Incroslip™ SL by Cargill acts as anti-scratch and slip agent. It offers long-lasting "> It is stable in applications exposed to UV light. It provides low visible bloom, scuff resistance and mold... view more

PALMESTER 3976 by KLK OLEO is pentaerythritol tetrastearate derived from renewable vegetable oils. It exhibits excellent lubricating properties internally and/or externally in PC and most... view more

PALMOWAX Ethylene Bis Stearamide (EBS) by KLK OLEO is derived from renewable vegetable oils. It exhibits excellent lubricating properties internally and/or externally in most plastics such as ABS... view more

PALMOWAX SPO by KLK OLEO is ethylene bis-oleoamide derived from renewable vegetable oils. It exhibits excellent lubricating properties internally and/or externally in EVA and engineering plastics... view more

PALMOWAX SR by KLK OLEO is ethylene bis-stearamide (EBS) derived from renewable vegetable oils. It enhances softening point, increases flow and adhesion in bitumen & asphalt. It functions as slip &... view more

ADK STAB NA-902 by ADEKA Polymer Additives Europe is a general purpose nucleating agent for PP homopolymer and impact-copolymers. It raises crystallization temperature of PP allowing improved... view more

Luperox® CU80 by Arkema is 80% cumene hydroperoxide. It acts as a polymerization initiator and crosslinking agent. It offers slow gelling and low exotherm properties. It is compatible with polyester... view more

Baerostab NT 170 PS by Baerlocher is a calcium-zinc complex based on 2-EHA-free epoxized soya bean oil. It functions as a stabilizer. It is nonylphenol-free, ptBBA-free, and inexpensive. It is utilized in dip... view more

It is a concentrated, affordable, zero-odor and environment-friendly additive. Exhibits highest temperature stability as compared to other concentrated additives. Capable of inherent... view more

It is a concentrated, affordable, zero-odor and environment-friendly additive. Exhibits highest temperature stability as compared to other concentrated additives. Capable of inherent... view more

MIKROFINE® ADC-PE by HPL Additives is modified azodicarbonamide. It is suitable for compression moulding of rubbers and extruded white rigid PVC sheets. It acts as an azo blowing/ foaming agent... view more

Carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to... view more

Antitack agent suitable especially for the treatment of rubber sheets, strips or granules in Batch-off- or Barwell-equipment working with dip tanks. Does not contain any heavy metal ions. No crusts... view more

Magnesium stearate dispersion. Used in batch-off dip tanks or "simple" dip tanks. Offers better wetting properties... view more

Waterbased emulsion used as an antitck and a lubricant for finished goods, latex dippings. Can be used for dry film, tyre building machine lubrication, as an antitack for green rubbers, for rolls... view more

Solventbased PTFE type lubricant, antitack agent and release agent. Provides a dry, cold curing, durable film with very low friction. Silicone-free. To be applied after mould cleaning as a base... view more

Solventbased PTFE type lubricant, release agent and antitack that provides cold curing, durable films with very low friction. Slightly wet surface, specially formulated for difficult-to-release... view more

UltraGuard™ Solutions by Milliken is a line of performance additives which enable improved moisture barrier of polyethylene films. They facilitate mono-material flexible food packaging with... view more

Dioctyl phthalate. Acts as a plasticizer. It is compatible with most common resins and affords good resin solvation. Is stable to light and heat. Provides the optimum performance at a reasonable... view more

High-performance, multi-resin-compatible reinforcement used for corrosion-resistant hoods and scrubber units, chemical storage tanks, large diameter pipes, boat hulls and decks, housings and... view more