Technicure® 54 by A&C Catalysts is a 2,4,6-tris(dimethylaminomethyl) phenol. Acts as a cure accelerator. Suitable for polyamides, amido amines, anhydrides and polycarboxylic acids. It has low viscosity and... view more

Akroform® HMT-80/EPR/P by Akrochem is 80% polymeric dispersion of hexamethylenetetramine (HMT) in EPR. It is a masterbatch and used with resorcinol (with silica) to make rubber-to-fabric adhesion possible. It... view more

Akroform® HMT-80/SBR/P by Akrochem is 80% polymeric dispersion of hexamethylenetetramine in SBR. It is a masterbatch and used with resorcinol (with silica) to make rubber-to-fabric adhesion... view more

1,3-Phenylene-bis-oxazoline by Evonik acts as a crosslinker, modifier and stabilizer. It also functions as a chain extender. It is compatible with polyamide, polyester, co-polyester, both saturated & unsaturated... view more

Ancamide® 2443 by Evonik is a low viscosity, plasticizer-free epoxy curing agent and modifier by Evonik. It enables the development of high-performance formulations that can be applied via... view more

Aminoethylenepiperazine (AEP-HP) by Huntsman is a high purity, curing agent for epoxy resins. It also functions as a corrosion inhibitor and mineral processing aid. It is compatible with polyamides... view more

Diethylenetriamine (DETA) by Huntsman is a curing agent for epoxy resins. It also functions as a corrosion inhibitor, surfactant, mineral processing aid and chelating agent. It is a clear... view more

Tetraethylenepentamine (TEPA) by Huntsman is a curing agent for epoxy resins. It also functions as a corrosion inhibitor, surfactant and mineral processing aid. It can be used in composites. It is... view more

Triethylenetetramine (TETA) by Huntsman is triethylenetetramine acts as a curing agent for epoxy resins. It also functions as a corrosion inhibitor, surfactant and mineral processing aid. It is... view more

Nylok® 171 by KaMin is an amino-functional anhydrous aluminum silicate. It is a calcined clay that acts as a functional filler and reinforcing agent. It is used to speed dispersion and increase... view more

Trixene Aqua BI 202 by Lanxess is a MEKO-free, high temperature unblocking crosslinker developed by fiber sizing technologies. Offers improved strand integrity and reduced fuzz formation. Imparts... view more

NEXAMITE® A32 by Nexam Chemical acts as an end-capper/crosslinker for high temperature applications. It has little or no negative effect on processability during compounding and injection molding. It can be... view more

NEXAMITE® A33 by Nexam Chemical acts as a crosslinker for high temperature applications. It provides increased long term heat stability (>180°C), reduced moisture uptake and increased tensile strength &... view more

NEXAMITE® A56 by Nexam Chemical acts as long-chain branching and crosslinking agent. It shows positive effect on the mechanical properties, such as flexural strength & modulus and increased elongation at... view more

NEXAMITE® A93 by Nexam Chemical acts as long-chain branching and crosslinking agent. It is used to avoid unwanted effects such as parison sag, but exhibits positive effect on the mechanical properties such... view more

NEXIMID® 100 by Nexam Chemical is a 4-Phenylethynylphthalic anhydride powder in light yellow color. Acts as a crosslinker. Compatible with high performance polymers including polyimides... view more

Zinc acetate. Acts as a catalyst. Used in the production of polyesters, polyamides, polyether and vinyl acetate as well as in the manufacture of phenolic foam for thermal insulation, and alkyds... view more

Perkadox® SE-10 by Nouryon is an initiator for (co)polymerization of vinylidene chloride, styrene, acrylonitrile, vinylacetate acrylates and methacrylates. It is used for the high-pressure... view more