DPTU(CA) by Anyang General Chemical is a medium-speed vulcanization accelerator. It synergises with sulfur donor to boost vulcanization when used in NR and SBR. It acts as secondary accelerator in... view more

DPTU(CA) Oiled Powder by Anyang General Chemical is a medium-speed vulcanization accelerator. It synergises with sulfur donor to boost vulcanization when used in NR and SBR. It acts as secondary... view more

Ca-Zn and organic chemical compound. Acts as heat stabilizer. Improves the impact resistance of profiles, welding strength of the door and window, improving the outdoor aging property of door as... view more

Ca-Zn and organic chemical compound. Acts as a heat stabilizer. Offers good color staining, good heat stability at later period, good plasticization fluidity, low production electricity, saving... view more

Zinc Oxide RAC by Brüggemann is an active zinc oxide, which is produced by a special precipitation process. Due to gentle thermal treatment and its chemical origin, it provides excellent... view more

Preparation of zincdialkyldithiophosphate and amine,70 % adsorbed on silica. Used as vulcanization accelerator for rapid cure of EPDM and diene rubber. Provides low compression set as well as very... view more

Synergistic combination of thiazole-, dithiophosphate- and basic accelerators... view more

Synergistic combination of thiazole-, dithiophosphate- and alcaline accelerators... view more

4,4'-Dithiodimorpholine (DTDM). Used as vulcanizing agent. Offers good heat resistance and low compression set... view more

Duslin® P by Duslo is a N-(cyclohexylthio)-phthalimide (CTP). Acts as a highly efficient inhibitor for vulcanization of caoutchouc mixtures, mainly on the basis of diene caoutchouc, vulcanized by... view more

N-(cyclohexylthio)-phthalimide (CTP). Used as pre-vulcanization inhibitor of rubbers... view more

Duralink™ HTS by Eastman is an adhesion promoter. It is used in sulfur-based vulcanization systems to generate hybrid cross-links. It further provides increased retention of physical and dynamic... view more

Coupsil® 6109 by Evonik acts as a reinforcer/ filler in rubber compounds. It is precipitated silica surface-modified with organosilane. It imparts greater tensile strength, higher moduli and reduced... view more

Coupsil® 8113 by Evonik is a reinforcing filler based on precipitated silica, surface modified with organosilane Si 69®. It reacts with unsaturated polymer during vulcanization under formation of... view more

Coupsil® VP 6411 by Evonik acts as a reinforcing filler in rubber compounds. It imparts greater tensile strength, higher moduli, optimized dynamic properties, lower compression set values and better... view more

Coupsil® VP 6508 by Evonik acts as a reinforcing filler. Designed for peroxide-cured rubber compounds where optimum technical properties are required. Imparts greater tensile strength, higher modulus... view more

ULTRASIL® 360 by Evonik is precipitated silica. It is used as reinforcer filler in the rubber industry. It offers very good processability. It imparts a low compression set. It exhibits very good... view more

BactiBlock® 920 B0 supplied by FARRL is an antimicrobial additive suitable to be used in compounding of a broad variety of polymeric products like polyolefins or others to be used in food contact... view more

BactiBlock® 920 B4 supplied by FARRL is an antimicrobial additive suitable to be used in a broad variety of polymeric products like thermosets, thermoplastics, elastomers and rubber. The product is... view more

Kenflex® A POWDER 95/5 supplied by FARRL is chemically a dimethyl naphthaline tetramer supplied as a dry-liquid powder with 95% active material absorbed by silica. It acts as a plasticizer in high... view more