OK
The material selection platform
Polymer Additives
by SpecialChem
 
Save
Cette page a bien été ajoutée à vos favoris
168 products match your search
Product Name
Supplier
Description
Dabco® 1027 by Evonik acts as a catalyst. It is highly reactive and selective towards the urethane (polyol-isocyanate) reaction. Improves flowability while maintaining fast demolding. It can also be... view more
Dabco® 1028 by Evonik is an amine catalyst. It improves the cream time and provides improved flowability while maintaining fast demolding. It is highly reactive and selective towards the urethane... view more
Dabco® 1030 is a highly reactive amine catalyst by Evonik. It is selective towards the urethane reaction. It reduces demold time while having similar cream time to traditional amine catalysts. It... view more
Dabco® 2021 is polyurethane catalyst by Evonik. Offers very good processing latitude and increased hardness. Used specifically for low density conventional and HLB flexible slabstock foam... view more
Dabco® 2033 by Evonik is a catalyst based on optimized tertiary amine. Offers broad processing latitude in the production of flexible slabstock polyurethane foam. Increases bun height at critical... view more
Dabco® 2035 by Evonik is a hardener. Used in flexible polyether slabstock foams... view more
Dabco® 2039 by Evonik is amine catalyst. Used to promote the urethane (polyol isocyanate) reaction. It has low VOC/fogging values. It is a low odor alternative to morpholine based amines in flexible... view more
Dabco® 2040 by Evonik is a low odor amine catalyst. It enhances cure and adhesion to substrate in a variety of flexible as well as rigid polyurethane foams. Used in formulations with water as a... view more
Dabco® 25-S by Evonik acts as a catalyst. It is used in the synthesis of prepolymers and curing of polyurethanes... view more
Dabco® 3040 is a mild balanced amine catalyst by Evonik. It works well in different kind of iso system like TDI, T/M, M/T and MDI systems. Exhibits excellent surface curing at lower mold temperature... view more
Dabco® 33-LV is a catalyst designed by Evonik. Used in the synthesis of prepolymers and curing of polyurethanes... view more
Dabco® 33-LX by Evonik is a multi-purpose catalyst. It can be used as a one-to-one replacement for Dabco 33-LV® catalyst or as a three-to-one replacement for Dabco® crystalline catalyst in all foam... view more
Dabco® 8154 by Evonik is a blocked tertiary amine catalyst. Promotes the urethane (polyol-isocyanate) reaction while providing a delayed initiation in flexible and rigid polyurethane foams. Provides... view more
Dabco® B-16 by Evonik is amine catalyst. Used in polyester die cuttable flexible slabstock foams, integral skin and microcellular systems. Dabco® B-16 provides improved surface cure... view more
Dabco® BA150 by Evonik is a non-emissive, hydrolytically stable blocking agent. It is used to delay the catalyst reaction and to improve flow while maintaining back end cure. Its components are all... view more
Dabco® BA201 by Evonik acts as a processing aid. Provides front-end delay while increasing back-end cure. It improves surface cure and increase the stiffness of PIR boards. Used for all polyether... view more
Dabco® BA305 by Evonik acts as a catalyst. It is compatible with other commonly used polyurethane catalysts and additives. It can be used in combination with Dabco® NE1090 non emissive gel catalyst... view more
Dabco® BL-11 by Evonik is an active amine catalyst. Designed for all types of flexible foam and extrusion blow molding applications. Dabco® BL-11 is suitable for thermoplastic polyurethane... view more
Dabco® BL-13 by Evonik is a catalyst based on (2-dimethylamino ethyl) ether. Used in flexible foams. Dabco® BL-13 is designed for extrusion blow molding... view more
Dabco® BL-17 by Evonik is a delayed-action catalyst. Used in energy absorbing non-recoverable rigid foams. Dabco® BL-17 is suitable for thermoplastic polyurethane and extrusion blow molding... view more
Dabco® BL-19 by Evonik is a catalyst based on bis(2-dimethylamino ethyl) ether. It is a tertiary amine that primarily promotes the urea (water-isocyanate) reaction. Dabco® BL-19 is suitable for... view more
Evonik
Dabco® BLV by Evonik is a blend of blowing and gelling amine catalyst. Used in flexible slabstock foams and extrusion blow molding applications. Dabco® BLV offers superb catalytic activity... view more
Dabco® BP52 by Evonik is a flame lamination agent. It features low viscosity for easy handling and incorporation into the foam formulation. Offers excellent adhesion of the foam to the substrate. It... view more
