General purpose MBS core-shell impact modifier providing an excellent balance of impact resistance and modulus retention in a variety of engineering resins. Due to the core-shell structure and well... view more

MBS core-shell impact modifier. Is clear modifier in PMMA/SAN compounds. Offers very low haze in clear applications. Possesses high impact efficiency, good retention of part rigidity and excellent... view more

Acrylic polymer. Used as impact modifier for automotive under-the-hood applications, electric and electronic connectors, body panels for lawn mowers and tractors, and thermoset molding compounds... view more

Core-shell impact modifier. Offers good retention of part rigidity after ageing. Provides very good part surface finish and colorability. Improves the impact strength of glass filled compounds... view more

PARALOID™ EXL-3808 by Dow is maleic anhydride grafted (MAH) polyolefin. Acts as an impact modifier. It is a low crystallinity ethylene-octene copolymer functionalized with maleic anhydride (MAH) by... view more

Bluesil™ PRIM 131 by Elkem Silicones is an adhesion promoter. Used for room temperature vulcanizing silicone elastomers, polyamide, polycarbonate, ABS. Also used in one-component (RTV-1): CAF... view more

VESTAMIN® IPD eCO by Evonik is a low viscosity hardener based on cycloaliphatic diamine, with a faint amine odor. It shows low tendency to form carbamates, and humidity resistance.It exhibits excellent... view more

Exxelor™ PE 1040 by ExxonMobil Chemical act as a coupling agent in filled polyethylene compounds, or tie layer in multilayer PE systems to ensure compatibility as well as to improve adhesion of... view more

Exxelor™ VA 1801 by ExxonMobil Chemical is an impact modifier for polyamides for temperatures as low as -20°C, other engineering thermoplastics and technical polymers (with or without glass fibers... view more

Exxelor™ VA 1803 by ExxonMobil Chemical is an impact modifier for polyamides for temperatures as low as -40°C, other engineering thermoplastics and technical polymers (with or without glass fibers... view more

Exxelor™ VA 1840 by ExxonMobil Chemical is an impact modifier for polyamides for temperatures as low as -20°C and other engineering thermoplastics and technical polymers (with or without glass... view more

Ken-React® KPR® REZYK-1280 Powder supplied by FARRL is based on 78% of a monoalkoxy titanate ester compound with an aluminum co-catalyst on silicon dioxide as absorbing carrier. It acts as a co- and... view more

Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

Plasthall® BSA by Hallstar is a plasticizer which is N-butyl benzene sulfonamide. It is recommended for high polarity polymers including nylon... view more

Kemgard® HPSS by Huber Engineered Materials is a basic zinc molybdate/magnesium hydroxide complex. Acts as a flame retardant. It is highly efficient and economical, promotes char formation, compatible in both... view more

Kemgard® MZM by Huber Engineered Materials is a zinc molybdate/magnesium hydroxide complex. Acts as a flame retardant. It is highly efficient and economical, promotes char formation, compatible in both halogenated and... view more

Luzenac 20M00S by Imerys is a gray, lamellar talc. Luzenac 20M00S is a white, platy, fine-grind talc. It is recommended for PP automotive interior trim, where good surface appearance and high... view more

Luzenac A30 by Imerys is a very pure, very white, platy talc. With its medium fineness of grind, it is recommended for polypropylene applications. It offers coloration and excellent surface finish... view more