DYHARD® Fluid 111 by AlzChem is a liquid latent hardener & curing agent for thermosetting epoxy resins systems used in the composite industry, especially for vacuum infusion-, RTM-, pultrusion... view more

DYHARD® Fluid 151 by AlzChem is a formulated liquid hardener for resin transfer molding (RTM) in combination with DYHARD® RF1100 (formulated resin) & DYHARD® Fluid AC11 (formulated liquid... view more

DYHARD® Fluid 212 by AlzChem is a latent liquid hardener & curing agent for filament winding in combination with DYHARD® RF2100 (formulated resin). It is a formulation of epoxy resin and curing... view more

Luperox® 11M45 by Arkema is tert-butyl peroxypivalate-based polymer initiator. It is a lower active concentration formulation. The higher proportion of odorless mineral spirits allows a... view more

Luperox® 231 by Arkema is 1,1-di(t-butylperoxy)-3,3,5-trimethylcyclohexane. Acts as a crosslinking agent. It is a colorless liquid (92%) and is available in several concentrations from 50% to 90%... view more

CUREZOL® 1B2MZ by Evonik is imidazole curing agent for epoxy resins. It is a low viscosity accelerator. Designed for potting and encapsulation in electrical and electronic applications. CUREZOL®... view more

CUREZOL® 2E4MZ by Evonik is an accelerator in the reaction between epoxy resins and other curing agents. Offers single package latency from several hours to greater than six months. Possesses rapid... view more

Dabco® BA150 by Evonik is a non-emissive, hydrolytically stable blocking agent. It is used to delay the catalyst reaction and to improve flow while maintaining back end cure. Its components are all... view more

Dabco® TMR-12 by Evonik is a trimerization catalyst. Provides formulators with the necessary tools for tailoring isocyanurate foam reactivity to meet processing needs. Possesses easy processing and... view more

Dabco® TMR-25 by Evonik is a trimerization catalyst. Possesses a smooth rise profile. Suitable for formic acid blown systems. Dabco® TMR-25 catalyst is used to produce polyisocyanurate foam in the... view more

Accelerator CTAS by Nouryon is a proprietary organosulfur compound. It is to be used in combination with Perkadox® PF-MT40Z for the production of acrylic solid surface. It is used to catalyze and modify... view more

Butanox® LPT-IN by Nouryon is methyl ethyl ketone peroxide for curing unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures. It is suitable for those... view more

Butanox® LPT-IN VRN by Nouryon is a general purpose, methyl ethyl ketone peroxide for curing unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures... view more

Butanox® M-50 by Nouryon is a medium-reactive, general purpose MEKP with low water content for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated... view more

Butanox® M-50 VR by Nouryon is a general-purpose, methyl ethyl ketone peroxide for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated... view more