Trigonox® 36-W50 by Nouryon is an initiator for the suspension polymerization of vinyl chloride in the temperature range between 50°C and 70°C. It is water-based peroxide emulsion. Trigonox® 36-W50... view more

Trigonox® 423-C70 by Nouryon is an initiator (70% active ingredient in odorless mineral spirits) for (co)polymerization of vinyl chloride and vinylidine chloride. It can be applied for the LDPE... view more

Trigonox® 423-W50 by Nouryon is an initiator (50% water-based emulsion) for (co)polymerization of vinylidine chloride. It is used for the suspension polymerization of vinyl chloride in the... view more

Trigonox® 425-C75 by Nouryon is an initiator (75% active ingredient in odorless mineral spirits) for (co)polymerization of LDPE, vinyl chloride, vinylidine chloride acrylates and methacrylates. It... view more

Trigonox® 99-C75 by Nouryon is an initiator (75% active ingredient in odorless mineral spirits) for (co)polymerization of LDPE and vinylidine chloride. It is used both for tubular and autoclave... view more

Acrylic Processing Aids TP-401 by Novista is a general pvc processing aid based on emulsion polymerization technology. It can be used in rigid pvc formulations to improve melt flowing, pvc gelation ability and... view more

bFI A 3745 by Polytives is a polymeric processing aid. It is a flow improver developed to reduce the melt viscosity of various polymers including PMMA and polymer systems thereby increasing the... view more

bFI A 3745_P by Polytives is a polymeric processing aid in powder form. It is a flow improver dveloped to reduce the melt viscosity of various polymers (PMMA) and polymer systems thereby increasing... view more

LOWINOX® TBM-6 stabilizer by SI Group is a non-coloring, non-staining, thiophenol antioxidant. It is used in HDPE and LDPE for tubes, water & gas pipes, connectors, high voltage cables and... view more