Transparent and water-soluble product, especially used as mandrel release agent to treat mandrel for the vulcanization of tubes in autoclaves. Due to its incompatibility with rubbers, minimized... view more

Antitack BTO-31 LF by Kettlitz Chemie is an antitack agent. Due to its additives (detergents, anti rust and anti foam agents) can be used in batch-off-systems. It does not contain any heavy metal... view more

Pure zinc stearate dispersion. Used to antitack to prevent the sticking together of green compound batches, endless strips, granules or blanks. Does not influence the moulding properties nor the... view more

Highly concentrated dispersion of zinc stearates. Mainly used in the rubber industry to prevent surface sticking of uncured rubber compounds. Especially used for the treatment of rubber sheets and... view more

Water-in-oil-emulsion of higher alcohols, aliphatic fatty acids and high boiling hydrocarbons. Used in all rubber compounds. Possesses good compatibility. Exhibits non-staining properties... view more

Deovulc TP 4-75 by King Industries is a zinc dialkyldithiophosphate on a silica carrier. Acts as an accelerator based on zinc dialkyldithiophosphate absorbed on a silica carrier. It is most effective for... view more

Dispergum K by King Industries is a zinc salt of defined saturated and unsaturated fatty acids, dispersed on inorganic filler. Acts as a processing aid based on zinc soap used in various elastomers as a... view more

Dispergum PT by King Industries is a zinc salt of defined saturated and unsaturated fatty acids. Acts as a processing aid used in various elastomers as a lubricant and to reduce compound viscosity. Improves... view more

Modified fatty oils, crosslinked with sulfur (free of mineral oil). Is a vulcanized vegetable oil based on modified fatty oils designed for general purpose rubbers. Increases the dimensional... view more

Modified fatty oils, crosslinked with sulfur (with 15% mineral oil). Is a vulcanized vegetable oil based on modified fatty oils designed for general purpose rubbers. Increases the dimensional... view more

CELLCOM AC7000FK by Kumyang acts as a chemical blowing agent. It possesses low toxicity, high decomposition temperature and high expansion ratio. It is self-extinguishing when flame is removed. The... view more

EPOB/75 by Kumyang acts as a blowing agent. It exhibits excellent dispersion and is compatible with ethylene propylene diene rubber (EPDM). It is suitable for extrusion processing method... view more

Adimoll® BO is benzyl octyl adipate. Acts as a plasticizer. It is characterized by low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial... view more

Mesamoll® by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Mesamoll® II by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Stabaxol® 1 LF by Lanxess is a monomeric carbodiimide. Acts as an anti-hydrolysis agent. It has distinctly reduced content of volatile components for polyester polymers (PET, PBT, TPE), polyamide... view more

Ultramoll® IV by Lanxess is adipic acid polyester. Acts as a polymeric plasticizer. It offers good extraction resistance to oils, migration resistance in contact with other plastics, thermostability... view more