Dabco® BX405 by Evonik is a high efficiency amine catalyst. Shows better post-curing performance than DMCHA and catalytic activity equivalent to DMCHA. It strongly catalyzes the reaction of polyol... view more
Dabco® CS90 is a tertiary amine catalyst by Evonik. Offers increased foam softening... view more
Dabco® Crystalline by Evonik is a high-purity crystalline catalyst. Used in all types of polyurethane foams including flexible slabstock, flexible molded, rigid, semi-flexible and elastomeric... view more
Dabco® DC 3043 is a blowing agent by Evonik. It is silicone glycol copolymer for use in shoe soles. Dabco® DC 3043 is suitable for TPU applications... view more
Evonik
Dabco® DC1 by Evonik is a catalyst that provides strong gelling and back end cure by promoting the urethane (polyol-isocyanate) reaction while delaying initiation as well as providing long pot life... view more
Dabco® DC193 by Evonik is a silicone surfactant with improved c har formation. Provides excellent flame retardant properties and excellent cell structure in shoe sole applications. Possesses good... view more
Dabco® DC198 by Evonik acts as an emulsifier. It is a high-potency silicone glycol copolymer with high efficiency. Provides good stability in both water and amine premixes. Dabco® DC198 is used in... view more
Evonik
Dabco® DC2 by Evinik is a catalyst that provides delayed reaction initiation while maintaining a strong back end cure. It promotes the urethane (polyol-isocyanate) reaction in flexible molded... view more
Dabco® DC2525 by Evonik acts as a silicone stabilizer and emulsifier. Used in cold cure flexible molded MDI and MDI/TDI polyurethane systems. Dabco® DC2525 is suitable for processing by extrusion... view more
Dabco® DC2584 by Evonik is a high efficiency surfactant and foaming agent. Designed for flexible molded foam applications, MDI and MDI/TDI cold cure systems. Dabco® DC2584 has a low fogging... view more
Dabco® DC2585 is a silicone surfactant and emulsifier by Evonik. Offers very good vent stability and has the ability to eliminate basal cell formation. Possesses low VOC and fogging values and... view more
Dabco® DC3042 by Evonik acts as a surfactant. It is a bulk stabilizing silicone glycol copolymer designed for use with all polyester and polyether microcellular applications. Possesses a fine... view more
Dabco® DC3043 by Evonik is a surface-stabilizing surfactant. It provides fine, uniform cell size distribution, good surface quality, and good dimensional stability in normal and lower-density shoe... view more
Dabco® DC5000 by Evonik acts as a foaming agent. It is a non-hydrolysable silicone glycol copolymer suitable for TPU applications... view more
Dabco® DC5043 by Evonik is a low viscosity emulsifier based on a silicone glycol copolymer. Used in high-resiliency flexible polyurethane foams. Provides non-hydrolyzable bonding and is suitable for... view more
Dabco® DC5098 is a non-hydrolyzable silicone emulsifier by Evonik. Used in rigid polyurethane and polyisocyanurate foam. Dabco® DC5098 offers very good dimensional stability... view more
Dabco® DC5103 by Evonik acts as a silicone surfactant. Offers very good emulsification properties. Dabco® DC5103 is suitable for thermoplastic polyurethane... view more
Dabco® DC5160 by Evonik acts as a foaming agent. It is based on silicone glycol. Provides medium to high efficiency. Dabco® DC5160 is suitable for thermoplastic polyurethane... view more
Dabco® DC5164 by Evonik is a high-efficiency silicone surfactant. Used for cold cure flexible molded polyurethane foam systems. Suitable for extrusion blow molding applications. Offers very good... view more
Dabco® DC5179 by Evonik is a surfactant based on a non-hydrolysable silicone. Provides very good vent stability. Dabco® DC5179 is suitable for thermoplastic polyurethane... view more
Dabco® DC5188 is a high efficiency silicone stabilizer by Evonik. Acts as a foaming agen for polyether flexible slabstock formulations. Dabco® DC5188 is suitable for TPU resin... view more
Dabco® DC5258 by Evonik acts as an emulsifier based on silicone glycol. Used in a variety of cold cure flexible molded and semi-flexible polyurethane foam systems. Suitable for thermoplastic... view more
Dabco® DC5350 by Evonik acts as a silicone surfactant. Provides a good balance of stabilization and open cells. Imparts improved performance in flammability testing. Dabco® DC5350 offers good foam... view more
