by CalciTech Europe is calcium carbonate. Acts as an additive. It is a stearic acid coated version of CalciRC 100. Has high purity, unique particle shape and narrow particle size distribution... view more

300 Slack Wax by Calumet Specialty Products Partners is a slack paraffin wax. 300 Slack Wax is used in rubber and polyvinylchloride (PVC) processing... view more

300 Soft Wax by Calumet Specialty Products Partners is a soft paraffin wax. 300 Soft Wax is designed for use in rubber and polyvinylchloride (PVC) processing applications... view more

CG Micropet by Calumet Specialty Products Partners is a paraffin micro wax. It is compatible with polyvinylchloride (PVC). CG Micropet is suitable for rubber applications... view more

CW-155 Pet A by Calumet Specialty Products Partners is a paraffin micro wax. CW-155 Pet A is used in PVC processing and rubber applications... view more

CW-175 Micro A by Calumet Specialty Products Partners is a paraffin micro wax. Shows compatibility with polyvinylchloride (PVC). CW-175 Micro A is designed for rubber applications... view more

Atmer™ 1010 by Cargill is an anti-fogging additive in laminated PE food wrap films and for plastic cling. It migrates to the surface of the polymer where it helps to lower the surface tension of... view more

Atmer™ 112 by Cargill is a pigment dispersant. It is recommended for use in PE and PVC polymers, providing a better dispersion of pigments by acting at the pigment surface to improve compatibility... view more

Atmer™ 121 by Cargill is a non-vegetable-based, anti-fogging additive. This modified glycerol ester additive is recommended for use in LDPE and EVA based films. It can be dispersed evenly through... view more

Atmer™ 688 by Cargill is a vegetable-based anti-fogging agent. This liquid blend is recommended for use in food wrap film applications. It shows excellent performance in laminated PE films. This... view more

Priplast™ 1838 by Cargill is a versatile, amorphous, all-round polyester polyol building block. Designed for high-performance applications. It offers enhanced durability in polyurethane systems... view more

Sebacic acid. Acts as an intermediate. Used for producing polyamide resin such as nylon 1010, nylon 610, nylon 810, and nylon 9 as well as winter tolerant plasticizer DOS and DBS. Can also be used... view more

Sebacic acid. Acts as an intermediate. Used for producing polyamide resin such as nylon 1010, nylon 610, nylon 810, and nylon 9 as well as winter tolerant plasticizer DOS and DBS. Can also be used... view more

Sebacic acid. Acts as an intermediate. Used for producing polyamide resin such as nylon 1010, nylon 610, nylon 810, and nylon 9 as well as winter tolerant plasticizer DOS and DBS. Can also be used... view more

Sebacic acid. Acts as an intermediate. Used for producing polyamide resin such as nylon 1010, nylon 610, nylon 810, and nylon 9 as well as winter tolerant plasticizer DOS and DBS. Can also be used... view more

LYSI-302C distributed by DKSH is a silicone masterbatch. It is a pelletized formulation with 65% ultra-high molecular weight siloxane polymer dispersed in ethylene-vinyl acetate copolymer (EVA). It... view more

LYSI-401 distributed by DKSH is a siloxane polymer masterbatch. It is a pelletized formulation with 50% ultra-high molecular weight siloxane polymer dispersed in low density polyethylene (LDPE)... view more

LYSI-402 distributed by DKSH is a siloxane polymer masterbatch. It is a pelletized formulation with 50% ultra-high molecular weight siloxane polymer dispersed in ethylene-vinyl acetate copolymer... view more

LYSI-406 distributed by DKSH is siloxane polymer masterbatch. This is a pelletized formulation with 50% ultra-high molecular weight siloxane polymer dispersed in polypropylene (PP). It is widely... view more

Cirrasol™ G-265 by Croda is fatty amine quaternary ammonium salt. Acts as a dispersant, emulsifier, demulsifier, anti-static agent, cationic surfactant and wetting agent. Exhibits efficient... view more

