Powerful primary and secondary accelerator that vulcanises rubber in absence of elemental sulphur. Effective at low and high temperatures. It is used in cables, IRP mouldings, extrusions and latex... view more

Useful secondary accelerator. More soluble in rubber than TMTD. Will act as a vulcanising agent but less active than TMTD. Synergises with SDBC to give fast low modulus systems for CR latex... view more

General purpose secondary accelerator that vulcanises rubber in the absence of elemental sulphur. It is also a retarder in CR vulcanisation and is widely used in tyre and IRP. Also available as... view more

Safe-processing secondary accelerator that can be used as a primary accelerator in latex. Presents high resistance to hydrolysis and low solubility in rubbers. Fast at higher vulcanisation... view more

Widely used as active secondary accelerator for dry rubber. Can also be used as a primary accelerator in latex. Prevulcanises latex and gives high modulus and transparency. High solubility in... view more

CBS(CZ) (Granular) by Rongcheng Chemical General Factory is a N-cyclohexyl-2-benzothiazole sulfenamide and acts as an accelerator. When vulcanized it shows excellent physical property. It is usually... view more

CBS(CZ) (Oil powder) by Rongcheng Chemical General Factory is a N-Cyclohexyl-2-benzothiazole sulfenamide which acts as an accelerator. It shows excellent physical property after vulcanization... view more

CBS(CZ) (Powder) by Rongcheng Chemical General Factory is a N-Cyclohexyl-2-benzothiazole sulfenamide and acts as an accelerator. When vulcanized it shows excellent physical property. CBS(CZ)... view more

DPTT(TRA) (Granular) by Rongcheng Chemical General Factory is odorless dipentamethylene thiuramtetrasulfide grade. It acts as a secondary accelerator. It is recommended for use in NR, SBR, EPDM and... view more

DPTT(TRA) (Oil powder) by Rongcheng Chemical General Factory is a dipentamethylene thiuramtetrasulfide grade. It is odorless and used as a secondary accelerator. DPTT(TRA) (Oil powder) is suitable... view more

ANOX® 70 stabilizer by SI Group is a highly effective sulfur containing phenolic antioxidant. It is recommended for PVC, LDPE copper wire insulation & cable jacketing, carbon black loaded... view more

BIK® OT curing agent by SI Group is used as an activator for blowing agents and accelerators. This surface treated urea is used as an activator for thiuram, thiazole & dithiocarbamate. Also used as an odor... view more

NAUGARD® Q stabilizer by SI Group is an antioxidant amine. It is an effective processing and long-term heat stabilizer for a variety of application areas in LDPE, LLDPE, HDPE and ethylene-propylene... view more

ROYALAC® 150 Powder curing agent by SI Group is a non-staining and non-discoloring tetraalkyl thiuram disulfide. It is used as a fast curing ultra-accelerator and sulfur donor in NR, SBR, BR, NBR and EPDM rubbers... view more

ROYALAC® 150 curing agent by SI Group is an ultra-accelerator and sulfur donor for unsaturated elastomers such as NR, SBR, EPDM and NBR. It can also be used in blends of SBR/NR. This additive is... view more