Applications
Dabco® DC5357 by Evonik is non-hydrolyzable silicone emulsifier. Used for water co-blown rigid polyurethane foams and extrusion blow molding applications. Offers very good foam flowability and... view more
Dabco® DC5526 is a foaming agent and silicone stabilizer by Evonik. Used in polyester flexible slabstock foam and thermoplastic polyurethane... view more
Dabco® DC5585 by Evonik acts as a silicone surfactant. Offers superior thermal properties, excellent foam flow, competitive cost in use and fine as well as closed cell structure. Dabco® DC5585 is... view more
Dabco® DC5598 by Evonik is a non-hydrolyzable emulsifier. Used in rigid polyurethane & polyisocyanurate foam and extrusion blow molding applications. Offers good compatibility with common rigid foam... view more
Dabco® DC5604 by Evonik is a non-hydrolyzable emulsifier based on silicone glycol copolymer. Used in producing rigid PUR and PIR foams. Offers an ideal balance of processing and performance... view more
Dabco® DC5810 by Evonik is a high-efficiency surfactant. Provides good nucleation, a high degree of emulsification and good bulk stability. It produces foams with fine as well as uniform cell... view more
Dabco® DC5900 by Evonik acts as a foaming agent. Offers improved emulsification within the foam system... view more
Applications
Dabco® DC5901 by Evonik is a foaming agent. Exhibits a high degree of emulsification. Dabco® DC5901 provides very good froth stability and good bulk stability... view more
Applications
Dabco® DC5906 by Evonik acts as a foaming agent. Used as a foam stabilizer in flexible polyether slabstock foam... view more
Applications
Dabco® DC5933 by Evonik acts as a surfactant. Provides good nucleation, a high degree of emulsification and good bulk stability to produce foams with fine as well as uniform cell structure. Offers... view more
Dabco® DC5950 by Evonik acts as an emulsifier. Offers improved performance through its ability to emulsify incompatible components. Dabco® DC5950 is suitable for thermoplastic polyurethane... view more
Dabco® DC5986 by Evonik acts as a surfactant. Provides good nucleation, high degree of emulsification, excellent froth stability and good bulk stability to produce foams with uniform cell structure... view more
Dabco® DC5987 is a high-efficiency surfactant by Evonik. Provides good nucleation, high degree of emulsification, excellent froth stability and good bulk stability to produce foams with uniform cell... view more
Dabco® DC5990 is a high efficiency, non-hydrolyzable surfactant by Evonik. It can provide good nucleation, a high degree of emulsification, excellent froth stability and good bulk stability to... view more
Dabco® DC5LE by Evonik acts as an accelerator. It is a low emission delayed action co-catalyst that strongly promotes the urethane (polyol-isocyanate) reaction while maintaining cream time and... view more
Dabco® DC6070 by Evonik acts as an emulsifier. Possesses ability to eliminate basal cell formation in difficult-to-mold tooling. Offers excellent foam surface appearance and vent stability as well... view more
Dabco® DMDEE by Evonik is an amine blowing catalyst. Used in rigid foam sealant systems as well as for flexible slabstock foams. Dabco® DMDEE is suitable for processing by extrusion blow molding... view more
Evonik
Dabco® EG by Evonik acts as a catalyst. Used in polyurethane formulations. Dabco® EG possesses strong gelation catalysis... view more
Dabco® JXP508 by Evonik is a highly efficient amine catalyst. Based on its trimerization capability, it could provide very good post-curing to foam. Improves adhesion strength of foam to substrate... view more
Dabco® K-15 by Evonik acts as a cost-effective isocyanurate catalyst. Used in the production of rigid isocyanurate foams. Dabco® K-15 provides cost-effective and high conversion rate... view more
Dabco® K-15LV by Evonik acts as a catalyst. Its low viscosity facilitates ease of pumping at low temperatures. It is cost-effective and offers high conversion rate. Dabco® K-15LV promotes the... view more
Dabco® K2097 by Evonik is a standard trimerization catalyst. Used for rigid foam applications. Dabco® K2097 is suitable for thermoset PU resin... view more
Dabco® LK-221 by Evonik is a unique organic surfactant for microcellular and rigid foam formulations. Provides a smooth surface and excellent adhesion. Can be used as a replacement or co-surfactant... view more