Synperonic™ PE/L62 by Croda is an ethoxylated polypropylene oxide. Acts as a dispersant, non-ionic wetting agent and emulsifier. Possesses high difunctionality, low foaming and hydrolytic stability... view more

Synperonic™ PE/L64 by Croda is a non-ionic ethylene oxide/propylene oxide block copolymer. This water soluble surfactant is an effective defoamer, wetting agent and polymeric emulsion stabilizer. It... view more

CONPOL™ 10AF by Dow is a concentrated anti-fogging masterbatch made from an ethylene methacrylic acid copolymer. It contains 10% anti-fogging agent by weight. It is designed to modify the surface... view more

CONPOL™ 4R11S1 by Dow is amide-based concentrated slip and release agent masterbatch made from an ethylene-methacrylic acid carrier resin. It contains 4% release agent and 11% slip agent by weight... view more

DOWSIL™ 11-100 Additive distributed by DKSH is a low viscosity, siloxane process aid/FR synergist. It contains alkoxy and alkyl functional groups on siloxane to improve LOI value for low smoke... view more

DOWSIL™ 30-424 Additive distributed by DKSH is a light diffusion additive for polycarbonate and polystyrene resins. It is a cross-linked methacryloxy functional silicone elastomer powder... view more

DOWSIL™ 4-7081 Resin Modifier distributed by DKSH is a halogen-free, siloxane process aid/FR synergist. This powdered siloxane is recommended as processing aids in highly filled thermoplastic... view more

Conpol™ 20B by DuPont is concentrated anti-blocking masterbatch made from an ethylene methacrylic acid copolymer. It contains 20% anti-blocking agent by weight. Designed to modify the surface... view more

Concentrated anti-blocking masterbatch made from an ethylene methacrylic acid copolymer. Contains 12.5% anti-blocking agent by weight. Designed to modify the surface properties of films that are... view more

Amide-based concentrated slip masterbatch made from an ethylene-methacrylic acid carrier resin. Contains 20% slip agent by weight. Designed to modify the surface properties of films that are made... view more

Amide-based concentrated slip masterbatch made from an ethylene-methacrylic acid carrier resin. Contains 20% slip agent by weight. Designed to modify the surface properties of films that are made... view more

Inorganic-type anti-blocking and amide-based slip masterbatch made from an ethylene methacrylic acid copolymer. Contains 5% anti-blocking agent and 10% slip agent by weight. It is a concentrated... view more

Oxo-biodegradant additive. It is designed to biodegrade the plastic at a controlled rate when the plastic is exposed to photo (sunlight), thermal (heat) and mechanical stress. Plastic eventually... view more

AAEM is acetoacetoxyethyl methacrylate designed for acetoacetylated polymers. It is a reactive monomer for UV cure applications and self-crosslinkable acrylic emulsions. Suitable for automotive OEM... view more

Crystex™ 60 OT 10 by Eastman is a non-blooming vulcanizing agent. It provides non-staining and non-discoloring properties. It retards bin scorch, prevents migration of sulfur and preserves surface tack... view more

Crystex™ HD OT 20 by Eastman is a non-blooming vulcanizing agent for unsaturated elastomers. It retards bin scorch, prevents migration of sulfur and preserves surface tack. It offers improved... view more

Crystex™ HS OT 20 by Eastman is a non-blooming vulcanizing agent for unsaturated elastomers. It retards bin scorch, prevents migration of sulfur and preserves surface tack. It offers thermal... view more

Duralink™ HTS by Eastman is an adhesion promoter. It is used in sulfur-based vulcanization systems to generate hybrid cross-links. It further provides increased retention of physical and dynamic... view more

Bluesil™ ADD 714 by Elkem Silicones is an inhibitor. It provides no blooming and outstanding processing aptitude. It offers good vulcanization kinetic and no vulcanization by-product. It provides... view more

