STRUKTOL® SU 135A by Struktol is a rubber curing agent. It is a preparation of insoluble sulfur. When using insoluble sulfur, blooming from the green compound can be avoided. Blooming can be avoided... view more

STRUKTOL® ZP 1014 by Struktol is a pourable cross-linking agent. It is a preparation of zinc peroxide with 50% active substance (min. 55% ZnO2), with inorganic dispersing agent (3%) and organic... view more

STRUKTOL® Zimag 29/43 by Struktol is a curing/crosslinking agent. It is an optimal composition of zinc oxide and magnesium oxide. This pourable powder offers improved dispersion and fast... view more

STRUKTOL® Zimag 29/43A by Struktol is a crosslinking agent for chloroprene compounds. It is a free-flowing granulate consisting of 29% zinc oxide, 43% magnesium oxide and 28% wetting & dispersing... view more

Fujicure™ 1061 by T&K TOKA is a modified amine-based, latent curing agent and hardener for epoxy resin. It is solid at ambient temperature and is activated by heat. It has excellent adhesiveness and... view more

Fujicure™ 1171 by T&K TOKA is a modified amine-based latent curing agent and hardener for epoxy resin. It is solid at ambient temperature and is activated by heat. It also acts as a curing accelerator... view more

Dimeric 2, 4-toluene diisocyanate. Acts as vulcanizing agent and adhesion promoter. It is a white powder with yellow tint. It is soluble in toulene, chlorobenzene and o-dichlorobenzene. It can act... view more

CASAMID® 710 by Thomas Swan is an accelerator for vulcanization of natural and synthetic rubber. It is a curing agent of the substituted dicyandiamide type. It provides accelerated cure speed, improved... view more

BP 75-W by United Initiators is dibenzoyl peroxide that acts as an initiator (radical source) in the polymerization of monomers, e.g. styrene, vinyl acetate, (meth-)acrylates, allyl compounds. It... view more

DCUP by United Initiators acts as an initiator (radical source) in the polymerization of monomers, eg. styrene and as a synergetic co-agent for flame retardants in expandable polystyrene (EPS). It... view more

Varox® 130-XL by Vanderbilt Chemicals is an organic peroxide accelator. It is used as vulcanizing agent for EPDM, EPM, CPE and cross-linking agent for PE & EVA... view more

Varox® DBPH-50 by Vanderbilt Chemicals is an organic peroxide accelerator. Used for the vulcanization or cross-linking of most elastomers and polyolefins such as EPDM, EPM, and PE. Varox® DBPH-50 is... view more

Varox® DBPH-50 EZD by Vanderbilt Chemicals is an organic peroxide accelerator. It is suitable for the vulcanization or crosslinking of most elastomers and polyolefins such as EPR, EPDM, NBR, PE and... view more

V-65 by Wako Chemicals is a 2,2'-azobis(2.4-dimethyl valeronitrile). It is a solvent-soluble azo initiator. It is soluble in various solvents and has 10 hour half-life. It is employed in various... view more

VA -044 by Wako Chemicals is a non-nitrile, photocurable, water-soluble, cationic azo polymerization initiator. It is 2,2'-azobis[2-(2-imidazolin-2-yl)propane]dihydrochloride. It possesses a 10 hour... view more

Alkylphenol disulphide. Acts as a vulcanizing agent. It has excellent heat resistance and high tensile strength. It shows tackifying and oxidation resisting effects. It can substitute sulfur or DTDM... view more