Dabco® LK-443 by Evonik is a unique organic surfactant for use in rigid polyurethane applications to provide a smooth surface. It can be used as a replacement or co-surfactant for silicone-based... view more
Dabco® MB20 by Evonik acts as a co-catalyst with a tertiary amine to accelerate the urethane reaction and cure. Exhibits delayed viscosity build on front-end at low usage level while promoting... view more
Applications
Dabco® MP601 by Evonik is a delayed action, balanced tertiary amine catalyst. It is developed for fast demold high resiliency (HR) molded foam systems. Provides effective balanced reactions with... view more
Applications
Dabco® MP602 by Evonik is a delayed non-emissive amine catalyst. It promotes the urethane (polyol-isocyanate) reaction. It was developed for use in cold cure and hot cure flexible molded... view more
Applications
Dabco® MP608 by Evonik acts as a delay balance amine catalyst. It works well in TDI, T/M, M/T and MDI systems. It delays cream time with fast post curing and effectively balances reactions with... view more
Evonik
Dabco® NCM is n-cocomorpholine- based catalyst by Evonik. Used for polyester slabstock foams... view more
Applications
Dabco® NE 400 is a novel non-emission (NE) catalyst by Evonik. Used in the production of polyester slabstock foam... view more
Dabco® NE1070 by Evonik is a non-emissive amine catalyst. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible foam applications to meet automotive... view more
Applications
Dabco® NE1090 by Evonik acts as a novel non-fugitive gelling catalyst. It has the ability to react chemically into the polyurethane foam matrix, thereby it do not contribute to emissions. Exhibits... view more
Dabco® NE210 is a balanced non-emissive amine catalyst by Evonik. Offers no amine catalyst emissions, no VOC emissions, no vinyl staining and no windshield fogging. Possesses master batch stability... view more
Applications
Dabco® NE300 by Evonik is a non-emissive amine catalyst. Promotes the urea (water isocyanate) reaction. It reacts into the polyurethane matrix, thereby not contributing to emissions. Offers no amine... view more
Applications
Dabco® NE310 is a non-fugitive, non-emissive reactive amine catalyst by Evonik. Provides good resin-side stability. Compatible with other commonly used polyurethane catalysts and additives. Promotes... view more
Applications
Dabco® NE320 is a high purity, fourth generation no-emission (NE) blow catalyst by Evonik. It binds chemically into the polyurethane foam matrix while maintaining foam properties in MDI or TDI... view more
Applications
Dabco® NE500 by Evonik acts as a non-emissive amine catalyst. It is used in flexible slabstock applications to meet Certipur® or LGA requirements. Shows equivalent foam physical properties, master... view more
Dabco® NE600 is a balanced non-emissive amine catalyst by Evonik. It reacts into the polyurethane matrix, thereby not contributing to emissions. It is used in flexible slabstock applications to meet... view more
Dabco® PE40 by Evonik acts as a processing aid. It is an excellent melamine stabilizer. It allows solid powder to well stabilize in polyols when pre-mixing solid powders and polyols especially in... view more
Dabco® PM300 by Evonik is a blowing agent enhancer. It significantly reduces the level of conventional surfactant required. It produces fine uniform cells and reduces polyol side viscosity. Improves... view more
Dabco® PM301 by Evonik acts as a surfactant. Designed to improve the efficiency of blowing agents used in rigid polyurethane foam, in particular spray foam. Offers a reduction in the use level of... view more
Applications
Dabco® PT302 by Evonik is a high efficiency tertiary amine catalyst. It can be used in rigid foam applications, especially rigid spray foam. Dabco® PT302 strongly catalyzes the reaction of polyol... view more
Dabco® PT303 is a high efficiency tertiary amine catalyst by Evonik. It strongly catalyzes the urea (water-isocyanate) reaction for rigid spray polyurethane foam... view more
Dabco® PT304 by Evonik is a high efficiency amine, medium trimer catalyst. It can improve post cure and adhesion strength. Dabco® PT304 can be used in rigid spray foam... view more
Dabco® PT305 is a reactive amine catalyst. Offers improved post-cure, dimensional stability and lower odor. Used for rigid polyurethane foam... view more
Dabco® PT306 by Evonik acts as a highly efficient gelling amine catalyst. Provides better foam density distribution. It is developed for reducing hydrolysis and improving system stability... view more