Methylalkylpolysiloxane. Acts as anti-adherent agent. Has outstanding lubricating properties, good compatibility with many products other than silicones. It appears from clear to slightly cloudy... view more

Bluesil™ GUM 753 by Elkem Silicones is dimethylsiloxane, methylvinyl gum-based processing aid. It is used to manufacture masterbatches of pigments, reinforcing & diluting fillers for silicone... view more

Bluesil™ GUM 795 by Elkem Silicones is dimethylsiloxane, methylvinyl gum-based processing aid. It shows high level of filler acceptance. It possesses high consistency, low volatile content and... view more

Bluesil™ GUM FB by Elkem Silicones is dimethylsiloxane gum-based processing aid. It possesses high consistency, low volatile content and excellent heat stability up to 200°C. It also shows high... view more

LOXIOL® A 4 SPEZIAL by Emery Oleochemicals is a 100% renewably-derived antifogging agent. It is an excellent alternative to NPEs (nonylphenol ethoxylate). By using LOXIOL® A 4 SPEZIAL in food wrap... view more

HyPrene P150BS by Ergon is a hydrotreated paraffinic process oil. It provides excellent color stability and low volatility. HyPrene P150BS passes the IP 346 labeling requirement... view more

AMICURE® UR2T by Evonik is a substituted urea-based accelerator (1,1’-(4 methy-m-phenylene)bis(3,3 dimethyl urea)]) for dicyandiamide-cured epoxy resins. Used in heat-cure composites and prepreg... view more

Amicure® UR7/10 by Evonik is 1-Phenyl 3,3 dimethyl urea-based accelerator. It combines excellent latency at ambient temperature in systems heated above its activation temperature. Possesses rapid... view more

CUREZOL® 1B2MZ by Evonik is imidazole curing agent for epoxy resins. It is a low viscosity accelerator. Designed for potting and encapsulation in electrical and electronic applications. CUREZOL®... view more

CUREZOL® 2E4MZ by Evonik is an accelerator in the reaction between epoxy resins and other curing agents. Offers single package latency from several hours to greater than six months. Possesses rapid... view more

CUREZOL® 2MA-OK by Evonik acts as an accelerator. Offers single package latency from several hours to greater than six months. It also functions as an accelerator in the reaction between epoxy... view more

Jayflex™ 210 plasticizer by ExxonMobil is a naphthenic hydrocarbon compatible with flexible PVC products. It improves low-temperature flexibility and processing of flexible PVC compounds. Its low... view more

Jayflex™ 220 plasticizer by ExxonMobil is an aliphatic hydrocarbon. It improves low-temperature flexibility and processing of flexible PVC compounds. Its low viscosity yields faster dry-blending... view more

Jayflex™ DIDP plasticizer by ExxonMobil is diisodecyl phthalate, a general-purpose high-molecular-weight plasticizer. It is designed for flexible PVC products that require resistance to degradation... view more

Jayflex™ DIDP-E plasticizer by ExxonMobil is diisodecyl phthalate, a general-purpose high-molecular-weight plasticizer. It is designed for flexible PVC products that require resistance to... view more

Jayflex™ DINA plasticizer by ExxonMobil is diisononyl adipate. It is a primary plasticizer but, more typically, are used in blends with general-purpose phthalates to improve low-temperature... view more

Escorez™ 1102 by ExxonMobil Chemical is a tackifier. It is an aliphatic hydrocarbon resin. It is used in a variety of adhesive polymers including amorphous polypropylene (APP), amorphous... view more

Escorez™ 1304 by ExxonMobil Chemical is a tackifier. It is a premium aliphatic hydrocarbon resin. It is used in a variety of adhesive polymers including EVA, metallocene polyolefins, amorphous polypropylene... view more

Escorez™ 1315 by ExxonMobil Chemical is a tackifier. It is a premium aliphatic resin with a high softening point. It provides high temperature performance and cohesive strength. It is used in a variety of... view more

