Dabco® BL-13 by Evonik is a catalyst based on (2-dimethylamino ethyl) ether. Used in flexible foams. Dabco® BL-13 is designed for extrusion blow molding... view more

Dabco® BLV by Evonik is a blend of blowing and gelling amine catalyst. Used in flexible slabstock foams and extrusion blow molding applications. Dabco® BLV offers superb catalytic activity... view more

Dabco® DC2525 by Evonik acts as a silicone stabilizer and emulsifier. Used in cold cure flexible molded MDI and MDI/TDI polyurethane systems. Dabco® DC2525 is suitable for processing by extrusion... view more

Dabco® DC2584 by Evonik is a high efficiency surfactant and foaming agent. Designed for flexible molded foam applications, MDI and MDI/TDI cold cure systems. It has a low fogging potential... view more

Dabco® DC5164 by Evonik is a high-efficiency silicone surfactant. Used for cold cure flexible molded polyurethane foam systems. Suitable for extrusion blow molding applications. Offers very good... view more

Dabco® DC5258 by Evonik acts as an emulsifier based on silicone glycol. Used in a variety of cold cure flexible molded and semi-flexible polyurethane foam systems. Suitable for thermoplastic... view more

Dabco® DC5598 by Evonik is a non-hydrolyzable emulsifier. Used in rigid polyurethane & polyisocyanurate foam and extrusion blow molding applications. Offers good compatibility with common rigid foam... view more

Organomodified siloxane (OMS). Used as a processing aid for extrusion, injection- and blow molding, a surface modifier for thermoplastics and elastomeric polymers... view more

Dabco® DC5384 by Evonik is silicone-based emulsifier. It is used in molded rigid foams. Offers improved flow by reducing friction at the mold/polymer interface. Dabco® DC5384 enhances cell opening... view more

Dabco® DMEA by Evonik is dimethylethanolamine. Used in polyether flexible slabstock foams, MDI high resiliency flexible molded foams, rigid bunstock and energy absorbing non-recoverable rigid... view more

Dabco® H-1010 by Evonik is a low-corrosivity, controlled-activity (delayed) catalyst. Dabco® H-1010 is used in flexible molded polyurethane foams. It is recommended for blow molding... view more

Dabco® WT by Evonik is a delayed-action amine catalyst. It is recommended for extrusion blow molding. It is recommended for use in all types of polyurethane foam... view more

Polycat® 43 by Evonik is trimerization catalyst. It is used in polyisocyanurate and polyurethane modified polyisocyanurate foam. Polycat® 43 provides processing efficiency and improved physical... view more