OK

Product Library

Browse thru various additives product lines:
One-Packs
Heat Stabilizers and Antioxidants
Light Stabilizers
Processing Aids
Modifiers
AP-Nylon® Materials

BRUGGOLEN® Compounding Additives
Product Composition Characteristics
Processing One-Pack for Polyamides
BRUGGOLEN® P30
BRUGGOLEN® P31
Mixture of functional additives
  • Ready-to-use package for recycling and upgrading PA
  • Improved melt flow during processing
  • Protection of the polymer against degradation caused by sheer stress
  • Basic stabilization against thermal degradation and yellowing during processing
  • Reduction of overall cycle time
  • Better surface of finished parts
  • Better mould release of finished parts
  • Reduced post - shrinkage
  • Better dimensional stability
  • Less warpage, avoidance of stresses
  • Increased tear strength and stiffness
BRUGGOLEN® H (Heat Stabilizers and Antioxidants)
BRUGGOLEN® H10 Inorganic phosphonate
  • Processing stabilizer against discoloration and degradation
  • Co-stabilizer to antioxidants
  • Prolonging lifetime of polymers under heat ageing conditions
  • Protection against yellowing under outdoor conditions (UV-light)
  • Very low volatility
  • Heat stable at highest processing temperatures
  • Very effective in the regeneration of fibre waste materials
BRUGGOLEN® H161 Mixture of sterically hindered phenolic
antioxidants and phosphonates
  • Long term heat stability in applications up to 150°C
  • Efficient process stabilization against yellowing and degradation
  • Low volatility during processing
  • Excellent compatibility, low extractability
  • High efficiency especially in glass-fiber reinforced or mineral-filled polyamides
  • Complete dispersion, giving clear transparent films and fibers
BRUGGOLEN® H164 Mixture of sterically hindered phenolic
antioxidants and phosphonates
  • Long term heat stability in applications up to 150°C
  • Efficient process stabilization against yellowing and degradation
  • Low volatility during processing
  • No deposits (‘plate – out’) on the finished parts after conditioning
  • Excellent compatibility, low extractability
  • Long term protection of bright colored polymers against yellowing
BRUGGOLEN® H175 Mixture of sterically hindered phenolic
antioxidants and phosphonates
  • Long term heat stability in applications up to 150°C
  • Efficient process stabilization against yellowing and degradation
  • Best protection of organic pigments against discoloration at high processing temperatures up to approx. 320°C
  • Low volatility during processing
  • Excellent compatibility, low extractability
  • Long term protection of bright colored polyamides against yellowing under aggressive conditions (heat, moisture, chemicals)
  • High efficiency especially in glass-fiber reinforced or mineral-filled polyamides
BRUGGOLEN® H180 Mixture of sterically hindered phenolic
antioxidants and nitrogen-based
co-stabilizers
  • Efficient process stabilization against yellowing and degradation
  • Notable improvement of the quality during regeneration of polyacetals
  • Long-term protection against thermal degradation
  • Reduction respectively suppression of the formation of formaldehyde
  • Improvement of the surface quality of the finished parts
  • Long term protection of bright colored polyacetals against yellowing
  • Low volatility during processing
  • Excellent compatibility and low extractability
BRUGGOLEN® H320
BRUGGOLEN® H321
Synergistic composition of cuprous and halogen compounds along with an effective lubricant
  • Long - term protection of high performance polyamides against embrittlement under maximum service temperature stress
  • Powerful protection against premature fatigue of mechanical properties under aggressive conditions caused by high temperatures, chemicals or weathering
  • Maintenance of surface gloss over a long period of time
  • Characteristic green discoloration after conditioning
BRUGGOLEN® H324 Synergistic composition of cuprous and halogen compounds along with an effective lubricant
  • Long - term protection of high performance polyamides against embrittlement under maximum service temperature stress
  • Powerful protection against premature fatigue of mechanical properties under aggressive conditions caused by high temperatures, chemicals or weathering
  • Maintenance of surface gloss over a long period of time
  • Contains only halogens based on iodine
BRUGGOLEN® H328F
BRUGGOLEN® H329F
Synergistic composition of cuprous and halogen compounds along with an effective lubricant
