Omyaloop 1T FC-AV by Omya is made of 100% pre-consumer recycled natural calcium carbonate that would have otherwise been disposed of as waste. It is surface-treated and therefore has a low moisture... view more

Omyaloop 1 FC-AV by Omya is made of 100% pre-consumer recycled natural calcium carbonate that would have otherwise been disposed of as waste. It increases the proportion of recycled content and... view more

Omyaloop 2 FC-AV by Omya is made of 100% pre-consumer recycled natural calcium carbonate that would have otherwise been disposed of as waste. It increases the proportion of recycled content and... view more

Omyaloop 2T FC-AV by Omya is made of 100% pre-consumer recycled natural calcium carbonate that would have otherwise been disposed of as waste. It is surface-treated and therefore has a low moisture... view more

Omyaloop 5 FC-AV by Omya is made of 100% pre-consumer recycled natural calcium carbonate that would have otherwise been disposed of as waste. It increases the proportion of recycled content and... view more

PALMESTER 3976 by KLK OLEO is pentaerythritol tetrastearate derived from renewable vegetable oils. It exhibits excellent lubricating properties internally and/or externally in PC and most... view more

PALMOWAX Ethylene Bis Stearamide (EBS) by KLK OLEO is derived from renewable vegetable oils. It exhibits excellent lubricating properties internally and/or externally in most plastics such as ABS... view more

PALMOWAX SPO by KLK OLEO is ethylene bis-oleoamide derived from renewable vegetable oils. It exhibits excellent lubricating properties internally and/or externally in EVA and engineering plastics... view more

PALMOWAX SR by KLK OLEO is ethylene bis-stearamide (EBS) derived from renewable vegetable oils. It enhances softening point, increases flow and adhesion in bitumen & asphalt. It functions as slip &... view more

Multi-purpose, heavy duty, silicone mould release agent. Based on silicones dissolved in a blend of solvents and used in formulation for injection moulding. Also used in a wide range of other... view more

Formula Six by Ambersil is a multi-purpose, highly effective, general purpose, silicone mold release agent. It provides a medium duty film for release of plastic and rubber parts in injection &... view more

It is a concentrated, affordable, zero-odor and environment-friendly additive. Exhibits highest temperature stability as compared to other concentrated additives. Capable of inherent... view more

It is a concentrated, affordable, zero-odor and environment-friendly additive. Exhibits highest temperature stability as compared to other concentrated additives. Capable of inherent... view more

Bio based, light weight, inexpensive filler. It is made entirely from plant matter, using environmentally friendly methods. NeroPlast® does not absorb and swell with water, even when in cased in... view more

Medium active methyl ethyl ketone peroxide. Used as polymerization initiator for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and... view more

Andonox KP-9 by United Initiators is methyl ethyl ketone peroxide. Acts as general purpose polymerization initiator with remarkable purity. It is phlegmatiser for the curing of unsaturated polyester... view more

Andonox KP-9S by United Initiators is methyl ethyl ketone peroxide. Used as polymerization initiator for hand lay-up, spray-up, RTM continuous laminating, centrifugal casting, filament winding, polyester... view more