Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® 138S supplied by FARRL is a titanate product based on titanium IV, class oxyacetate chelate, with pyrophosphate functionality. It has low viscosity and solid content of min. 99%. It... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

Dinitroso pentamethylene tetramine. Has large quantities of gas volume and decomposition temperature. Is easy of regulating, good compatibility of rubber, low-cost, high-brightness products. Widely... view more

Azodicarbonamide. Acts as a blowing agent. Produces odorless, non-staining, low density foam of extremely fine and uniform cell structure. Used in the production of cellular leather cloth, floor... view more

Dinitroso pentamethylene tetramine. Acts as a blowing agent. Is non-discoloring and non-staining. Used for rubbers which are natural rubber, styrene butadiene, hi-styrene, neoprene and butyl rubber... view more

CAP/132 by Kumyang acts as a blowing agent. It offers reduced cost and possesses light weight & insulation. It has small & uniform cell structure with a smooth surface (no pin holes) and can... view more

EMA80AH by Kumyang acts as a blowing agent. It has high gas yield and fast decomposition rate. It is compatible with natural rubber (NR) & styrene-butadiene rubber (SBR) and suitable for... view more

H (Kumyang) by Kumyang acts as a blowing agent. It has low temperature process and fast curing properties. It is compatible with natural rubber (NR) & styrene-butadiene rubber (SBR) and suitable... view more

KY-ECO2 by Kumyang acts as an endothermic blowing agent. It reduces carbon emission and energy saving during processing. It exhibits very low gas yield and expansion ratio. It is compatible... view more

Trilene® Freeflow™ 65 by Lion Elastomers is a blend of low molecular weight 68% ethylene-propylene-dicyclopentadiene polymer and 32% silica. Acts as a processing aid. Helps in achieving higher... view more

Trilene® Freeflow™ 67 by Lion Elastomers is a blend of low molecular weight ethylene-propylene ethylidene norbornene rubber (68%) and (32%) silica. Acts as a processing aid. Helps in achieving higher output... view more

Trilene® Freeflow™ CP1100 by Lion Elastomers is a blend of low molecular weight ethylene-propylene liquid polymer (68%) and silicon dioxide (32%). Acts as a processing aid. Helps in achieving higher output, decreasing... view more

Trilene® Freeflow™ CP80 by Lion Elastomers is a blend of low molecular weight ethylene-propylene liquid polymer (68%) and silicon dioxide (32%). Acts as a processing aid. Helps in achieving higher output, decreasing... view more

Blend of low molecular weight ethylene-propylene ethylidene norbornene rubber (68%) and silicon dioxide (32%). Acts as a processing aid. Helps in achieving higher output, decreasing down time and... view more

heat cured semi-permanent release coating for compression molding EPDM, nitrile, neoprene and natural rubber elastomers. Available in aerosol and bulk, and waterbase or solvent carriers... view more

Fusible, dry film release coating suitable as a semipermanent release surface for silicone and natural rubber. Provides the following benefits : multiple release cycles, no transfer to molded parts... view more

McLube® 1725L by McLube is a release agent and general-purpose dry film lubricant. Exhibits low friction and very good anti-stick characteristics. Furnishes a release coating for all types of rubber... view more