LUVOBATCH® PE BA 7038 by Lehmann & Voss is an exothermic blowing agent. It exhibits controlled foaming process, improved heat "> It offers decorative effects, reduction of cycle time through reduction of melt... view more

LUVOBATCH® PE BA 9538 by Lehmann & Voss is an endothermal blowing agent. It is suitable for polyethylene (PE), polypropylene (PP), ethylene vinyl acetate (EVA), polystyrene (PS) and others. It exhibits controlled... view more

LUVOBATCH® PE BA 9978 by Lehmann & Voss is an exothermic blowing agent suitable for polyethylene (PE), polypropylene (PP), ethylene vinyl acetate (EVA) applications. It is a dust-free, low-cost masterbatch in... view more

LUVOBATCH® PP BA 5373 by Lehmann & Voss is an exothermic blowing agent for polypropylene (PP) applications. It is a dust-free, low-cost masterbatch in granulate form. It exhibits controlled foaming process, good... view more

LUVOBATCH® PP BA 5390 by Lehmann & Voss is an endothermal blowing agent for polypropylene (PP) applications. It offers shorter cycle times, streaking reduction, decorative effects, avoidance of post-inflation, safe... view more

POLYBATCH® PAF 1026 SC by LyondellBasell is an anti-fogging masterbatch. It provides the films long lasting non-fogging at 2-7°C, high transparency, no blooming, printability, sealability and... view more

AID PE F5 by Polytechs is fluorinated copolymer (5%) based antifogging masterbatch in a LLDPE carrier. Provides improved bubble stability, haze reduction, improved gloss and higher output levels... view more

PX 004-V by Polytechs is fully saturated ethylene-propylene copolymer (55%) based cling masterbatch in LLDPE carrier resin. PX 004/V is designed to make LLDPE stretch film by either blown film or... view more

Highly purified erucamide slip masterbatch with PE-LLD as the carrier polymer developed for blown PE-LD films. It is neutral in odor and color. It does not give problems in printing, heat sealing... view more

Highly purified erucamide slip masterbatch with PE-LLD as the carrier polymer developed for blown PE-LD films. It is neutral in odor and color. It does not give problems in printing, heat sealing... view more

RIFRACHEM AGENTE DI PROCESSO FL/11 by Rifra Masterbatches is a processing additive based on LDPE. It offers reduced friction between melted mass & metal parts and aids sliding. It can eliminate... view more

RIFRACHEM AGENTE DI PROCESSO FL/4 by Rifra Masterbatches is a processing additive based on LDPE. It offers reduced friction between melted mass & metal parts and aids sliding. It can eliminate... view more

TOPAS® 8007F-600 by Topas Advanced Polymers is a cyclic olefin copolymer (ethylene-norbornene copolymer) grade. Acts as a glossing agent. It is present as odorless, colorless, water-insoluble... view more

VINNEX® 2523 by Wacker is vinyl acetate. Acts as an impact modifier. Exhibits enhanced flexibility, higher mechanical toughness & optimized crystallinity and enables film blowing with PHB. It has... view more

Vinyl acetate. Acts as an impact modifier. Exhibits enhanced flexibility, higher mechanical toughness & optimized crystallinity and enables film blowing with PHB. It has increased melt strength... view more

Vinyl acetate-vinyl laurate copolymer. Acts as an impact modifier. Exhibits enhanced flexibility, higher mechanical toughness & optimized crystallinity and enables film blowing with PHB. It has... view more

VINNEX® 8880 by Wacker is vinyl acetate-vinyl laurate copolymer. Acts as an impact modifier. Exhibits enhanced flexibility, higher mechanical toughness & optimized crystallinity and enables film... view more