Dabco® RP202 by Evonik is a non-emissive balanced amine catalyst. It binds chemically into the PU foam matrix eliminating contributions to odor and VOC emissions. It increases the airflow, improves... view more
Dabco® RP203 by Evonik acts as a balanced tertiary amine catalyst. Provides excellent performance in methylene chloride-blown flexible slabstock foams. Compatible with other blowing agents. It... view more
Dabco® RP204 by Evonik is a non-emissive amine catalyst promoting a balance of urethane and urea reactions with high efficiency and wide processing latitude. Possesses excellent foam stability that... view more
Applications
Dabco® RP205 by Evonik acts as an amine catalyst. Used in making low-density flexible slabstock foam that can provide wide process latitude... view more
Dabco® S-25 is an amine catalyst by Evonik. It is a solution of 25% triethylenediamine (TEDA) and 75% butanediol. Acts as a strong urethane catalyst that is commonly used for shoe sole applications... view more
Dabco® SCOBA AS45 is a liquid antioxidant system by Evonik. Used in polyether and polyester flexible slabstock applications... view more
Applications
Dabco® SI1103 surfactant by Evonik is a silicone stabilizer. It has been developed especially for systems characterized by self-supporting performance, where cell regulation is critical. Typical... view more
Dabco® SI1301 surfactant by Evonik is a low emission cell regulator. It is typically combined with a strong bulk stabilizer. This dual surfactant approach offers improved formulating latitude for... view more
Applications
Dabco® SI1303 by Evonik acts a low VOC and low fogging medium efficiency silicone surfactant. Also acts as a bulk stabilizer for cold cure MDI and MDI-TDI-based systems. It is developed for cold... view more
Dabco® SI1304 by Evonik is a low VOC and low fogging medium efficiency silicone surfactant. Possesses excellent surface stability as well as excellent vent stability and excellent foam surface... view more
Dabco® SI2301 by Evonik is a silicone surfactant. Exhibits low VOC emissions that enable to meet Certipur®, OEKO-TEX® or LGA-tested for contaminants emission requirements for flexible slabstock... view more
Dabco® SI2302 by Evonik is a silicone surfactant. Provides optimum balance of stabilizing and cell regulating and produces open cell foam. Exhibits very low VOC emissions that enable to meet... view more
Dabco® SI3101 by Evonik is a silicone surfactant. Possesses excellent foam surface quality with reduced voids. It is a non-hydrolyzable structure for excellent premix stability; good compatibility... view more
Dabco® SI3102 by Evonik is a silicone surfactant. Provides very efficient emulsification, nucleation and stabilization, resulting in fine, uniform foams with excellent insulation properties... view more
Dabco® SI3201 by Evonik acts as a silicone surfactant. Provides very efficient emulsification, nucleation and stabilization, resulting in fine as well as uniform foams with excellent insulation... view more
Dabco® SI3202 is a silicone surfactant by Evonik. It has non hydrolysable structure for excellent premix stability and good compatibility with rigid foam polyol pre-blends. Exhibits low viscosity... view more
Dabco® SI3203 is a silicone surfactant by Evonik. Provides very efficient emulsification, nucleation and stabilization, resulting in fine as well as uniform foams with excellent insulation... view more
Dabco® SI3501 by Evonik acts as a silicone surfactant. It produces fine, uniform cells resulting in excellent λ-values. It has non hydrolysable structure for excellent premix stability and good... view more
Dabco® SI3503 by Evonik acts as a silicone surfactant. It is also acts as a stabilizer for most conventional polyurethane systems. It has non hydrolysable structure for improved premix stability and... view more
Dabco® SI3504 by Evonik is a silicone surfactant. In OCF applications, it will stabilize the foam structure and assist greatly in prepolymer compatibility. In rigid lamination systems, it has shown... view more
Dabco® SI4202 by Evonik acts as a high performance surfactant. Provides excellent flame retardant properties in rigid foam applications and facilitates excellent cell structure in shoe sole... view more
Evonik
Dabco® T by Evonik is a non-emissive amine catalyst. It promotes the urea (isocyanate - water) reaction. Due to its reactive hydroxyl group it readily reacts into the polymer matrix. Provides smooth... view more
