HECO®

HECO® CLEAN 4 PE by HECOPLAST is a 22% mixture of a physically active component and fatty acid. Acts as a slip agent. It is a non-abrasive, rheological acting cleaning mixture in PE. All fluid... view more

HECO® CLEAN 4 PP by HECOPLAST is a 22% mixture of a physically active component and fatty acid. It is a non-abrasive, rheological acting cleaning mixture in PP. Acts as a slip agent. All fluid... view more

HECO® ELAST 700 PO by HECOPLAST is a high molecular weight thermoplastic mixture. It acts as an elasticity and frosting effect modifier. Due to the material matrix, HECO® ELAST 700 PO supports the... view more

HECO® ELAST 705 PO by HECOPLAST is a thermoplastic plastomer with a very high elasticity component (105 mm3) according to ASTM D 790. It acts as an elasticity and soft-touch modifier. It is widely... view more

HECO® ELAST 706 PO by HECOPLAST is a high molecular weight thermoplastic mixture. It acts as a soft-touch and frosting effect modifier. It supports the high elasticity of the polymers and their... view more

HECO® ELAST 708 PO by HECOPLAST is a high molecular weight thermoplastic mixture. It acts as a soft-touch and frosting effect modifier. It supports very high elasticity of the polymers and their... view more

HECO® FOAM 900 C by HECOPLAST is a 100% endothermic system of the very fine components without carrying agent. Acts as a blowing agent. It has a starting temperature of about 150 °C. The optimum gas... view more

HECO® FOAM 940 PE by HECOPLAST is a 40% endothermic system on a PE carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

HECO® FOAM 940 S by HECOPLAST is a 40% endothermic system on a PS carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

HECO® FOAM 970 PO by HECOPLAST is a 70% endothermic system on a PE carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

HECO® NOX 605 PA by HECOPLAST is a 20%, combination of primary and secondary antioxidant in PE. Acts as an antioxidant and light stabilizer. It offers a very high extraction resistance, high... view more

HECO® NOX 625 PE by HECOPLAST is a 20% combination of primary and secondary antioxidant in PE. It prevents the damage to polymer chain which is usually caused by catalyst residues by saturation of... view more

HECO® NUK 425 PE by HECOPLAST is a 30% mixture of organic and inorganic active substances. Acts as a nucleating agent. It provides highly effective polymer nucleation for all PE-types with a very... view more

HECO® NUK 484 PP by HECOPLAST is a 17% organic active substance in PP. Acts as a mold releasing agent, surface scratch modifier and nucleating agent. It meets very high transparency requirements... view more

HECO® NUK 485 PP by HECOPLAST is a 20% organic active substance in PP. Acts as a mold releasing agent, anti-scratch and nucleating agent. It meets very high transparency requirements with regard to... view more

HECO® NUK 487 PP by HECOPLAST is a 10% organic active substance in PP. Acts as a mold releasing agent, anti-scratch and nucleating agent. It meets very high transparency requirements with regard to... view more

HECO® NUK 488 PP by HECOPLAST is a 10% specific nucleating additive. It contains friction inhibitor. It meets high transparency requirements and is distortion-free. It is free of all fatty acids... view more

HECO® SLIP 103 PO by HECOPLAST is a 100% carbonic acid ester. Acts as a release, slip, anti-static and dispersing agent. Provides very high quality slip, release, dispersing and antistatic... view more

HECO® SLIP 112 PE by HECOPLAST is a 20%, high purity, high temperature stable primary fatty acid in PE. Acts as a release, anti-scratch and slip agent. Provides very high quality sliding and... view more

HECO® SLIP 114 PP by HECOPLAST is a 20% high purity, high temperature stable primary fatty acid in PP. Acts as a release, anti-scratch and slip agent. It offers very high-quality sliding and... view more

HECO® SLIP 120 PE by HECOPLAST is a 20% carbon fatty acid on a carrier supporting the sliding action, corresponds to the EC-RL 67/548. Acts as a release, semi-nucleating and slip agent. It increases... view more

HECO® SLIP 122 PE by HECOPLAST is a 22% of fatty acid on PE carrier. Acts as a release, semi-nucleating and slip agent. It increases output and counteracts residues in the plastification unit... view more

HECO® SLIP 123 PP by HECOPLAST is a 22% of fatty acid on PP carrier. Acts as a semi-nucleating, mold release and slip agent. It leads to higher output and counteracts residues in the plastification... view more

HECO® SLIP 150 PE by HECOPLAST is a 10% high purity, high temperature stable primary fatty acid in PE. Acts as a release, anti-blocking and slip agent. It is a high quality cream colored... view more

HECO® SLIP 152 PO by HECOPLAST is 100 % of a high purity, high temperature stable primary fatty acid without a carrier polymer. Acts as a release, anti-blocking and slip agent. It is offered as... view more

HECO® SLIP 161 PP by HECOPLAST is a 5% highly pure, high temperature stable primary fatty acid in PP. Acts as a release, anti-scratch and slip agent. It offers very high-quality sliding and... view more

HECO® STAB 311 PE by HECOPLAST is a 15-20% polymer hindered amine with the combination of phenolic antioxidant and phosphite. Acts as an antioxidant and light stabilizer. It shows exceptionally high... view more

HECO® STAB 317 PP by HECOPLAST is a 10 % UV light protection absorber with very high thermal stability (265°C). Exhibits very high acid and alkali resistance. It protects the polymer from... view more

HECO® STAB 372 PP by HECOPLAST is a 20% HALS stabilizer, hindered amine. Acts as an antioxidant and light stabilizer. Offers excellent UV resistance and very low diffusion tendency. It shows... view more

HECO® STAB 376 PP by HECOPLAST is a 25% sterilization additive for ? irradiation. Acts as an antioxidant and light stabilizer. It provides excellent resistance with the least tendency to diffuse. It... view more

HECO® STAT 223 PE by HECOPLAST is a 12% short-long term antistatic agent. It is a combination of chemically-physically acting, non-ionic compounds, total content of 16% for articles in the packaging... view more

HECO® STAT 224 PP by HECOPLAST is a 12% short-long term antistatic agent. Also acts as a release and anti-block agent. It is a combination of chemically-physically acting, non-ionic compounds, total... view more

HECO® STAT 290 by HECOPLAST is a 100% high temperature anionic internal and external antistatic agent. Also acts as a mold release and slip agent. It shows exceptionally high temperature resistance... view more

HECO® STAT 291 by HECOPLAST is a 3% HECO® STAT 290 in 97% of water. Acts as an antistatic, mold release and slip agent. It is a very cost-effective alternative with the lowest product cost. It is... view more