Escorez™ 5320 by ExxonMobil Chemical is a tackifier. It is a water-white cycloaliphatic hydrocarbon resin. It is applicable in a variety of polymers including metallocene polyolefins, styrene... view more

Escorez™ 5380 by ExxonMobil Chemical is a tackifier. It is a water white cycloaliphatic hydrocarbon resin. This grade is applicable in a variety of adhesive polymers including metallocene... view more

Nofia® CO6010-EX by FRX polymers is environmentally-sustainable, polyphosphonate-based flame retardant. It is suitable for polycarbonate, acrylonitrile butadiene styrene and acrylonitrile styrene acrylate... view more

10408 by Ferro is a rutile structured standard chrome antimony titanium pigment with a reddish shade. It is opaque to visible light with high NIR reflectance ("cool pigment"). Exhibits excellent... view more

10550 by Ferro is a manganese antimony titanium buff rutile pigment. It is suitable for polyolefins, PS, ABS, engineering polymers, PVC, silicones and rubber applications. It is opaque to visible... view more

Cool Colors® 21-4030 by Ferro is spinel structured, cobalt titanate pigment with a bluish shade with high tinting strength. It is opaque to visible light with moderate NIR reflectance ("cool... view more

Cool Colors® 22-10336 by Ferro is a spinel structured cobalt aluminate pigment with a reddish shade. It offers high tinting strength. It is opaque to visible light with moderate NIR reflectance... view more

Cool Colors® V-9412 by Ferro is nickel antimony titanium yellow rutile pigment with a greenish shade and high tinting strength. It is opaque to visible light with high NIR reflectance ("cool... view more

Fine-Blend® EMI-100 is a general-purpose, low molecular weight, masterbatch carrier activator. It is styrene-acrylonitrile binary random copolymer, and it has colorless bead appearance. It can... view more

SynPrime™ 10AD by GEON Performance Solutions is an aliphatic adipate ester which is API category Group V fluid. It acts as a lubricant with relatively high viscosity index, excellent low temperature... view more

SynPrime™ 10SB by GEON Performance Solutions is an aliphatic sebacate ester which is API category Group V fluid. It acts as a lubricant offeriing improved biodegradability over mineral oils and other synthetic... view more

SynPrime™ 12AD by GEON Performance Solutions is an aliphatic adipate ester-based lubricant. It is an API category Group V fluid. It has relatively high viscosity index, excellent low temperature flow & good solvency. It... view more

SynPrime™ 15AD by GEON Performance Solutions is an aliphatic adipate ester which is API category Group V fluid. It acts as a lubricant. It has relatively high viscosity index, excellent low... view more

SynPrime™ 25AD by GEON Performance Solutions is an aliphatic adipate ester which is API category Group V fluid. It acts as a lubricant. It can lower operating costs by reducing energy consumption and equipment downtime... view more

Highly efficient and bio-based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance... view more

Highly efficient and bio-based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance... view more

Highly efficient and bio-based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance... view more

Highly efficient and bio-based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance... view more

Plasthall® 190 by Hallstar is a glycol ether ester. It is a non-phthalate plasticizer. It has higher efficiency at viscosity reduction and provides significant reduction in Tg. It reduces skin time... view more

TegMeR® 812 by Hallstar is a glycol ester. It is a non-phthalate plasticizer. It is designed for high polarity polymers used in high temperature applications. TegMeR® 812 has excellent compatibility... view more

Hallstar® Dioplex® 100 by Hallstar is a polyester sebacate. It is a high molecular weight polymeric plasticizer offering permanence at a very high level. Provides good heat resistance and 80%... view more

TP-759® by Hallstar is a mixed ether ester. It is a plasticizer that exhibits low volatility. Compounds made with TP-759® retain their properties after heat aging. It can be used to develop optimum... view more

TP-90B® by Hallstar is a mixture of hexaoxatricosane (95-99%) and diethylene glycol monobutyl ether (1-5%). It is a highly compatible plasticizer designed to provide maximum low temperature... view more