Dabco® T-12 by Evonik acts as a catalyst based on dibutyltindilaurate. Used in the manufacture of rigid polyurethane foams. Promotes rapid gelation and tack-free times. Dabco® T-12 improves... view more
Dabco® T-120 by Evonik is an organotin gel catalyst. Used in shoe sole polyurethane formulations and rigid polyurethane foams. Offers improved atmospheric stability. Dabco® T-120 provides high... view more
Dabco® T-125 by Evonik acts as a lead-free metal catalyst. Compatible with amine co-catalysts. Offers high catalytic activity, selectivity to the urethane (polyol-isocyanate) reaction and improved... view more
Dabco® T-131 by Evonik is a high-activity organotin gelation catalyst used in a broad range of polyurethane foam and elastomer formulations. It was specially developed to provide delayed-action... view more
Evonik
Dabco® T-9 by Evonik is stannous octoate- based catalyst. Used in flexible slabstock polyether foams. Offers uniform activity and very good stability... view more
Dabco® T900 by Evonik acts as a stannous octoate replacement metal catalyst. Offers uniform activity and similar usage levels as well as material handling to stannous octoate. It can be used with... view more
Evonik
Dabco® TL by Evonik acts as a sole amine catalyst. It has fine and uniform cell structure. Offers reduced amine emissions and wide processing latitude. It eliminates foam buildup at trough lip... view more
Evonik
Dabco® TMR by Evonik is a tertiary amine catalyst. It promotes the polyisocyanurate reaction (trimerization). Provides a uniform and controlled rise profile compared to potassium based catalysts... view more
Applications
Dabco® TMR 30 by Evonik is an amine-based, delayed action urethane reaction catalyst. It is a weak trimerization catalyst. Dabco® TMR 30 can be used for rigid polyisocyanurate foams... view more
Dabco® TMR-12 by Evonik is a trimerization catalyst. Provides formulators with the necessary tools for tailoring isocyanurate foam reactivity to meet processing needs. Possesses easy processing and... view more
Dabco® TMR-2 by Evonik is a tertiary amine catalyst. It promotes the polyisocyanurate trimerization reaction. Provides a uniform and controlled rise profile compared to potassium based catalysts... view more
Dabco® TMR-25 by Evonik is a trimerization catalyst. Possesses a smooth rise profile. Suitable for formic acid blown systems. Dabco® TMR-25 catalyst is used to produce polyisocyanurate foam in the... view more
Dabco® TMR-3 by Evonik is an amine-based, delayedaction trimerization catalyst. Recommended for the production of polyisocyanurate foam... view more
Dabco® TMR-4 is a trimerization catalyst by Evonik. Used for rigid polyisocyanurate foams including pour-in-place systems, including entry doors, building panels and walk-in cooler panels. Dabco®... view more
Dabco® TMR-7 by Evonik acts as an amine-based trimerization catalyst. It is odorless and permits higher indexes. Offers improved edge cure and reduced density. Dabco® TMR-7 is recommended for the... view more
Dabco® XD-102 is an amine catalyst by Evonik. It is diluted in mono-ethylene glycol. Used in low density microcellular polyurethane foams to significantly improve the foam flowability. Dabco® XD-102... view more
Dabco® XD-103 is a tertiary amine catalyst by Evonik. It enables the production of high quality, low density shoe soles that can be used in both polyester and polyether microcellular systems... view more
Dabco® XD-104 by Evonik is a high efficiency tertiary amine catalyst. Offers improved flowability and surface structure. Provides faster demold time. Dabco® XD-104 is used in shoe sole foam system... view more
Evonik
Dabco® XDM by Evonik acts as a catalyst. Used primarily in flexible polyester foam... view more
Evonik
Organotin gelation. Used in HR foams. Offers improved foam breathability. Provides increased load-bearing properties... view more
Mixture of 33% triethylenediamine and 67% 1.4 butanediol. Used as polyurethane catalyst... view more
Dabco® 8420 by Evonik can improve overall curing performance. Dabco® 8420 is recommended for thermoplastic polyurethane resin and lamination... view more
Applications
Dabco® BL-16 by Evonik is an n-cetyl-n,n-dimethylamine-based curing agent. Used in polyester die cuttable flexible slabstock foams, integral skin and microcellular systems. Dabco® BL-16 provides... view more
Dabco® BL-22 by Evonik is amine-based catalyst. Dabco® BL-22 is used in semi-flexible molded foam, integral skin, microcellular systems and a wide variety of rigid foams. Dabco® BL-22 is designed... view more
