ADK STAB 260 by Adeka is phosphite based stabilizer. Provides good heat stability, color, process stability and weatherability to polymers. ADK STAB 260 is suitable for polyester, polyethylene... view more

ADK STAB 522A by Adeka is heat and color stabilizer for high temperature processing. Provides good process stability and weatherability to polymers. ADK STAB 522A is suitable for polyester... view more

ADK STAB P by ADEKA is phosphite type stabilizer. Provides good heat, color & process stability and weatherability to polymers. ADK STAB P by ADEKA is recommended for use in plastics... view more

ADK STAB PEP-11C by ADEKA is phosphite type antioxidant. Provides good heat, color & process stability and weatherability to polymers. ADK STAB PEP-11C is compatible with ABS, PBT, polyester, polystyrene and... view more

ADK STAB QL by Adeka is phosphite type antioxidant. Provides good heat, color & process stability and weatherability to polymers. ADK STAB QL is suitable for polyester, LDPE, PS, PP, PPE, PA, ABS... view more

AKPEROX TBHP 70 by AKPA Kimya is tert-butyl hydroperoxide. It is used for the emulsion polymerization of styrene, acrylates and methacrylates. It is recommended for the curing of polyester resins... view more

Copolymer-based phosphate ester flame retardant. Used for ABS, PC, ABS/PC, HIPS/PPO, PET, PBT... view more

CHEMEX-EC by Dongsung is a polymerization initiator for acrylate, methacrylate, ethylene, and styrene. It is particularly used as a EVA sheet crosslinking agent for solar modules and polyester... view more

Ken-React® KR® 12 supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with phosphato functionality. It has low viscosity and solid content of min. 95%. It can be used in... view more

Ken-React® KR® TTS supplied by FARRL is a titanate product based on titanium IV, class monoalkoxy, with isostearoyl functionality. It has low viscosity and solid content of min. 95%. It helps in... view more

Bisphenol A bis-(diphenylphosphate). Acts as a flame retardant. Possesses very good hydrolytic and heat resistant capabilities. Used for every type of engineering plastic and synthetic fiber, such... view more

SVE -35 FG is a 35% active emulsion of 350 cs polydimethylsiloxane. Acts as a release agent and lubricant. It contains wetting agents that produce a uniform film of silicone on the substrate. SVE... view more

Di(tert.butylperoxy)-3,3,5-trimethylcyclohexane. It acts as an initiator (radical source) for the high pressure polymerization of monomers (e.g. styrene) as well as in the curing of unsaturated... view more