  • Cost - performance optimized, long - term protection of polyamides against embrit­tlement under maximum service temperature stress.
  • Powerful protection against premature fatigue of mechanical proper­ties under aggressive conditions caused by high temperatures, chemicals or weathering.
  • Fine particle size leads to a very homogeneous dispersion in the compound and an efficient and consistent stabilization performance in comparison to standard products
BRUGGOLEN® H3336
Mixture of copper complexes and synergysts
  • Long-term stabilization against loss of mechanical properties up to 180°C
  • Effective processing stabilization against polymer degradation
  • High extraction resistance against water, alcohols, fats, oils, glycols, organic solvents etc.
  • No deposits (‘plate – out’) on the surface of the finished parts
  • No negative influence on the electrical properties of the finished parts
  • Maintenance of surface gloss over a long period of time
  • Very little discoloration, also under heat ageing conditions; thus suited for light colors
  • Very homogeneous dispersion in the compound and an efficient and consistent stabilization performance in comparison to standard products
BRUGGOLEN® H3344
Mixture of antioxidants based on copper
compounds and synergists
  • Long-term stabilization against loss of mechanical properties up to 180°C
  • Effective processing stabilization against polymer degradation
  • Complete solubility in polyamides, no deposits in filter packs, no interruption of the spinning process
  • High extraction resistance against water, alcohols, fats, oils, glycols, organic solvents etc.
  • Improved properties of tyre cord, less migration of copper ions into the rubber,
  • No deposits (‘plate – out’) on the surface of fibers
  • Maintenance of surface gloss over a long period of time
BRUGGOLEN® H3350
BRUGGOLEN® H3351
Mixture of antioxidants based on complex
copper compounds and synergists.
  • Natural colors; no discoloration after processing and conditioning. Thus suitable for natural colors and bright colorations
  • Very small color change ∆E of the polyamide under UV irradiation
  • Well suited for E&E applications
  • Very good long-term stabilization against loss of mechanical properties up to 180°C and good results for the heat stabilization of PA 6.6 at temperatures up to 210°C
  • Effective processing stabilization against polymer degradation
  • No deposits (‘plate-out’) on the surface of the finished parts
  • High extraction stability
BRUGGOLEN® H3376
BRUGGOLEN® H3377
Synergistic composition of a copper complex and halogen compounds
  • Suitability for light or natural colored polyamides
  • No discoloration after processing and conditioning
  • Long-term stabilization against fatigue of mechanical properties at thermal exposure up to 180°C
  • Specific suitability for E/E applications; CTI up to 600V possible
  • Full solubility in the polymer melt, thus well suited for fiber spinning
  • Homogeneous properties of finished parts
BRUGGOLEN® H3386
BRUGGOLEN® H3387
Mixture of copper complex based antioxidants and suitable synergists
  • Very good long term heat stabilizer to service temperatures up to 180°C
  • Suitability for light or natural colored polyamides
  • No discoloration during processing and after conditioning.
  • Suitable for natural colors and bright colorations
  • Very little discoloration upon thermal aging Suited for E&E-applications
  • Excellent long term stabilization against loss of mechanical properties at temperatures up to 180°C
  • Effective process stabilization against polymer degradation
  • No plate-out on surface of finished parts, high extraction stability
BRUGGOLEN® L (Light Stabilizers)
BRUGGOLEN® L11 Mixture of heat stabilizers and optical brightener
  • Compensation of yellow discoloration caused by degradation during processing or by long-term exposure to light
  • Whitening agent, especially in polyamides
  • Brightening agent along with inorganic pigments, especially in white colored applications, improving yield and gloss of pigments
  • Processing stability up to processing temperatures of 320°C
  • Excellent compatibility to polymers, low extractability
BRUGGOLEN® L20 Mixture of antioxidants, UV-stabilizers and
processing stabilizers
  • Long term UV-stability in outdoor applications
  • Good surface gloss over a long period of time
  • Long-term heat stability up to 150°C
  • Low volatility during processing
  • Efficient process stabilization against yellowing and degradation
  • Excellent compatibility to polymers, low extractability
BRUGGOLEN® L206 Mixture of hindered amine light stabilizer,
