Innovoh® distributed by DKSH is used as cure additive and acid scavenger in bisphenol cured FKM fluoroelastomers. It contains 100% calcium hydroxide powder. It is not used in peroxide cured... view more

DYHARD® 100 by AlzChem is a latent hardener & dicyandiamide-based curing agent for thermosetting epoxy resin systems used in composite industry. It offers extraordinary long latency and cost... view more

DYHARD® 100S by AlzChem is a latent hardener & dicyandiamide-based curing agent for thermosetting epoxy resin systems used in the composite and electrical industry. It possesses low shrinkage &... view more

DYHARD® 100SF by AlzChem is a latent hardener & dicyandiamide-based curing agent for thermosetting epoxy resin systems used in the composite industry. It offers extraordinary long latency and cost... view more

DYHARD® 100SH by AlzChem is a latent hardener & dicyandiamide-based curing agent for thermosetting epoxy resin systems used in the composite and electrical industry. It possesses low shrinkage &... view more

DYHARD® D50EP by AlzChem is a latent hardener & masterbatch of curing agents or accelerators for thermosetting epoxy resin systems used in the composite industry. It is excellently pre-dispersed... view more

Luperox® 101PP20 by Arkema is 2,5 dimethyl 2,5 di(tert-butylperoxyl) hexane. It acts as a viscosity modifier, polymerization initiators, crosslinking agent and vulcanizing agent. It offers easy... view more

Luperox® 101PP7.5 by Arkema is 2,5 Dimethyl 2,5 Di(tert-butylperoxyl) hexane. It acts as a viscosity modifier, polymerization initiators, crosslinking agent and vulcanizing agent. It offers easy... view more

Luperox® 231 by Arkema is 1,1-di(t-butylperoxy)-3,3,5-trimethylcyclohexane. Acts as a crosslinking agent. It is a colorless liquid (92%) and is available in several concentrations from 50% to 90%... view more

Luperox® 231XL40 by Arkema is 1,1-di(t-butylperoxy)-3,3,5-trimethylcyclohexane crosslinking peroxide. It acts as a polymerization initiator, crosslinking and vulcanizing agent. It is a 40% active... view more

Luperox® CU80 by Arkema is 80% cumene hydroperoxide. It acts as a polymerization initiator and crosslinking agent. It offers slow gelling and low exotherm properties. It is compatible with polyester... view more

Lonzacure® DETDA 80 by Arxada is a high-quality diethyl toluene diamine (DETDA). Acts as a chain extender and curing agent/hardener. Provides beneficial thermo-mechanical, chemical and abrasion... view more

Lonzacure® L-15 by Arxada is a high-quality diamine. Acts as a chain extender and curing agent/hardener. Provides beneficial thermo-mechanical, chemical and abrasion resistance at a low level of... view more