KRATON™ G1726 by Kraton is a thickening agent and viscosity modifier. It is a styrene-ethylene-butylene-styrene (SEBS) linear polymer with a tri-block structure. It shows excellent compatibility... view more

Kane Ace™ PA-30 by Kaneka is a processing aid with lubricant effect. It is suitable for injection molding, calendaring, blow molding and foamed extrusion. Kane Ace™ PA-30 is used in packaging, pipes and... view more

Kane Ace™ PA-10 by Kaneka is a processing aid. It shows good compatibility with thermoplastic. It also shows lubricant effect. It delays the time for maximum torque and time of degradation. It... view more

Baymod® PU-A is aliphatic polyester urethane. Acts as a plasticizer. When mixed with PVC, it is oil, grease and solvent resistant, non-volatile, resistant to- abrasion and tear propagation... view more

Uniplex 260 by Rhein Chemie Lanxess Group is a glyceryl tribenzoate. Acts as a plasticizer and processing aid. It promotes heat-sealability and adhesion, and creates a moisture barrier. It is... view more

Uniplex 512 by Rhein Chemie Lanxess Group is a neopentyl glycol dibenzoate. It is a low melting, waxy, solid plasticizer and processing aid. It has low volatility and a good ultraviolet light... view more

Expandex® 5-PT by Lanxess is 5-phenyltetrazole-based foaming agent. It is recommended for use with engineering polymers. Its high decomposition temperature helps to eliminate premature decomposition... view more

Genitron® VP KA 9175 by LANXESS is a sodium bicarbonate preparation-based blowing agent. It is used in extrusion processes of rigid PVC, where the use of azodicarbonic acid di-amide is not possible... view more

LUVOBATCH® EA BA 5350 by Lehmann & Voss is an endothermal blowing agent. It offers avoidance of post-inflation, safe dosage, short cycle times, decorative effects and good dispersion. It is a dust-free, low-cost... view more

LUVOBATCH® EV BA 5335 by Lehmann & Voss is an exothermic blowing agent. It is a dust-free, low-cost masterbatch microgranulate form. It exhibits controlled foaming process, good dispersion, improved heat "> It... view more

LUVOBATCH® PE BA 5137 by Lehmann & Voss is an endothermal blowing agent. It offers good dispersion, short cycle times, streaking reduction, avoidance of post-inflation and decorative effects. It is a dust-free... view more

LUVOBATCH® PE BA 5139 by Lehmann & Voss is an endothermal blowing agent. It is suitable for polyethylene (PE), polypropylene (PP), ethylene vinyl acetate (EVA) and polystyrene (PS). It is a dust-free, low-cost... view more

LUVOBATCH® PE BA 5821 by Lehmann & Voss is an endothermal blowing agent. It offers shorter cycle times, streaking reduction, decorative effects, avoidance of post-inflation, safe dosage and good dispersion. It is a... view more