Dabco® BL-53 by Evonik is tertiary amine-based catalyst. Dabco® BL-53 is recommended for thermoplastic polyurethane... view more
Dabco® DC197 by Evonik is a silicone glycol copolymer-based emulsifier. Used in high-density rigid molded foam applications. Offers very good flowability and adhesion. Dabco® DC197 possesses low... view more
Silicone surfactant. Provides lower fogging performance. Exhibits improved cell opening... view more
Dabco® DC3041 by Evonik is non-hydrolyzable silicone glycol copolymer-based foaming agent. Dabco® DC3041 is used in shoe sole applications... view more
Dabco® DC4000 by Evonik is silicone surfactant. Used in flexible polyester slabstock foams. Dabco® DC4000 offers low fogging characteristics... view more
Dabco® DC4020 by Evonik is a silicone stabilizer used for various polyester flexible slabstock foam and thermoplastic polyurethane. Dabco® DC4020 provides very good foam stability and very open... view more
Dabco® DC5169 by Evonik is silicone-based emulsifier. Used in TDI, MDI/TDI and MDIbased cold cure flexible molded polyurethane foam systems. Offers foam stabilization. Possesses very fine foam cell... view more
Dabco® DC5384 by Evonik is silicone-based emulsifier. It is used in molded rigid foams. Offers improved flow by reducing friction at the mold/polymer interface. Dabco® DC5384 enhances cell opening... view more
Surfactant was developed specifically for use in pentane blown rigid foam... view more
Dabco® DC5580 by Evonik is a nonhydrolyzable silicone glycol copolymer-based foaming agent. Dabco® DC5580 is recommended for thermoplastic polyurethane... view more
Applications
Dabco® DC5588 by Evonik is a foaming agent. Dabco® DC5588 is silicone glycol copolymer and suitable for thermoplastic polyurethane... view more
Applications
Medium-efficiency silicone surfactant. Provides reduced force-to-crush in molded systems... view more
Applications
Dimethylethanolamine. Used in polyether flexible slabstock foams, MDI high resiliency flexible molded foams, rigid bunstock and energy absorbing non-recoverable rigid systems. Offers balanced... view more
Dabco® H-1010 by Evonik is a low-corrosivity, controlled-activity (delayed) catalyst. Dabco® H-1010 is used in flexible molded polyurethane foams. It is recommended for blow molding... view more
Dabco® Kitane 20 AS by Evonik is a compatibilizer. Dabco® Kitane 20 AS is used in hydrocarbon blown rigid foam applications and laminating... view more
Applications
Dabco® LK665 by Air Products is a non-silicone surfactant. Possesses excellent emulsification capability. Produces symmetrical and round foam cell structure. Provides excellent dimensional stability... view more
Evonik
Dabco® MC by Evonik is a delayed-action amine blowing catalyst. Dabco® MC is used in slabstock foams... view more
Dabco® MD02 by Evonik is a balanced, delayed-action catalyst. It is recommended for flexible blow molded foam applications... view more
Dabco® MD18 by Evonik is a balanced, delayed-action catalyst. Dabco® MD18 is recommended for flexible blow molded foam application... view more
Dabco® MD45 by Evonik is a gelation catalyst. Dabco® MD45 is used in the production of flexible and semi-flexible molded and rigid PIR foams... view more
Dabco® NE 200 by Evonik is a novel non-emission(NE) gelling catalyst. Used in the production of all types of flexible molded polyurethane foam. Dabco® NE 200 offers very good foam flow properties... view more
Applications
Dabco® NE1060 by Evonik is a novel non-emission (NE) gelling catalyst. Used in the production of all types of flexible molded polyurethane foam. Dabco® NE1060 offers very good foam flow properties... view more
Applications
Low-viscosity liquid amine catalyst. Used in semi-flexible and rigid polyurethane foam... view more
Dabco® T-10 by Evonik is a stannous-type catalyst. Dabco® T-10 is used for flexible slabstock applications. It is recommended for thermoplastic polyurethane... view more
Stannous-type catalyst. Used for slabstock foam... view more
Stannous-type catalyst. Used for flexible slabstock foam... view more
Applications
Stannous-type catalyst. Used for flexible slabstock polyethere foams and sealants... view more
Stannous-type catalyst. Used in polyether flexible slabstock foam... view more
Applications
Isocyanurate catalyst. Used for all types of polyisocyanurate (PIR) foam systems, including rigid boardstock and pour-in-place systems. Also used in semi-flexible molded foams... view more
Evonik
Delayed-action amine catalyst for use in all types of polyurethane foam... view more
BASF Antioxidants
Back to Top