sterically hindered phenolic antioxidants,
phosphonates and lubricants
  • Long term UV-stability in outdoor applications
  • Good surface gloss over a long period of time
  • Long-term heat stability up to 150°C
  • Low volatility during processing
  • Efficient process stabilization against yellowing and degradation
  • Excellent compatibility to polymers, low extractability
BRUGGOLEN® P (Processing Agents)
BRUGGOLEN® P14 Synergistic composition of lubricants
  • Improvement of melt flow rate
  • High efficiency due to excellent thermal stability and low volatility
  • Improved surface finish of the injection molded part
  • Improvement of mold release of the injection molded part
  • Reduction of shear forces
  • Wider process window
  • Increase of throughput in extrusion and compounding processes
BRUGGOLEN® P130 Synergistic composition of lubricants
  • Improved melt flow of the polymer melt
  • Protection of the polymer against damage due to reduced friction
  • Very low volatility, very good compatibility
  • Good temperature stability, minimum discoloration
  • Improved surface (high gloss) of the finished parts in injection molding
  • Improved mould release of the finished parts in injection molding
  • Improved feeding behavior of the plastic granules in the processing machine
  • Acceleration of the compounding or injection molding process
BRUGGOLEN® P22 Mixture of nucleating agents
  • Reduction of overall cycle time, because of that higher production rates are achieved.
  • Improved mould release
  • Improved dimensional stability of the finished product
  • Reduction of post – shrinkage of the finished product
  • Prevention of stress cracking of the finished product
  • Improvement of mechanical properties (Increase of tensile strength and stiffness
BRUGGOLEN® P60 Liquid adhesive and dispersion agent
  • Reduced separation of chips and powdery additives e.g. during transport
  • Improved dry blend quality - good adhesion of additives to the chips in dry blend production
  • Improvement in dispersion of additives or fillers
  • Improvement of melt flow
  • Improved surface finish of the injection molded part
BRUGGOLEN® P252 Mixture of nucleating agents
  • Reduction of overall cycle time, thus higher production rates
  • Improvement of mould release
  • Improvement of dimensional stability of the finished part
  • Reduction of post – shrinkage of the finished part
  • Prevention of stress cracking of the finished part
  • Improvement of mechanical properties (Increase of tensile strength and stiffness)
  • Improvement of surface gloss, less streaks
BRUGGOLEN® M (Modifiers)
BRUGGOLEN® M1251 Modified polyamide for chain extension
  • Increase of melt viscosity
  • Improvement of impact strength
  • Increased elongation at break in glass reinforced polyamides
  • No influence on the homogeneity of the polyamide melt
  • No formation of gel structures
BRUGGOLEN® M1253 Modified polyamide for chain extension
  • Increase of melt viscosity
  • Improvement of impact strength Increased elongation at break in glass reinforced polyamides
  • No influence on the homogeneity of the polyamide melt
  • No formation of gel structures
  • Higher consistent addition due to micro-granular size
  • Suitable for fiber spinning process due to better dispersion of micro-granules


AP-Nylon® Materials
Product Function Characteristics
BRUGGOLEN® C additives for the production of cast polyamide
BRUGGOLEN® C10 Highly efficient catalystnt Highly efficient solid catalyst for anionic polymerization of caprolactam with quick reaction times at low temperatures.
BRUGGOLEN® C20P Highly efficient activator Highly efficient solid activator for anionic polymerization of caprolactam with quick reaction times at low temperatures.
BRUGGOLEN® C235 New, highly efficient liquid activator Highly efficient  liquid activator for anionic polymerization of caprolactam with quick reaction times at low temperatures. To our knowledge BRUGGOLEN® C235 is the only liquid activator without usage of N-Ethyl-Pyrrolidon (NEP). NEP is a substance of very high concern and limitations of its use are expected.
BRUGGOLEN® C540 Highly efficient impact modifier BRUGGOLEN® C540 improves the impact strength of anionic polymerized casted or roto-molded caprolactam.
A-P Nylon® Caprolactam Products
AP-Nylon® Caprolactam Caprolactam Flakes for anionic polymerization (Brüggemann Brand) AP-NYLON® Caprolactam comes at lowest technical possible water contents to achieve reproducable anionic polymerization performance at any time.

Back to Top