For the pultrusion industry. Increases melt flow index/reduces resin viscosity. Faster cycles. Easy mold release. Improves dispersion of color and filler. Easy cavity fill. Better wetting of... view more

For the pultrusion industry. Increases melt flow index/reduces resin viscosity. Faster cycles. Easy mold release. Improves dispersion of color and filler. Easy cavity fill. Better wetting of... view more

For the pultrusion industry. Increases melt flow index/reduces resin viscosity. Faster cycles. Easy mold release. Improves dispersion of color and filler. Easy cavity fill. Better wetting of... view more

Increases melt flow index/reduces resin viscosity. Faster cycles. Easy mold release. Improves dispersion of color and filler. Easy cavity fill. Better wetting of reinforcements. Eliminates stress... view more

For the pultrusion industry. Increases melt flow index/reduces resin viscosity. Faster cycles. Easy mold release. Improves dispersion of color and filler. Easy cavity fill. Better wetting of... view more

Organomodified siloxane (OMS). Used as a processing aid for extrusion, injection- and blow molding, a surface modifier for thermoplastics and elastomeric polymers... view more

KESAPLAST 8100 supplied by FARRL is an adipate (DEHA/DOA) used as plasticizer in PVC, plastisols, ethyl cellulose, polystyrene and rubber. It offers excellent cold elasticity, good electrical... view more

KESAPLAST 8400 supplied by FARRL is an epoxidized soya fatty acid ester which is a green alternative to DINP, DOTP and polymeric plasticizers. Offers good low temperature resistance from above 5°C... view more

KESAPLAST 8500 supplied by FARRL is dioctyl terephthalate (DOTP) used as a high molecular weight (monomeric) plasticizer. It offers an excellent plasticizing effect, excellent processing performance... view more

KESAPLAST 8810 ST supplied by FARRL is a stabilized C8/C10 trimellitate which acts as a plasticizer. It is a mixture of C8/C10 alcohols with a relatively higher molecular weight monomeric ester. It... view more

KESAPLAST 8812 supplied by FARRL is a non-stabilized tris(2-ethylhexyl) trimellitate (TOTM) and acts as a plasticizer. This relatively high molecular weight monomeric ester offers excellent... view more

Adimoll® BO is benzyl octyl adipate. Acts as a plasticizer. It is characterized by low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial... view more

Mesamoll® by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more

Mesamoll® II by LANXESS is phthalate-free, general-purpose plasticizer with a significantly reduced product carbon footprint (PCF). It has good gelling behavior and exceptional saponification... view more