PowerNox™ 4150 by TinToll (PCC Group) is a primary and thio’s secondary antioxidant for organic polymers. It is a 4, 4'-thiobis (6-tert-butyl-m-cresol) available in white to off-white colored powder... view more

PowerNox™ 565 by TinToll (PCC Group) is a non-staining multifunctional hindered phenol-based antioxidant. It offers highly effective stabilization at low concentration. It is available in white or... view more

PowerSorb™ 1577 by TinToll (PCC Group) is a low volatility, ultraviolet light absorber. It is a 2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-[(hexyl)oxy]-phenol. It allows polycarbonate and polyesters to... view more

PowerSorb™ 531 by TinToll (PCC Group) is a 2-hydroxy-4-n-octoxybenzophenone-based ultraviolet light absorber. It exhibits synergy with HALS and is available in slightly yellow powder or flake form... view more

PowerStab™ 770 by TinToll (PCC Group) is a bis(2,2,6,6,-tetramethyl-4-piperidyl)sebaceate. It is a low molecular weight hindered amine light stabilizer (HALS). It provides excellent light stability... view more

HARDLEN® CY-1321P by Toyobo is an adhesion promoter for polyolefin. It is focused on the solution stability which chlorinated polyolefin with maleic anhydride groups is dissolved in. The main... view more

HARDLEN® CY-9122P by Toyobo is an adhesion promoter for polyolefin. It shows good adhesion to polypropylene, TPO, EPDM, PP/EPDM and metal substrates without some physical and chemical pre-treatments... view more

HARDLEN® CY-9124P by Toyobo is an adhesion promoter for polyolefin. This additive displays good adhesion to polypropylene, TPO, PP/EPDM, EPDM and metal substrates without some physical and chemical... view more

HARDLEN® F-2P by Toyobo is an adhesion promoter for polyolefin. This additive displays good adhesion to PP, TPO (thermoplastic olefin elastomer), PP/EPDM, EPDM and metal substrates without some... view more

HARDLEN® F-6P by Toyobo is an adhesion promoter for polyolefin. This additive possesses excellent resistance against water, gasoline and gasohol after top-coating. It shows good adhesion to PP, TPO... view more

BioMotion™ X10 by UPM is a bio-based and semi-reinforcing functional filler with more than 94% renewable carbon. It can replace fossil-base highly carbondioxide intensive carbon-black and... view more

BioMotion™ X20 by UPM is a bio-based, semi-reinforcing functional filler with more than 94% renewable carbon. It offers 90% lower carbon footprint compared to standard furnace carbon black. It is... view more

BioMotion™ X40 by UPM is a bio-based, semi-reinforcing functional filler with more than 94% renewable carbon. It is 100% electric insulating and prevents electrochemical corrosion. It is 25% lighter... view more

Zinc di-n-butyl dithiocarbamate. Used as nondiscoloring and nonstaining ultra accelerator. Used in ethylene propylene diene rubber... view more

DCUP by United Initiators acts as an initiator (radical source) in the polymerization of monomers, eg. styrene and as a synergetic co-agent for flame retardants in expandable polystyrene (EPS). It... view more

Solution of 1,1-di(tert-butylperoxy)-3,3,5-trimethyl cyclohexane with a minimum assay of 90%. It acts as a crosslinking and curing agent. Also acts as a initiator for the polymerization. It is used... view more

Di(tert.butylperoxy)-3,3,5-trimethylcyclohexane. It acts as an initiator (radical source) for the high pressure polymerization of monomers (e.g. styrene) as well as in the curing of unsaturated... view more