Hiflex CA 7600 A by LyondellBasell is a reactor soft thermoplastic polyolefin (TPO). Acts as an impact modifier. It is manufactured using the LyondellBasell Catalloy process technology. Exhibits good... view more

DeltaMax® f500 by Milliken offers improved impact properties while maintaining stiffness and increased melt flow to improve processing. It is an all-purpose modifier designed for use in injection... view more

PEearlene™ SiPC MB01 Silicone by Momentive is a masterbatch that provides improved processability (extrusion rate, mold fill and power consumption) and/or performance (izod impact resistance... view more

PEearlene™ SiPE MB02 Silicone by Momentive is a masterbatch that provides improved processability (extrusion rate, mold fill and power consumption) and/or performance (izod impact resistance... view more

OTTI EN106 by Otti Chem is a coupling agent for mineral filled or glass fiber filled nylon. It is maleic anhydride modified ethylene elastomer, especially suitable for reinforced or toughened nylon... view more

Hydrostrand® 258 chopped strand by Owens Corning is glass-fiber chopped strand. It is produced using Advantex® corrosion resistant glass. It improves impact resistance in impact modified grades, fatigue resistance and is... view more

CLARIFIER PP 7.5 M by Polytechs is a concentrate of 7.5% nucleating agent based in a polypropylene carrier. Acts as a clarifying agent. CLARIFIER PP 7.5 M increases transparency and surface brightness of PP films or... view more

Clarifying agent concentrate. Possesses improved clarity and better gloss. Offers improved tensile strength and better impact properties. Used for polypropylene injection molding applications... view more

Polylactic acid masterbatch. Acts as a plasticizer. Is designed to improve toughness, impact and processing of PLA sheet. Clarity is maintained and the product has FDA food contact approval. It was... view more

ROYALTUF® 485 impact modifier by SI Group is a semi-crystalline backbone which imparts good impact properties in polyamides at temperatures down to -30°C. This rubbery modifier provides improved... view more

ROYALTUF® 498 impact modifier by SI Group is a chemically modified EPDM. It is an amorphous backbone imparting highest impact properties in polyamides at temperatures down to -40°C. It provides... view more

OREVAC® IM300 by SK Functional Polymer is a maleic anhydride modified linear low-density polyethylene available in the form of pellets. Acts as an impact modifier. Offers softness, reactivity and... view more

OREVAC® IM800 by SK Functional Polymer is a maleic anhydride modified linear low-density polyethylene grade available in the form of pellets. Acts as an impact modifier. Offers softness, and good... view more

An effective multifunctional, biobased polymeric modifier and secondary plasticizer. It improves impact resistance, tear resistance, tensile toughness and plasticization, while not compromising... view more