Andisil EM by AB Specialty Silicones silicone emulsions are non-flammable, non-toxic, non-ionic emulsions of various viscosity polydimethylsiloxane fluids. Act as excellent release aid of rubber and plastics... view more

ADK STAB LX-45 by ADEKA is an epoxy type stabilizer. Provides excellent heat or light stability. Exhibits good dispersibility in latexes. ADK STAB LX-45 is suitable for ABS and synthetic rubber latexes... view more

Ambersil emulsion 3002 by CHT Group is a non-ionic aqueous emulsion of a silicone polymer. It is a water repellent and release agent for industrial glassware and for tissue paper to allow good... view more

Ambersil emulsion 3004 by CHT Group is a very stable oil-in-water non-ionic emulsion of a low-to-medium viscosity linear polydimethylsiloxane. It is used in mold release of plastics and rubbers... view more

Water-based, semi-permanent release agent for rubber molding. Fast curing .                                 No contaminating transfer . Non flammable ... view more

Excellent release and slip properties and is recommended for the most demanding molding applications, especially for highly abrasive compounds.   Fast curing... view more

Offers unparalleled release and slip properties and is recommended for the most difficult rubber molding applications.   Fat curing.   Excellent slip... view more

Water dilutable concentrate that provides a durable release film for most rubber molding applications. Fast curing.                                                 No chlorinated or aromatic... view more

TEGO® Antifoam 2-57 by Evonik is an anti-foaming agent. It is an organo-modified siloxane emulsion. It shows no negative effects in downstream applications (no surface defects, fish eyes). It offers... view more

TEGO® Antifoam 2290 by Evonik is an anti-foaming agent and processing aid. It is a self-emulsifying, silicone- and APEO-free organic concentrate. It destroys foam or prevents foam formation. It... view more

PE-40 by Harwick Standard is a 30% solid water non-ionic emulsion of polyethylene. It acts as a release agent for molding of rubber compounds including silicone and fluroelastomers. It is effective... view more

Nychem® Poly4000 latex by Huntsman is a specialized waterborne, polybutadiene homopolymer. Acts as an impact modifier. It is the softest polymer and modifies the impact resistance of more brittle... view more

Is a milk white emulsion of liquid stabilizers in water with some presence (5% approx.) of toluene. Is very stable and easy to add to elastomers/resins dispersion or emulsion. This emulsion grants... view more

BC 330 EPHV by KCC Basildon (Momentive) is a high viscosity, silicone for more difficult release problems. It is an anionic emulsion of very high viscosity polydimethylsiloxane. BC 330 EPHV is used... view more

BC 330 LV by KCC Basildon (Momentive) is an excellent mold release agent. It is an emulsion of medium viscosity polydimethylsiloxane. This additive shows good compatibility with other emulsions... view more

Very effective waterbased emulsion which can be used for V-belt production, elastomers. Does not plug air holes. Gives multiple release cycles. Cures instantly and gives the tyre a shiny but dry... view more

Waterbased emulsion used as an antitck and a lubricant for finished goods, latex dippings. Can be used for dry film, tyre building machine lubrication, as an antitack for green rubbers, for rolls... view more

Solventbased PTFE type lubricant, release agent and antitack that provides cold curing, durable films with very low friction. Slightly wet surface, specially formulated for difficult-to-release... view more

McLube 1800 by McLube is water based fluorochemical emulsion. Acts as general purpose release agent. The antistick coatings can be used as a cost effective replacement for silicone oil, soap, wax... view more

Emulsion of a fluorochemical/resin mixture. Used as a release coating in rubber molding processes and as an antitack coating for uncured rubber to replace talc, mica, etc. Economically replaces... view more