Accelerator 55028 by Nouryon is cobalt accelerator in aliphatic solvent mixture for curing UP resins at ambient temperatures. The curing of unsaturated polyester resins at ambient temperatures can... view more

Accelerator NL-49P by Nouryon is a solution of 1% cobalt in solvent mixture used as an accelerator for curing UP resins at ambient temperatures. The radical formation, which is necessary to start... view more

Accelerator NL-51P by Nouryon is a solution of 6% cobalt in solvent mixture used as an accelerator for curing UP resins at ambient temperatures. The radical formation, which is necessary to start... view more

Accelerator NL-53 by Nouryon is a solution of 10% cobalt in solvent mixture used as an accelerator for curing UP resins at ambient temperatures. It is used in continuous laminating, resin transfer... view more

Accelerator NL-64-100 by Nouryon is a low-reactive amine accelerator used for curing unsaturated polyesters at ambient temperatures. The radical formation, which is necessary to start the... view more

Accelerator NL-65-100 by Nouryon is a high-reactive amine accelerator used for curing unsaturated polyesters at ambient temperatures. It is used in pultrusion, resin transfer molding, filament... view more

Trigonox® 101 by Nouryon is an initiator for the production of controlled rheology polypropylene (CR-PP) in the temperature range 180-250°C. It allows polypropylene producers great flexibility in... view more

Trigonox® 117 by Nouryon is an initiator for (co)polymerization of ethylene, acrylates and methacrylates. It is a curing agent for unsaturated polyester resins. It is used as an initiator for the... view more

Trigonox® 131 by Nouryon is a curing agent. It is used as an initiator for the polymerization and copolymerization of styrene in the temperature range between 100°C and 130°C. It is also an... view more

Trigonox® 141 by Nouryon is an initiator for (co)polymerization of styrene and curing agent for UP and vinylester resins. It is preferred for the curing of unsaturated polyester resin based hot... view more

Trigonox® 17 by Nouryon is an initiator for (co)polymerization of ethylene, styrene, acrylates and methacrylates. It is also used for the cross-linking of natural and synthetic rubbers, as well as... view more

Trigonox® 187-C30 by Nouryon is an initiator (30% active ingredient in odorless mineral spirits) for (co)polymerization of vinylidine chloride. It is developed for the low-temperature polymerization... view more

Trigonox® 21-C70 by Nouryon is an initiator (70% active ingredient in odorless mineral spirits) for (co)polymerization of ethylene, styrene, acrylonitrile and (meth)acrylates. It is used both for... view more

Trigonox® 21S by Nouryon is an initiator for (co)polymerization of LDPE, styrene, acrylonitrile acrylates and methacrylates. It is used both for tubular and autoclave processes. In suspension... view more

Trigonox® 22-E50 by Nouryon is 1,1-di(tert-butylperoxy) cyclohexane, 50% solution in mineral oil. It is used for the bulk polymerization of styrene in the temperature range between 90 and 120°C... view more

Trigonox® 23 by Nouryon is an initiator for the (co)polymerization of ethylene, vinylidene chloride, (meth)acrylates and diethylene glycol bis(allyl carbonate) based optical monomers. It can be... view more

Trigonox® 23-C30 by Nouryon is an initiator (30% active ingredient in odorless mineral spirits) for polymerization of (meth)acrylates and ethylene. It is suitable for production of LDPE. It is used... view more

Trigonox® 23-C75 by Nouryon is an initiator for polymerization of ethylene, vinyl chloride, vinylidene chloride and (meth)acrylates. It is also used for curing unsaturated polyester and vinylester... view more

Trigonox® 25-C25 by Nouryon is an initiator for (co)polymerization of ethylene. It is 25% active ingredient in isododecane. Trigonox® 25-C25 is used both for tubular and autoclave processes. In most... view more

Trigonox® 25-C40 by Nouryon is an initiator (40% active ingredient in odorless mineral spirits) for (co)polymerization of polyethylene (LDPE). It is used for both tubular and autoclave processes. In... view more