Ken-React® KPR® REZYK-1280 Powder supplied by FARRL is based on 78% of a monoalkoxy titanate ester compound with an aluminum co-catalyst on silicon dioxide as absorbing carrier. It acts as a co- and... view more

Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

PRETEX -7N by ILSHINWELLS is a glycerin fatty acid ester. It acts as an anti-static agent. It neutralizes static electricity and makes water leak. It can be processed by injection molding and sheet... view more

PRETEX -AS500 by ILSHINWELLS is an ethoxylated alkyl amine. It acts as an anti-static agent. It neutralizes static electricity and makes water leak. PRETEX -AS500 can be processed by injection... view more

LUVOBATCH® EA BA 5350 by Lehmann & Voss is an endothermal blowing agent. It offers avoidance of post-inflation, safe dosage, short cycle times, decorative effects and good dispersion. It is a dust-free, low-cost... view more

LUVOBATCH® EV BA 5335 by Lehmann & Voss is an exothermic blowing agent. It is a dust-free, low-cost masterbatch microgranulate form. It exhibits controlled foaming process, good dispersion, improved heat "> It... view more

LUVOBATCH® PE BA 5821 by Lehmann & Voss is an endothermal blowing agent. It offers shorter cycle times, streaking reduction, decorative effects, avoidance of post-inflation, safe dosage and good dispersion. It is a... view more

LUVOBATCH® PE BA 5823 by Lehmann & Voss is a dust-free, low-cost endothermal blowing agent. It exhibits controlled foaming process, improved heat "> It has higher dosing quantities compared to exothermic TMs. It... view more

LUVOBATCH® PE BA 7038 by Lehmann & Voss is an exothermic blowing agent. It exhibits controlled foaming process, improved heat "> It offers decorative effects, reduction of cycle time through reduction of melt... view more

POLYBATCH® COM DUL 3636 DP 20 by LyondellBasell is a matting agent masterbatch. It provides better matt surface, low pressure in front of the filter allowing higher output and no dust formation at... view more

POLYBATCH® COM DUL 3636 LT2 by LyondellBasell is a matting agent masterbatch. It provides matt surface and heat sealable properties, 115°C of seal initiation temperature can be achieved. It reduces... view more

POLYBATCH® DEG 34 by LyondellBasell is a masterbatch containing active ions embedded in LDPE. It degrades polyethylene under the influence of heat and light. It will not degrade before being exposed... view more

POLYBATCH® DEG 555 by LyondellBasell is a masterbatch. It contains additive mix which is both photo- and thermo degradable. The speed of degradation depends on the addition rate as well as on the... view more

POLYBATCH® FSU 105 E by LyondellBasell is a slip/antiblock masterbatch. It provides balanced surface properties. The amide slip agents are extremely pure and are combined with finely dispersed... view more