Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® 138S supplied by FARRL is a titanate product based on titanium IV, class oxyacetate chelate, with pyrophosphate functionality. It has low viscosity and solid content of min. 99%. It... view more

Ken-React® KR® 55 supplied by FARRL is a titanate product based on titanium IV, class coordinate, with phosphito functionality. It has low viscosity and solid content of min. 98%. It helps in... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

Actafoam® AZ-760-A by Galata Chemicals (Artek) is a non-plate out modified azodicarbonamide. It is used for applications such as foamed wire and cable insulation. It reduces loss of foaming agent efficiency. Actafoam® AZ-760-A is... view more

GRAFTALEN™ MB-HMSPP 01200 by Graft Polymer is a high melt strength long chain branched polypropylene masterbatch. It offers good melt stability at lower shear stress. It is suitable for foaming... view more

HECO® FOAM 900 C by HECOPLAST is a 100% endothermic system of the very fine components without carrying agent. Acts as a blowing agent. It has a starting temperature of about 150 °C. The optimum gas... view more

HECO® FOAM 940 PE by HECOPLAST is a 40% endothermic system on a PE carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

HECO® FOAM 940 S by HECOPLAST is a 40% endothermic system on a PS carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

HECO® FOAM 970 PO by HECOPLAST is a 70% endothermic system on a PE carrier. Acts as a blowing and nucleating agent. It has a starting temperature of about 150°C. The optimum gas yield will be... view more

Kane Ace™ PA121 by Kaneka is acrylic copolymer. Acts as a processing aid. It is of lubricant type and reduces PVC metal sticking. It has low molecular weight and possesses improved plate out... view more

Black masterbatch 30% Carbon black by Laicai Plastic Masterbatch Factory is a pigment carbon type of carbon black (30%) with LLDPE as carrier. It shows an excellent blackness, very good dispersion, ultraviolet resistant for outdoor applications... view more

Black masterbatch 50% Carbon black by Laicai Plastic Masterbatch Factory is a pigment carbon type of carbon black (50%) with LLDPE as carrier. It shows an excellent blackness, better dispersion, ultraviolet resistant for outdoor applications... view more

Blue masterbatch with PE as carrier. It shows high coloring, good dispersion, brightness with high concentration, strong resistance to heat and is environment friendly. It has a better hiding power... view more

Green masterbatch with PE as carrier. It shows high coloring, good dispersion, brightness with high concentration, strong resistance to heat and is environment friendly. It has a better hiding... view more

Red masterbatch with PE as carrier. It shows high coloring, good dispersion, brightness with high concentration, strong resistance to heat and is environment friendly. It has a better hiding power... view more

Mixture. Acts as a blowing agent. It is a dust-free, low-cost masterbatch in granulate/ micro-granulate form comprising both endothermal and exothermal blowing agents. Releases non-toxic gases by... view more

Carbonate-based compound. Acts as a blowing agent. It is a dust-free, low-cost masterbatch. Releases non-toxic gases (carbon dioxide & water vapor) by means of thermally activated decomposition... view more

Carbonate-based compound. Acts as an endothermal blowing agent. It is a dust-free, low-cost masterbatch. Releases non-toxic gases (carbon dioxide & water vapor) by means of thermally activated... view more